320729

Robomop robomop basic Seite 2

2
Zoom out
Zoom in
Vorherige Seite
1/2
Nächste Seite
WARNHINWEISE: • Roboterball erst laden, wenn er vollständig entladen ist. • Verwenden Sie
RoboMop nicht auf nassen oder feuchten Flächen oder dort, wo eine Überschwemmung möglich
ist. • Außerhalb der Reichweite von Kindern aufbewahren.• Stecken Sie das WS-Batterieladegerät
NUR IN EINE WS-STECKDOSE ein. Das Gerät darf nicht mit Umrichtern verwendet werden. Bei
einer derartigen Verwendung erlischt die Garantie sofort.• Verwenden Sie ausschließlich das
WS-Batterieladegerät, das der Hersteller geliefert hat, um dieses Gerät zu laden und wieder
aufzuladen. • Laden Sie das Gerät nur in Innenräumen. • Trennen Sie das WS-Batterieladegerät
nach dem Laden immer von der Wandsteckdose und vom RoboMop.•RoboMop ist nicht für die
Verwendung auf Teppich geeignet.
1. LADDA DEN ELEKTRONISKA BOLLEN
I 3-5 TIMMAR (Se Figur A).
2. TRYCK FAST DEN ELEKTROSTATISKA MOPPEN (Se Figur C).
3. PLACERA ROBOMOP I MITTEN AV RUMMET (Se Figur D).
4. STäLL IN TIMERN
ved å trycke på den gröna on/time knappen (Se Figur E).
5. PLACERA DEN ELEKTRONISKA BOLLEN I RAMEN
PÅ ROBOMOP. RoboMop startar automatiskt efter sex
sekunder. (Se Figur F).
6. AUTOMATISK AVSTäNGNING (Se Figur G).
7. SLäNG DEN FÖRBRUKADE MOPPEN
Släng de använda mopparna i soporna. (Se Figur H).
Slänga dom INTE i toaletten.
DEN ELEKTROSTATISKA MOPPEN KAN
BESTäLLAS PÅ: www.robomop.se
1. OPLAD ROBOT KUGLEN I 3 - 5 TIMER
(Figur A).
2. PÅSÆT EN ELEKTROSTATISK KLUD (Figur C).
3. PLACER MOPPEHOVEDET I MIDTEN AF RUMMET (Figur D).
4.VÆLG RENGØRINGS TID (Figur E).
1. CARICARE LA SFERA ROBOT PER 3-5 ORE
(Vedi. fig. A).
2. DISPOSIZIONE DEL PANNO DI PULIZIA (Vedi. fig. C).
3. COLLOCARE IL TELAIO DEL ROBOMOP AL
CENTRO DELLA STANZA (Vedi. fig. D).
4.SELEZIONE DEL TEMPO DI PULIZIA (Vedi. fig. E).
5. INSERIRE LA SFERA ROBOT NEL TELAIO ROBOMOP
Entro pochi secondi il vostro Robomop inizierà a pulire (Vedi. fig. F).
6.SPEGNIMENTO AUTOMATICO (Vedi. fig. G).
7. ELAMINAZIONE DEI PANNI USA E GETTA
Gettare i panni sporchi nella spazzatura (Vedi. fig. H).
Non gettare nel WC.
COME ORDINARE ULTERIORI PANNETTI:
Visitate il nostro sito: www.robomop.it
1. ROBOTERBALL 3-5 STUNDEN
LADEN (Siehe Abbildung A).
2. EIN ELEKTROSTATISCHES WISCHTUCH
AUFLEGEN (Siehe Abbildung C).
3. WISCHRAHMEN IN DIE RAUMMITTE STELLEN
(Siehe Abbildung D).
4. REINIGUNGSDAUER EINSTELLEN
Grünen ON/TIME-Knopf drücken, der sich an Ihrem RoboMop
unterhalb der grünen LCD-Anzeige auf der linken Seite
befindet (Siehe Abbildung E).
5. ROBOTERBALL IN DEN WISCHRAHMEN LEGEN
Nach 6 Sekunden schaltet sich der RoboMop automatisch
ein (Siehe Abbildung F).
6. AUTOMATISCHE ABSCHALTUNG (Siehe Abbildung G).
7. BESEITIGEN DER WISCHTÜCHER Werfen Sie die gebrauchten
Wischtücher in die Mülltonne (Siehe Abbildung H), nicht in die Toilette.
SIE KÖNNEN DIE EINWEGSPEZIALWISCHTÜCHER GANZ
EINFACH BESTELLEN: Besuchen Sie unsere
Website: www.QVC.de
3. PLACEMENT DU CHASSIS DE NETTOYAGE AU
CENTRE DE LA PIECE (Voir figure D).
4. SELECTION DE LA DUREE DE NETTOYAGE
(Voir figure E).
5. INSERTION DE LA BOULE ROBOTIQUE DANS
LE CHASSIS DE NETTOYAGE. Dans les 6 secondes, le
RoboMop s’allume automatiquement (Voir gure F).
6. ARRET AUTOMATIQUE (Voir figure G).
7. ELIMINATION DES FROTTEURS Jetez les frotteurs souillés à
la poubelle (Voir figure H). Ne pas jeter de frotteurs souillés dans
une toilette.
DEUX FACONS SIMPLES POUR COMMANDER
DES FROTTEURS ELECTROSTATIQUES JETABLES :
Consultez notre site web: www.robomop.net
1. CHARGER LA BOULE ROBOTIQUE
POUR 3 à 5 HEURES (Voir figure A).
2. FIXATION D’UN FROTTEUR ELECTROSTATIQUE
(Voir figure C).
6. APAGADO AUTOMÁTICO (Consulte la figura G).
7. DESECHO DE MOPAS. Deseche las mopas sucias en la
basura. No tire las mopas sucias al retrete. (Consulte la figura H).
PEDIDOS DE MOPAS ELECTROSTÁTICAS
ADICIONALES: Visite nuestro sitio Web en
www.robomop.net
BEDENUNGSANLEITUNG
MANUEL DE L’UTILISATEUR
MANUAL DEL USUARIO
ANVäNDARHANDBOK
OPERATOR’S MANUAL
FREQUENTLY ASKED QUESTIONS:
THIS SET INCLUDES THE FOLLOWING PARTS:
1 Cleaning Frame and 1 Robotic Ball
NOTE:
Read all safety and operating
instructions before operating
your new RoboMop.
1AC Battery Charger
8 Electrostatic Disposable Cloths
2
7
Q. My RoboMop gets stuck. What should I do?
A. Your RoboMop may occasionally get stuck, especially in rooms that
it has not cleaned before. If it does get stuck, RoboMop will try to free
itself by turning in different directions. If it cannot free itself, move or
block any object that RoboMop gets stuck on or under. Once the
problem areas have been amended, pick up your RoboMop and
reposition. Your RoboMop might get stuck for several reasons.
1. It is wedged or pinned between or under narrowly spaced objects.
2. RoboMop bumps into objects and repositions them in such a way
that an exit path no longer exists.
Q. My RoboMop Cleaning Frame has broken. What shall I do?
A. Please contact the local distributor through www.robomop.net.
Q. Are pets and children safe around RoboMop?
A. Children and pets should always be supervised around RoboMop for
optimal safety and cleaning performance.
Q. Does RoboMop clean corners and along the walls?
A. RoboMop cleans next to walls, most corners and other tough to
reach places.
Q. Will it go under kickboards, beds, and furniture?
A. RoboMop has been designed to fit under the kickboards in your
kitchen. If your bed or
furniture is more than 8 cm off the floor, your
RoboMop will happily clean underneath.
Q. How long does it take to recharge the RoboMop?
A. Approximately 3-5 hours.
Q: Will RoboMop clean all floor surfaces?
A: RoboMop cleans hardwood, linoleum, tile, ceramic tile, marble,
granite and other hard floor surfaces.
5
RoboMop is designed to sweep the floors for you so you will have extra time to take care of
more important things or just sit back and relax. Simply attach an electrostatic and dust
absorbing pad, set the cleaning time on the robotic ball, place it in the cleaning frame and
watch RoboMop automatically sweep your floors. Using smart sensor technology, RoboMop
navigates smoothly and silently, cleaning dirty edges under the kitchen counter, in corners,
around walls and under furniture. The flexible edges will not damage furniture. It is great for
all your hard floor surfaces like wood floors, ceramic tile, granite, marble, and linoleum.
The VoltaWebTM dustpads are especially designed to attract and retain as much dust as
possible during the cleaning session. The dust attraction is obtained through the unique
composition of fibres in the cloth that generates static electricity though friction between the
pad and the floor surface. The pad itself is designed with microscopic dust pockets that
absorb and transpor t the dust into the centre of the textile. In this way it is possible for the
textile to attract even more dirt. When the pad is soiled, just remove it and toss it in the
trash.
Enjoy your RoboMop!
OPERATOR’S MANUAL
FREQUENTLY ASKED QUESTIONS:
THIS SET INCLUDES THE FOLLOWING PARTS:
1 Cleaning Frame and 1 Robotic Ball
NOTE:
Read all safety and operating
instructions before operating
your new RoboMop.
1AC Battery Charger
8 Electrostatic Disposable Cloths
2
7
Q. My RoboMop gets stuck. What should I do?
A. Your RoboMop may occasionally get stuck, especially in rooms that
it has not cleaned before. If it does get stuck, RoboMop will try to free
itself by turning in different directions. If it cannot free itself, move or
block any object that RoboMop gets stuck on or under. Once the
problem areas have been amended, pick up your RoboMop and
reposition. Your RoboMop might get stuck for several reasons.
1. It is wedged or pinned between or under narrowly spaced objects.
2. RoboMop bumps into objects and repositions them in such a way
that an exit path no longer exists.
Q. My RoboMop Cleaning Frame has broken. What shall I do?
A. Please contact the local distributor through www.robomop.net.
Q. Are pets and children safe around RoboMop?
A. Children and pets should always be supervised around RoboMop for
optimal safety and cleaning performance.
Q. Does RoboMop clean corners and along the walls?
A. RoboMop cleans next to walls, most corners and other tough to
reach places.
Q. Will it go under kickboards, beds, and furniture?
A. RoboMop has
been designed to fit under the kickboards in your
kitchen. If your bed or furniture is more than 8 cm off the floor, your
RoboMop will happily clean underneath.
Q. How long does it take to recharge the RoboMop?
A. Approximately 3-5 hours.
Q: Will RoboMop clean all floor surfaces?
A: RoboMop cleans hardwood, linoleum, tile, ceramic tile, marble,
granite and other hard floor surfaces.
5
RoboMop is designed to sweep the floors for you so you will have extra time to take care of
more important things or just sit back and relax. Simply attach an electrostatic and dust
absorbing pad, set the cleaning time on the robotic ball, place it in the cleaning frame and
watch RoboMop automatically sweep your floors. Using smart sensor technology, RoboMop
navigates smoothly and silently, cleaning dirty edges under the kitchen counter, in corners,
around walls and under furniture. The flexible edges will not damage furniture. It is great for
all your hard floor surfaces like wood floors, ceramic tile, granite, marble, and linoleum.
The VoltaWebTM dustpads are especially designed to attract and retain as much dust as
possible during the cleaning session. The dust attraction is obtained through the unique
composition of fibres in the cloth that generates static electricity though friction between the
pad and the floor surface. The pad itself is designed with microscopic dust pockets that
absorb and transpor t the dust into the centre of the textile. In this way it is possible for the
textile to attract even more dirt. When the pad is soiled, just remove it and toss it in the
trash.
Enjoy your RoboMop!
OPERATOR’S MANUAL
FREQUENTLY ASKED QUESTIONS:
THIS SET INCLUDES THE FOLLOWING PARTS:
1 Cleaning Frame and 1 Robotic Ball
NOTE:
Read all safety and operating
instructions before operating
your new RoboMop.
1AC Battery Charger
8 Electrostatic Disposable Cloths
2
7
Q. My RoboMop gets stuck. What should I do?
A. Your RoboMop may occasionally get stuck, especially in rooms that
it has not cleaned before. If it does get stuck, RoboMop will try to free
itself by turning in different directions. If it cannot free itself, move or
block any object that RoboMop gets stuck on or under. Once the
problem areas have been amended, pick up your RoboMop and
reposition. Your RoboMop might get stuck for several reasons.
1. It is wedged or pinned between or under narrowly spaced objects.
2. RoboMop bumps into objects and repositions them in such a way
that an exit path no longer exists.
Q. My RoboMop Cleaning Frame has broken. What shall I do?
A. Please contact the local distributor through www.robomop.net.
Q. Are pets and children safe around RoboMop?
A. Children and pets should always be supervised around RoboMop for
optimal safety and cleaning performance.
Q. Does RoboMop clean corners and along the walls?
A. RoboMop cleans next to walls, most corners and other tough to
reach places.
Q. Will it go under kickboards, beds, and furniture?
A. RoboMop has been designed to fit under the kickboards in your
kitchen. If your bed or
furniture is more than 8 cm off the floor, your
RoboMop will happily clean underneath.
Q. How long does it take to recharge the RoboMop?
A. Approximately 3-5 hours.
Q: Will RoboMop clean all floor surfaces?
A: RoboMop cleans hardwood, linoleum, tile, ceramic tile, marble,
granite and other hard floor surfaces.
5
RoboMop is designed to sweep the floors for you so you will have extra time to take care of
more important things or just sit back and relax. Simply attach an electrostatic and dust
absorbing pad, set the cleaning time on the robotic ball, place it in the cleaning frame and
watch RoboMop automatically sweep your floors. Using smart sensor technology, RoboMop
navigates smoothly and silently, cleaning dirty edges under the kitchen counter, in corners,
around walls and under furniture. The flexible edges will not damage furniture. It is great for
all your hard floor surfaces like wood floors, ceramic tile, granite, marble, and linoleum.
The VoltaWebTM dustpads are especially designed to attract and retain as much dust as
possible during the cleaning session. The dust attraction is obtained through the unique
composition of fibres in the cloth that generates static electricity though friction between the
pad and the floor surface. The pad itself is designed with microscopic dust pockets that
absorb and transpor t the dust into the centre of the textile. In this way it is possible for the
textile to attract even more dirt. When the pad is soiled, just remove it and toss it in the
trash.
Enjoy your RoboMop!
OPERATOR’S MANUAL
FREQUENTLY ASKED QUESTIONS:
THIS SET INCLUDES THE FOLLOWING PARTS:
1 Cleaning Frame and 1 Robotic Ball
NOTE:
Read all safety and operating
instructions before operating
your new RoboMop.
1AC Battery Charger
8 Electrostatic Disposable Cloths
2
7
Q. My RoboMop gets stuck. What should I do?
A. Your RoboMop may occasionally get stuck, especially in rooms that
it has not cleaned before. If it does get stuck, RoboMop will try to free
itself by turning in different directions. If it cannot free itself, move or
block any object that RoboMop gets stuck on or under. Once the
problem areas have been amended, pick up your RoboMop and
reposition. Your RoboMop might get stuck for several reasons.
1. It is wedged or pinned between or under narrowly spaced objects.
2. RoboMop bumps into objects and repositions them in such a way
that an exit path no longer exists.
Q. My RoboMop Cleaning Frame has broken. What shall I do?
A. Please contact the local distributor through www.robomop.net.
Q. Are pets and children safe around RoboMop?
A. Children and pets should always be supervised around RoboMop for
optimal safety and cleaning performance.
Q. Does RoboMop clean corners and along the walls?
A. RoboMop cleans next to walls, most corners and other tough to
reach places.
Q. Will it go under kickboards, beds, and furniture?
A. RoboMop has been designed to fit under the kickboards in your
kitchen. If your bed or
furniture is more than 8 cm off the floor, your
RoboMop will happily clean underneath.
Q. How long does it take to recharge the RoboMop?
A. Approximately 3-5 hours.
Q: Will RoboMop clean all floor surfaces?
A: RoboMop cleans hardwood, linoleum, tile, ceramic tile, marble,
granite and other hard floor surfaces.
5
RoboMop is designed to sweep the floors for you so you will have extra time to take care of
more important things or just sit back and relax. Simply attach an electrostatic and dust
absorbing pad, set the cleaning time on the robotic ball, place it in the cleaning frame and
watch RoboMop automatically sweep your floors. Using smart sensor technology, RoboMop
navigates smoothly and silently, cleaning dirty edges under the kitchen counter, in corners,
around walls and under furniture. The flexible edges will not damage furniture. It is great for
all your hard floor surfaces like wood floors, ceramic tile, granite, marble, and linoleum.
The VoltaWebTM dustpads are especially designed to attract and retain as much dust as
possible during the cleaning session. The dust attraction is obtained through the unique
composition of fibres in the cloth that generates static electricity though friction between the
pad and the floor surface. The pad itself is designed with microscopic dust pockets that
absorb and transpor t the dust into the centre of the textile. In this way it is possible for the
textile to attract even more dirt. When the pad is soiled, just remove it and toss it in the
trash.
Enjoy your RoboMop!
x1 x5
OPERATOR’S MANUAL
FREQUENTLY ASKED QUESTIONS:
THIS SET INCLUDES THE FOLLOWING PARTS:
1 Cleaning Frame and 1 Robotic Ball
NOTE:
Read all safety and operating
instructions before operating
your new RoboMop.
1AC Battery Charger
8 Electrostatic Disposable Cloths
2
7
Q. My RoboMop gets stuck. What should I do?
A. Your RoboMop may occasionally get stuck, especially in rooms that
it has not cleaned before. If it does get stuck, RoboMop will try to free
itself by turning in different directions. If it cannot free itself, move or
block any object that RoboMop gets stuck on or under. Once the
problem areas have been amended, pick up your RoboMop and
reposition. Your RoboMop might get stuck for several reasons.
1. It is wedged or pinned between or under narrowly spaced objects.
2. RoboMop bumps into objects and repositions them in such a way
that an exit path no longer exists.
Q. My RoboMop Cleaning Frame has broken. What shall I do?
A. Please contact the local distributor through www.robomop.net.
Q. Are pets and children safe around RoboMop?
A. Children and pets should always be supervised around RoboMop for
optimal safety and cleaning performance.
Q. Does RoboMop clean corners and along the walls?
A. RoboMop cleans next to walls, most corners and other tough to
reach places.
Q. Will it go under kickboards, beds, and furniture?
A. RoboMop has
been designed to fit under the kickboards in your
kitchen. If your bed or furniture is more than 8 cm off the floor, your
RoboMop will happily clean underneath.
Q. How long does it take to recharge the RoboMop?
A. Approximately 3-5 hours.
Q: Will RoboMop clean all floor surfaces?
A: RoboMop cleans hardwood, linoleum, tile, ceramic tile, marble,
granite and other hard floor surfaces.
5
RoboMop is designed to sweep the floors for you so you will have extra time to take care of
more impor tant things or just sit back and relax. Simply attach an electrostatic and dust
absorbing pad, set the cleaning time on the robotic ball, place it in the cleaning frame and
watch RoboMop automatically sweep your floors. Using smart sensor technology, RoboMop
navigates smoothly and silently, cleaning dir ty edges under the kitchen counter, in corners,
around walls and under furniture. The flexible edges will not damage furniture. It is great for
all your hard floor sur faces like wood floors, ceramic tile, granite, marble, and linoleum.
The VoltaWebTM dustpads are especially designed to attract and retain as much dust as
possible during the cleaning session. The dust attraction is obtained through the unique
composition of fibres in the cloth that generates static electricity though friction between the
pad and the floor surface. The pad itself is designed with microscopic dust pockets that
absorb and transport the dust into the centre of the textile. In this way it is possible for the
textile to attract even more dirt. When the pad is soiled, just remove it and toss it in the
trash.
Enjoy your RoboMop!
OPERATOR’S MANUAL
FREQUENTLY ASKED QUESTIONS:
THIS SET INCLUDES THE FOLLOWING PARTS:
1 Cleaning Frame and 1 Robotic Ball
NOTE:
Read all safety and operating
instructions before operating
your new RoboMop.
1AC Battery Charger
8 Electrostatic Disposable Cloths
2
7
Q. My RoboMop gets stuck. What should I do?
A. Your RoboMop may occasionally get stuck, especially in rooms that
it has not cleaned before. If it does get stuck, RoboMop will try to free
itself by turning in different directions. If it cannot free itself, move or
block any object that RoboMop gets stuck on or under. Once the
problem areas have been amended, pick up your RoboMop and
reposition. Your RoboMop might get stuck for several reasons.
1. It is wedged or pinned between or under narrowly spaced objects.
2. RoboMop bumps into objects and repositions them in such a way
that an exit path no longer exists.
Q. My RoboMop Cleaning Frame has broken. What shall I do?
A. Please contact the local distributor through www.robomop.net.
Q. Are pets and children safe around RoboMop?
A. Children and pets should always be supervised around RoboMop for
optimal safety and cleaning performance.
Q. Does RoboMop clean corners and along the walls?
A. RoboMop cleans next to walls, most corners and other tough to
reach places.
Q. Will it go under kickboards, beds, and furniture?
A. RoboMop has
been designed to fit under the kickboards in your
kitchen. If your bed or furniture is more than 8 cm off the floor, your
RoboMop will happily clean underneath.
Q. How long does it take to recharge the RoboMop?
A. Approximately 3-5 hours.
Q: Will RoboMop clean all floor surfaces?
A: RoboMop cleans hardwood, linoleum, tile, ceramic tile, marble,
granite and other hard floor surfaces.
5
RoboMop is designed to sweep the floors for you so you will have extra time to take care of
more impor tant things or just sit back and relax. Simply attach an electrostatic and dust
absorbing pad, set the cleaning time on the robotic ball, place it in the cleaning frame and
watch RoboMop automatically sweep your floors. Using smart sensor technology, RoboMop
navigates smoothly and silently, cleaning dir ty edges under the kitchen counter, in corners,
around walls and under furniture. The flexible edges will not damage furniture. It is great for
all your hard floor sur faces like wood floors, ceramic tile, granite, marble, and linoleum.
The VoltaWebTM dustpads are especially designed to attract and retain as much dust as
possible during the cleaning session. The dust attraction is obtained through the unique
composition of fibres in the cloth that generates static electricity though friction between the
pad and the floor surface. The pad itself is designed with microscopic dust pockets that
absorb and transport the dust into the centre of the textile. In this way it is possible for the
textile to attract even more dirt. When the pad is soiled, just remove it and toss it in the
trash.
Enjoy your RoboMop!
x1
x1 x5
OPERATOR’S MANUAL
FREQUENTLY ASKED QUESTIONS:
THIS SET INCLUDES THE FOLLOWING PARTS:
1 Cleaning Frame and 1 Robotic Ball
NOTE:
Read all safety and operating
instructions before operating
your new RoboMop.
1AC Battery Charger
8 Electrostatic Disposable Cloths
2
7
Q. My RoboMop gets stuck. What should I do?
A. Your RoboMop may occasionally get stuck, especially in rooms that
it has not cleaned before. If it does get stuck, RoboMop will try to free
itself by turning in different directions. If it cannot free itself, move or
block any object that RoboMop gets stuck on or under. Once the
problem areas have been amended, pick up your RoboMop and
reposition. Your RoboMop might get stuck for several reasons.
1. It is wedged or pinned between or under narrowly spaced objects.
2. RoboMop bumps into objects and repositions them in such a way
that an exit path no longer exists.
Q. My RoboMop Cleaning Frame has broken. What shall I do?
A. Please contact the local distributor through www.robomop.net.
Q. Are pets and children safe around RoboMop?
A. Children and pets should always be supervised around RoboMop for
optimal safety and cleaning performance.
Q. Does RoboMop clean corners and along the walls?
A. RoboMop cleans next to walls, most corners and other tough to
reach places.
Q. Will it go under kickboards, beds, and furniture?
A. RoboMop has
been designed to fit under the kickboards in your
kitchen. If your bed or furniture is more than 8 cm off the floor, your
RoboMop will happily clean underneath.
Q. How long does it take to recharge the RoboMop?
A. Approximately 3-5 hours.
Q: Will RoboMop clean all floor surfaces?
A: RoboMop cleans hardwood, linoleum, tile, ceramic tile, marble,
granite and other hard floor surfaces.
5
RoboMop is designed to sweep the floors for you so you will have extra time to take care of
more impor tant things or just sit back and relax. Simply attach an electrostatic and dust
absorbing pad, set the cleaning time on the robotic ball, place it in the cleaning frame and
watch RoboMop automatically sweep your floors. Using smart sensor technology, RoboMop
navigates smoothly and silently, cleaning dir ty edges under the kitchen counter, in corners,
around walls and under furniture. The flexible edges will not damage furniture. It is great for
all your hard floor sur faces like wood floors, ceramic tile, granite, marble, and linoleum.
The VoltaWebTM dustpads are especially designed to attract and retain as much dust as
possible during the cleaning session. The dust attraction is obtained through the unique
composition of fibres in the cloth that generates static electricity though friction between the
pad and the floor surface. The pad itself is designed with microscopic dust pockets that
absorb and transport the dust into the centre of the textile. In this way it is possible for the
textile to attract even more dirt. When the pad is soiled, just remove it and toss it in the
trash.
Enjoy your RoboMop!
OPERATOR’S MANUAL
FREQUENTLY ASKED QUESTIONS:
THIS SET INCLUDES THE FOLLOWING PARTS:
1 Cleaning Frame and 1 Robotic Ball
NOTE:
Read all safety and operating
instructions before operating
your new RoboMop.
1AC Battery Charger
8 Electrostatic Disposable Cloths
2
7
Q. My RoboMop gets stuck. What should I do?
A. Your RoboMop may occasionally get stuck, especially in rooms that
it has not cleaned before. If it does get stuck, RoboMop will try to free
itself by turning in different directions. If it cannot free itself, move or
block any object that RoboMop gets stuck on or under. Once the
problem areas have been amended, pick up your RoboMop and
reposition. Your RoboMop might get stuck for several reasons.
1. It is wedged or pinned between or under narrowly spaced objects.
2. RoboMop bumps into objects and repositions them in such a way
that an exit path no longer exists.
Q. My RoboMop Cleaning Frame has broken. What shall I do?
A. Please contact the local distributor through www.robomop.net.
Q. Are pets and children safe around RoboMop?
A. Children and pets should always be supervised around RoboMop for
optimal safety and cleaning performance.
Q. Does RoboMop clean corners and along the walls?
A. RoboMop cleans next to walls, most corners and other tough to
reach places.
Q. Will it go under kickboards, beds, and furniture?
A. RoboMop has been designed to fit under the kickboards in your
kitchen. If your bed or
furniture is more than 8 cm off the floor, your
RoboMop will happily clean underneath.
Q. How long does it take to recharge the RoboMop?
A. Approximately 3-5 hours.
Q: Will RoboMop clean all floor surfaces?
A: RoboMop cleans hardwood, linoleum, tile, ceramic tile, marble,
granite and other hard floor surfaces.
5
RoboMop is designed to sweep the floors for you so you will have extra time to take care of
more impor tant things or just sit back and relax. Simply attach an electrostatic and dust
absorbing pad, set the cleaning time on the robotic ball, place it in the cleaning frame and
watch RoboMop automatically sweep your floors. Using smart sensor technology, RoboMop
navigates smoothly and silently, cleaning dir ty edges under the kitchen counter, in corners,
around walls and under furniture. The flexible edges will not damage furniture. It is great for
all your hard floor sur faces like wood floors, ceramic tile, granite, marble, and linoleum.
The VoltaWebTM dustpads are especially designed to attract and retain as much dust as
possible during the cleaning session. The dust attraction is obtained through the unique
composition of fibres in the cloth that generates static electricity though friction between the
pad and the floor surface. The pad itself is designed with microscopic dust pockets that
absorb and transport the dust into the centre of the textile. In this way it is possible for the
textile to attract even more dirt. When the pad is soiled, just remove it and toss it in the
trash.
Enjoy your RoboMop!
x1
x1 x5
OPERATOR’S MANUAL
FREQUENTLY ASKED QUESTIONS:
THIS SET INCLUDES THE FOLLOWING PARTS:
1 Cleaning Frame and 1 Robotic Ball
NOTE:
Read all safety and operating
instructions before operating
your new RoboMop.
1AC Battery Charger
8 Electrostatic Disposable Cloths
2
7
Q. My RoboMop gets stuck. What should I do?
A. Your RoboMop may occasionally get stuck, especially in rooms that
it has not cleaned before. If it does get stuck, RoboMop will try to free
itself by turning in different directions. If it cannot free itself, move or
block any object that RoboMop gets stuck on or under. Once the
problem areas have been amended, pick up your RoboMop and
reposition. Your RoboMop might get stuck for several reasons.
1. It is wedged or pinned between or under narrowly spaced objects.
2. RoboMop bumps into objects and repositions them in such a way
that an exit path no longer exists.
Q. My RoboMop Cleaning Frame has broken. What shall I do?
A. Please contact the local distributor through www.robomop.net.
Q. Are pets and children safe around RoboMop?
A. Children and pets should always be supervised around RoboMop for
optimal safety and cleaning performance.
Q. Does RoboMop clean corners and along the walls?
A. RoboMop cleans next to walls, most corners and other tough to
reach places.
Q. Will it go under kickboards, beds, and furniture?
A. RoboMop has
been designed to fit under the kickboards in your
kitchen. If your bed or furniture is more than 8 cm off the floor, your
RoboMop will happily clean underneath.
Q. How long does it take to recharge the RoboMop?
A. Approximately 3-5 hours.
Q: Will RoboMop clean all floor surfaces?
A: RoboMop cleans hardwood, linoleum, tile, ceramic tile, marble,
granite and other hard floor surfaces.
5
RoboMop is designed to sweep the floors for you so you will have extra time to take care of
more impor tant things or just sit back and relax. Simply attach an electrostatic and dust
absorbing pad, set the cleaning time on the robotic ball, place it in the cleaning frame and
watch RoboMop automatically sweep your floors. Using smart sensor technology, RoboMop
navigates smoothly and silently, cleaning dir ty edges under the kitchen counter, in corners,
around walls and under furniture. The flexible edges will not damage furniture. It is great for
all your hard floor sur faces like wood floors, ceramic tile, granite, marble, and linoleum.
The VoltaWebTM dustpads are especially designed to attract and retain as much dust as
possible during the cleaning session. The dust attraction is obtained through the unique
composition of fibres in the cloth that generates static electricity though friction between the
pad and the floor surface. The pad itself is designed with microscopic dust pockets that
absorb and transport the dust into the centre of the textile. In this way it is possible for the
textile to attract even more dirt. When the pad is soiled, just remove it and toss it in the
trash.
Enjoy your RoboMop!
OPERATOR’S MANUAL
FREQUENTLY ASKED QUESTIONS:
THIS SET INCLUDES THE FOLLOWING PARTS:
1 Cleaning Frame and 1 Robotic Ball
NOTE:
Read all safety and operating
instructions before operating
your new RoboMop.
1AC Battery Charger
8 Electrostatic Disposable Cloths
2
7
Q. My RoboMop gets stuck. What should I do?
A. Your RoboMop may occasionally get stuck, especially in rooms that
it has not cleaned before. If it does get stuck, RoboMop will try to free
itself by turning in different directions. If it cannot free itself, move or
block any object that RoboMop gets stuck on or under. Once the
problem areas have been amended, pick up your RoboMop and
reposition. Your RoboMop might get stuck for several reasons.
1. It is wedged or pinned between or under narrowly spaced objects.
2. RoboMop bumps into objects and repositions them in such a way
that an exit path no longer exists.
Q. My RoboMop Cleaning Frame has broken. What shall I do?
A. Please contact the local distributor through www.robomop.net.
Q. Are pets and children safe around RoboMop?
A. Children and pets should always be supervised around RoboMop for
optimal safety and cleaning performance.
Q. Does RoboMop clean corners and along the walls?
A. RoboMop cleans next to walls, most corners and other tough to
reach places.
Q. Will it go under kickboards, beds, and furniture?
A. RoboMop has been designed to fit under the kickboards in your
kitchen. If your bed or
furniture is more than 8 cm off the floor, your
RoboMop will happily clean underneath.
Q. How long does it take to recharge the RoboMop?
A. Approximately 3-5 hours.
Q: Will RoboMop clean all floor surfaces?
A: RoboMop cleans hardwood, linoleum, tile, ceramic tile, marble,
granite and other hard floor surfaces.
5
RoboMop is designed to sweep the floors for you so you will have extra time to take care of
more impor tant things or just sit back and relax. Simply attach an electrostatic and dust
absorbing pad, set the cleaning time on the robotic ball, place it in the cleaning frame and
watch RoboMop automatically sweep your floors. Using smart sensor technology, RoboMop
navigates smoothly and silently, cleaning dir ty edges under the kitchen counter, in corners,
around walls and under furniture. The flexible edges will not damage furniture. It is great for
all your hard floor sur faces like wood floors, ceramic tile, granite, marble, and linoleum.
The VoltaWebTM dustpads are especially designed to attract and retain as much dust as
possible during the cleaning session. The dust attraction is obtained through the unique
composition of fibres in the cloth that generates static electricity though friction between the
pad and the floor surface. The pad itself is designed with microscopic dust pockets that
absorb and transport the dust into the centre of the textile. In this way it is possible for the
textile to attract even more dirt. When the pad is soiled, just remove it and toss it in the
trash.
Enjoy your RoboMop!
x1
x1 x5
OPERATOR’S MANUAL
FREQUENTLY ASKED QUESTIONS:
THIS SET INCLUDES THE FOLLOWING PARTS:
1 Cleaning Frame and 1 Robotic Ball
NOTE:
Read all safety and operating
instructions before operating
your new RoboMop.
1AC Battery Charger
8 Electrostatic Disposable Cloths
2
7
Q. My RoboMop gets stuck. What should I do?
A. Your RoboMop may occasionally get stuck, especially in rooms that
it has not cleaned before. If it does get stuck, RoboMop will try to free
itself by turning in different directions. If it cannot free itself, move or
block any object that RoboMop gets stuck on or under. Once the
problem areas have been amended, pick up your RoboMop and
reposition. Your RoboMop might get stuck for several reasons.
1. It is wedged or pinned between or under narrowly spaced objects.
2. RoboMop bumps into objects and repositions them in such a way
that an exit path no longer exists.
Q. My RoboMop Cleaning Frame has broken. What shall I do?
A. Please contact the local distributor through www.robomop.net.
Q. Are pets and children safe around RoboMop?
A. Children and pets should always be supervised around RoboMop for
optimal safety and cleaning performance.
Q. Does RoboMop clean corners and along the walls?
A. RoboMop cleans next to walls, most corners and other tough to
reach places.
Q. Will it go under kickboards, beds, and furniture?
A. RoboMop has been designed to fit under the kickboards in your
kitchen. If your bed or
furniture is more than 8 cm off the floor, your
RoboMop will happily clean underneath.
Q. How long does it take to recharge the RoboMop?
A. Approximately 3-5 hours.
Q: Will RoboMop clean all floor surfaces?
A: RoboMop cleans hardwood, linoleum, tile, ceramic tile, marble,
granite and other hard floor surfaces.
5
RoboMop is designed to sweep the floors for you so you will have extra time to take care of
more impor tant things or just sit back and relax. Simply attach an electrostatic and dust
absorbing pad, set the cleaning time on the robotic ball, place it in the cleaning frame and
watch RoboMop automatically sweep your floors. Using smart sensor technology, RoboMop
navigates smoothly and silently, cleaning dir ty edges under the kitchen counter, in corners,
around walls and under furniture. The flexible edges will not damage furniture. It is great for
all your hard floor sur faces like wood floors, ceramic tile, granite, marble, and linoleum.
The VoltaWebTM dustpads are especially designed to attract and retain as much dust as
possible during the cleaning session. The dust attraction is obtained through the unique
composition of fibres in the cloth that generates static electricity though friction between the
pad and the floor surface. The pad itself is designed with microscopic dust pockets that
absorb and transport the dust into the centre of the textile. In this way it is possible for the
textile to attract even more dirt. When the pad is soiled, just remove it and toss it in the
trash.
Enjoy your RoboMop!
x1
x1 x5
OPERATOR’S MANUAL
FREQUENTLY ASKED QUESTIONS:
THIS SET INCLUDES THE FOLLOWING PARTS:
1 Cleaning Frame and 1 Robotic Ball
NOTE:
Read all safety and operating
instructions before operating
your new RoboMop.
1AC Battery Charger
8 Electrostatic Disposable Cloths
2
7
Q. My RoboMop gets stuck. What should I do?
A. Your RoboMop may occasionally get stuck, especially in rooms that
it has not cleaned before. If it does get stuck, RoboMop will try to free
itself by turning in different directions. If it cannot free itself, move or
block any object that RoboMop gets stuck on or under. Once the
problem areas have been amended, pick up your RoboMop and
reposition. Your RoboMop might get stuck for several reasons.
1. It is wedged or pinned between or under narrowly spaced objects.
2. RoboMop bumps into objects and repositions them in such a way
that an exit path no longer exists.
Q. My RoboMop Cleaning Frame has broken. What shall I do?
A. Please contact the local distributor through www.robomop.net.
Q. Are pets and children safe around RoboMop?
A. Children and pets should always be supervised around RoboMop for
optimal safety and cleaning performance.
Q. Does RoboMop clean corners and along the walls?
A. RoboMop cleans next to walls, most corners and other tough to
reach places.
Q. Will it go under kickboards, beds, and furniture?
A. RoboMop has been designed to fit under the kickboards in your
kitchen. If your bed or
furniture is more than 8 cm off the floor, your
RoboMop will happily clean underneath.
Q. How long does it take to recharge the RoboMop?
A. Approximately 3-5 hours.
Q: Will RoboMop clean all floor surfaces?
A: RoboMop cleans hardwood, linoleum, tile, ceramic tile, marble,
granite and other hard floor surfaces.
5
RoboMop is designed to sweep the floors for you so you will have extra time to take care of
more impor tant things or just sit back and relax. Simply attach an electrostatic and dust
absorbing pad, set the cleaning time on the robotic ball, place it in the cleaning frame and
watch RoboMop automatically sweep your floors. Using smart sensor technology, RoboMop
navigates smoothly and silently, cleaning dir ty edges under the kitchen counter, in corners,
around walls and under furniture. The flexible edges will not damage furniture. It is great for
all your hard floor sur faces like wood floors, ceramic tile, granite, marble, and linoleum.
The VoltaWebTM dustpads are especially designed to attract and retain as much dust as
possible during the cleaning session. The dust attraction is obtained through the unique
composition of fibres in the cloth that generates static electricity though friction between the
pad and the floor surface. The pad itself is designed with microscopic dust pockets that
absorb and transport the dust into the centre of the textile. In this way it is possible for the
textile to attract even more dirt. When the pad is soiled, just remove it and toss it in the
trash.
Enjoy your RoboMop!
x1
x1 x5
OPERATOR’S MANUAL
FREQUENTLY ASKED QUESTIONS:
THIS SET INCLUDES THE FOLLOWING PARTS:
1 Cleaning Frame and 1 Robotic Ball
NOTE:
Read all safety and operating
instructions before operating
your new RoboMop.
1AC Battery Charger
8 Electrostatic Disposable Cloths
2
7
Q. My RoboMop gets stuck. What should I do?
A. Your RoboMop may occasionally get stuck, especially in rooms that
it has not cleaned before. If it does get stuck, RoboMop will try to free
itself by turning in different directions. If it cannot free itself, move or
block any object that RoboMop gets stuck on or under. Once the
problem areas have been amended, pick up your RoboMop and
reposition. Your RoboMop might get stuck for several reasons.
1. It is wedged or pinned between or under narrowly spaced objects.
2. RoboMop bumps into objects and repositions them in such a way
that an exit path no longer exists.
Q. My RoboMop Cleaning Frame has broken. What shall I do?
A. Please contact the local distributor through www.robomop.net.
Q. Are pets and children safe around RoboMop?
A. Children and pets should always be supervised around RoboMop for
optimal safety and cleaning performance.
Q. Does RoboMop clean corners and along the walls?
A. RoboMop cleans next to walls, most corners and other tough to
reach places.
Q. Will it go under kickboards, beds, and furniture?
A. RoboMop has
been designed to fit under the kickboards in your
kitchen. If your bed or furniture is more than 8 cm off the floor, your
RoboMop will happily clean underneath.
Q. How long does it take to recharge the RoboMop?
A. Approximately 3-5 hours.
Q: Will RoboMop clean all floor surfaces?
A: RoboMop cleans hardwood, linoleum, tile, ceramic tile, marble,
granite and other hard floor surfaces.
5
RoboMop is designed to sweep the floors for you so you will have extra time to take care of
more impor tant things or just sit back and relax. Simply attach an electrostatic and dust
absorbing pad, set the cleaning time on the robotic ball, place it in the cleaning frame and
watch RoboMop automatically sweep your floors. Using smart sensor technology, RoboMop
navigates smoothly and silently, cleaning dir ty edges under the kitchen counter, in corners,
around walls and under furniture. The flexible edges will not damage furniture. It is great for
all your hard floor sur faces like wood floors, ceramic tile, granite, marble, and linoleum.
The VoltaWebTM dustpads are especially designed to attract and retain as much dust as
possible during the cleaning session. The dust attraction is obtained through the unique
composition of fibres in the cloth that generates static electricity though friction between the
pad and the floor surface. The pad itself is designed with microscopic dust pockets that
absorb and transport the dust into the centre of the textile. In this way it is possible for the
textile to attract even more dirt. When the pad is soiled, just remove it and toss it in the
trash.
Enjoy your RoboMop!
OPERATOR’S MANUAL
FREQUENTLY ASKED QUESTIONS:
THIS SET INCLUDES THE FOLLOWING PARTS:
1 Cleaning Frame and 1 Robotic Ball
NOTE:
Read all safety and operating
instructions before operating
your new RoboMop.
1AC Battery Charger
8 Electrostatic Disposable Cloths
2
7
Q. My RoboMop gets stuck. What should I do?
A. Your RoboMop may occasionally get stuck, especially in rooms that
it has not cleaned before. If it does get stuck, RoboMop will try to free
itself by turning in different directions. If it cannot free itself, move or
block any object that RoboMop gets stuck on or under. Once the
problem areas have been amended, pick up your RoboMop and
reposition. Your RoboMop might get stuck for several reasons.
1. It is wedged or pinned between or under narrowly spaced objects.
2. RoboMop bumps into objects and repositions them in such a way
that an exit path no longer exists.
Q. My RoboMop Cleaning Frame has broken. What shall I do?
A. Please contact the local distributor through www.robomop.net.
Q. Are pets and children safe around RoboMop?
A. Children and pets should always be supervised around RoboMop for
optimal safety and cleaning performance.
Q. Does RoboMop clean corners and along the walls?
A. RoboMop cleans next to walls, most corners and other tough to
reach places.
Q. Will it go under kickboards, beds, and furniture?
A. RoboMop has been designed to fit under the kickboards in your
kitchen. If your bed or
furniture is more than 8 cm off the floor, your
RoboMop will happily clean underneath.
Q. How long does it take to recharge the RoboMop?
A. Approximately 3-5 hours.
Q: Will RoboMop clean all floor surfaces?
A: RoboMop cleans hardwood, linoleum, tile, ceramic tile, marble,
granite and other hard floor surfaces.
5
RoboMop is designed to sweep the floors for you so you will have extra time to take care of
more impor tant things or just sit back and relax. Simply attach an electrostatic and dust
absorbing pad, set the cleaning time on the robotic ball, place it in the cleaning frame and
watch RoboMop automatically sweep your floors. Using smart sensor technology, RoboMop
navigates smoothly and silently, cleaning dir ty edges under the kitchen counter, in corners,
around walls and under furniture. The flexible edges will not damage furniture. It is great for
all your hard floor sur faces like wood floors, ceramic tile, granite, marble, and linoleum.
The VoltaWebTM dustpads are especially designed to attract and retain as much dust as
possible during the cleaning session. The dust attraction is obtained through the unique
composition of fibres in the cloth that generates static electricity though friction between the
pad and the floor surface. The pad itself is designed with microscopic dust pockets that
absorb and transport the dust into the centre of the textile. In this way it is possible for the
textile to attract even more dirt. When the pad is soiled, just remove it and toss it in the
trash.
Enjoy your RoboMop!
x1
CHARGE THE ROBOTIC
BALL FOR 3-5 HOURS
Before initial use, charge the ball.
Insert the plug of the AC Battery
Charger into the Charger Port
jack of the Robotic Ball.
(See Figure A) Plug the AC
Battery Charger into a voltage tape
AC Outlet ONLY. (See Figure B)
The ball will fully charge in about
3-5 hours. Recharge the unit only
when it is completely discharged.
ATTACH ONE
ELECTROST A TIC PAD
Attach one disposable electrostatic
pad to the underside of the
Cleaning Frame and secure by
pushing the pad down onto the
black velcro tabs on the
Cleaning Frame. (See Figure C)
STEP BY STEP GUIDE:
2
step
1
step
FOR OPTIMAL CLEANING PERFORMANCE:
HELPFUL ROOM CLEANING TIPS:
PLACE THE CLEANING
FRAME IN THE CENTER
OF THE ROOM
Clear the room. Place the
Cleaning Frame in the center of the
room. (See Figure D) For prepa-
ration hints for clearing the room,
see page 6 of this operator’s man-
ual for our “For Optimal Cleaning
Performance” tips.”
Figure A
Figure B
Figure C
Figure D
RoboMop may come
upon a piece of furniture
like this couch, which
RoboMop can get
wedged up against and
get stuck. If RoboMop
can’t get out, just pull it
out and set it back to work
again. Or you can put a
small object in front of it,
so RoboMop can’t get
stuck underneath.
RoboMop can get
trapped between or
behind your furniture
because the entrance to
an area is barely big
enough for RoboMop
to fit through. Placing a
chair or plant in front of
the piece of furniture,
can solve the trouble so
it won’t stop working.
RoboMop may bump
into small items that can
spill and make a mess.
To make sure RoboMop
can clean the whole
floor; pick up any small
objects, just as you do
before you vacuum.
AVOID GETTING STUCK
AVOID MESSY SPILLS DON’T GET TRAPPED
3
step
For optimal cleaning performance, clear your floor of objects just as you would
before using a regular vacuum cleaner. Do not leave the following items on the
floor: clothing, loose papers, pull cords for blinds or curtains, power cords, or any
fragile items. RoboMop contacts walls, furniture and other objects as it cleans, so
please remove any items that may be pushed and knocked over by light contact
from RoboMop. If your room does not have a door, or there is access to a stairway
where RoboMop can fall down the stairs, simply block off the area with either a
chair, plant, gate or other object.
www.robomop.net
velcro tab
3
6
4
step
5
step
7
step
STEP BY STEP GUIDE:
WARNINGS:
• Read all safety and operating instructions before operating RoboMop.
• Retain the safety and operating instructions for future reference.
• Always be careful when using your RoboMop. To reduce the risk
of injury or damage, keep these safety precautions in mind when
setting up, using and maintaining your equipment.
• RoboMop must not be used for any other purpose other than its
intended use.
• Store out of reach of children.
• Do not bend the Cleaning Frame.
• Charge the robotic ball only when it is completely discharged.
• This is an indoor device only.
• Do not use RoboMop on wet or damp surfaces or where immersion
in water is a possibility.
• Operate your RoboMop only from the type of power source indicated
in this manual. If you are not sure of the type of power supplied to
your home, consult your local power company.
• Plug the AC Battery Charger into a voltage tape AC OUTLET ONLY.
Product may not be used with any type of power converter.
Any such use will immediately void the Warranty.
• Use only the AC Battery Charger supplied by the manufacturer
to charge and recharge
this device.
• Charge indoors only.
• Never handle the AC Battery Charger with wet hands.
• Always remove AC Battery Charger from wall and disconnect
RoboMop after charging.
• RoboMop is not for use on carpets.
• RoboMop is designed to clean one room at a time. Confine
RoboMop to the room you want cleaned by closing all doors.
• Observe RoboMop the first time it cleans a room to confirm it does
not get wedged under or stuck on top of uneven surfaces.
• The Cleaning Frame should not be washed. Clean softly with a
duster or clean with a dry soft cloth.
• Use the specifically designed electrostatic pads on dry floors only.
• Protect the Cleaning Frame from bending, warping or folding.
• When RoboMop is finished cleaning, remove RoboMop from the floor
to avoid tripping over it.
INSERT THE ROBOTIC BALL
IN THE CLEANING FRAME
Place the RoboMop ball into the
center of the Cleaning Frame.
Within 6 seconds, the RoboMop
will turn itself on automatically.
(See Figure F)
DISPOSAL OF PADS
Dispose soiled pads in the trash .
(See Figure H) Do not dispose
soiled pads in the toilet.
AUTOMATIC SHUT OFF
RoboMop will automatically shut
off when the program is complete,
based on the time you set it to. To
stop the RoboMop at any time,
simply press the Red OFF button.
When RoboMop is finished clean-
ing, remove it from the floor
to avoid tripping or falling over it.
(See Figure G)
6
step
Figure E
Figure F
Figure G
Figure H
54
SELECT CLEANING TIME
Press the Green ON/TIME button
located on your RoboMop under
the LCD screen on the left.
(See Figure E) The LCD display
screen will show the amount of
time the RoboMop will clean your
floor. To choose 1 hour and 30
minutes, press the ON/TIME but-
ton once. To choose 1 hour, press
the ON/TIME button twice. To
choose 30 minutes, press the
ON/TIME button three times.
Once you have chosen the time,
the ON/TIME button on the LCD
screen will flash 6X before turning
on automatically, allowing you
sufficient time to place the ball in
the Cleaning Frame.
4
step
5
step
7
step
STEP BY STEP GUIDE:
WARNINGS:
• Read all safety and operating instructions before operating RoboMop.
• Retain the safety and operating instructions for future reference.
• Always be careful when using your RoboMop. To reduce the risk
of injury or damage, keep these safety precautions in mind when
setting up, using and maintaining your equipment.
• RoboMop must not be used for any other purpose other than its
intended use.
• Store out of reach of children.
• Do not bend the Cleaning Frame.
• Charge the robotic ball only when it is completely discharged.
• This is an indoor device only.
• Do not use RoboMop on wet or damp surfaces or where immersion
in water is a possibility.
• Operate your RoboMop only from the type of power source indicated
in this manual. If you are not sure of the type of power supplied to
your home, consult your local power company.
• Plug the AC Battery Charger into a voltage tape AC OUTLET ONLY.
Product may not be used with any type of power converter.
Any such use will immediately void the Warranty.
• Use only the AC Battery Charger supplied by the manufacturer
to charge and recharge
this device.
• Charge indoors only.
• Never handle the AC Battery Charger with wet hands.
• Always remove AC Battery Charger from wall and disconnect
RoboMop after charging.
• RoboMop is not for use on carpets.
• RoboMop is designed to clean one room at a time. Confine
RoboMop to the room you want cleaned by closing all doors.
• Observe RoboMop the first time it cleans a room to confirm it does
not get wedged under or stuck on top of uneven surfaces.
• The Cleaning Frame should not be washed. Clean softly with a
duster or clean with a dry soft cloth.
• Use the specifically designed electrostatic pads on dry floors only.
• Protect the Cleaning Frame from bending, warping or folding.
• When RoboMop is finished cleaning, remove RoboMop from the floor
to avoid tripping over it.
INSERT THE ROBOTIC BALL
IN THE CLEANING FRAME
Place the RoboMop ball into the
center of the Cleaning Frame.
Within 6 seconds, the RoboMop
will turn itself on automatically.
(See Figure F)
DISPOSAL OF PADS
Dispose soiled pads in the trash .
(See Figure H) Do not dispose
soiled pads in the toilet.
AUTOMATIC SHUT OFF
RoboMop will automatically shut
off when the program is complete,
based on the time you set it to. To
stop the RoboMop at any time,
simply press the Red OFF button.
When RoboMop is finished clean-
ing, remove it from the floor
to avoid tripping or falling over it.
(See Figure G)
6
step
Figure E
Figure F
Figure G
Figure H
54
SELECT CLEANING TIME
Press the Green ON/TIME button
located on your RoboMop under
the LCD screen on the left.
(See Figure E) The LCD display
screen will show the amount of
time the RoboMop will clean your
floor. To choose 1 hour and 30
minutes, press the ON/TIME but-
ton once. To choose 1 hour, press
the ON/TIME button twice. To
choose 30 minutes, press the
ON/TIME button three times.
Once you have chosen the time,
the ON/TIME button on the LCD
screen will flash 6X before turning
on automatically, allowing you
sufficient time to place the ball in
the Cleaning Frame.
4
step
5
step
7
step
STEP BY STEP GUIDE:
WARNINGS:
• Read all safety and operating instructions before operating RoboMop.
• Retain the safety and operating instructions for future reference.
• Always be careful when using your RoboMop. To reduce the risk
of injury or damage, keep these safety precautions in mind when
setting up, using and maintaining your equipment.
• RoboMop must not be used for any other purpose other than its
intended use.
• Store out of reach of children.
• Do not bend the Cleaning Frame.
• Charge the robotic ball only when it is completely discharged.
• This is an indoor device only.
• Do not use RoboMop on wet or damp surfaces or where immersion
in water is a possibility.
• Operate your RoboMop only from the type of power source indicated
in this manual. If you are not sure of the type of power supplied to
your home, consult your local power company.
• Plug the AC Battery Charger into a voltage tape AC OUTLET ONLY.
Product may not be used with any type of power converter.
Any such use will immediately void the Warranty.
• Use only the AC Battery Charger supplied by the manufacturer
to charge and recharge
this device.
• Charge indoors only.
• Never handle the AC Battery Charger with wet hands.
• Always remove AC Battery Charger from wall and disconnect
RoboMop after charging.
• RoboMop is not for use on carpets.
• RoboMop is designed to clean one room at a time. Confine
RoboMop to the room you want cleaned by closing all doors.
• Observe RoboMop the first time it cleans a room to confirm it does
not get wedged under or stuck on top of uneven surfaces.
• The Cleaning Frame should not be washed. Clean softly with a
duster or clean with a dry soft cloth.
• Use the specifically designed electrostatic pads on dry floors only.
• Protect the Cleaning Frame from bending, warping or folding.
• When RoboMop is finished cleaning, remove RoboMop from the floor
to avoid tripping over it.
INSERT THE ROBOTIC BALL
IN THE CLEANING FRAME
Place the RoboMop ball into the
center of the Cleaning Frame.
Within 6 seconds, the RoboMop
will turn itself on automatically.
(See Figure F)
DISPOSAL OF PADS
Dispose soiled pads in the trash .
(See Figure H) Do not dispose
soiled pads in the toilet.
AUTOMATIC SHUT OFF
RoboMop will automatically shut
off when the program is complete,
based on the time you set it to. To
stop the RoboMop at any time,
simply press the Red OFF button.
When RoboMop is finished clean-
ing, remove it from the floor
to avoid tripping or falling over it.
(See Figure G)
6
step
Figure E
Figure F
Figure G
Figure H
54
SELECT CLEANING TIME
Press the Green ON/TIME button
located on your RoboMop under
the LCD screen on the left.
(See Figure E) The LCD display
screen will show the amount of
time the RoboMop will clean your
floor. To choose 1 hour and 30
minutes, press the ON/TIME but-
ton once. To choose 1 hour, press
the ON/TIME button twice. To
choose 30 minutes, press the
ON/TIME button three times.
Once you have chosen the time,
the ON/TIME button on the LCD
screen will flash 6X before turning
on automatically, allowing you
sufficient time to place the ball in
the Cleaning Frame.
1. CARGUE LA BOLA ROBÓTICA DE
3 A 5 HORAS (Consulte la figura A).
2. COLOQUE UNA MOPA ELECTROSTÁTICA
(Consulte la figura C).
3. COLOQUE EL MARCO DE LIMPIEZA EN EL
CENTRO DE LA HABITACIÓN (Consulte la figura D)
4. SELECCIONE EL TIEMPO DE LIMPIEZA (Consulte la figura E).
5. INSERTE LA BOLA ROBÓTICA EN EL MARCO
Transcurridos 6 segundos, RoboMop se encenderá
automáticamente. (Consulte la figura F).
ISTRUZIONI PER L’USO
4
step
5
step
7
step
STEP BY STEP GUIDE:
WARNINGS:
• Read all safety and operating instructions before operating RoboMop.
• Retain the safety and operating instructions for future reference.
• Always be careful when using your RoboMop. To reduce the risk
of injury or damage, keep these safety precautions in mind when
setting up, using and maintaining your equipment.
• RoboMop must not be used for any other purpose other than its
intended use.
• Store out of reach of children.
• Do not bend the Cleaning Frame.
• Charge the robotic ball only when it is completely discharged.
• This is an indoor device only.
• Do not use RoboMop on wet or damp surfaces or where immersion
in water is a possibility.
• Operate your RoboMop only from the type of power source indicated
in this manual. If you are not sure of the type of power supplied to
your home, consult your local power company.
• Plug the AC Battery Charger into a voltage tape AC OUTLET ONLY.
Product may not be used with any type of power converter.
Any such use will immediately void the Warranty.
• Use only the AC Battery Charger supplied by the manufacturer
to charge and recharge
this device.
• Charge indoors only.
• Never handle the AC Battery Charger with wet hands.
• Always remove AC Battery Charger from wall and disconnect
RoboMop after charging.
• RoboMop is not for use on carpets.
• RoboMop is designed to clean one room at a time. Confine
RoboMop to the room you want cleaned by closing all doors.
• Observe RoboMop the first time it cleans a room to confirm it does
not get wedged under or stuck on top of uneven surfaces.
• The Cleaning Frame should not be washed. Clean softly with a
duster or clean with a dry soft cloth.
• Use the specifically designed electrostatic pads on dry floors only.
• Protect the Cleaning Frame from bending, warping or folding.
• When RoboMop is finished cleaning, remove RoboMop from the floor
to avoid tripping over it.
INSERT THE ROBOTIC BALL
IN THE CLEANING FRAME
Place the RoboMop ball into the
center of the Cleaning Frame.
Within 6 seconds, the RoboMop
will turn itself on automatically.
(See Figure F)
DISPOSAL OF PADS
Dispose soiled pads in the trash .
(See Figure H) Do not dispose
soiled pads in the toilet.
AUTOMATIC SHUT OFF
RoboMop will automatically shut
off when the program is complete,
based on the time you set it to. To
stop the RoboMop at any time,
simply press the Red OFF button.
When RoboMop is finished clean-
ing, remove it from the floor
to avoid tripping or falling over it.
(See Figure G)
6
step
Figure E
Figure F
Figure G
Figure H
54
SELECT CLEANING TIME
Press the Green ON/TIME button
located on your RoboMop under
the LCD screen on the left.
(See Figure E) The LCD display
screen will show the amount of
time the RoboMop will clean your
floor. To choose 1 hour and 30
minutes, press the ON/TIME but-
ton once. To choose 1 hour, press
the ON/TIME button twice. To
choose 30 minutes, press the
ON/TIME button three times.
Once you have chosen the time,
the ON/TIME button on the LCD
screen will flash 6X before turning
on automatically, allowing you
sufficient time to place the ball in
the Cleaning Frame.
Figure E
CHARGE THE ROBOTIC
BALL FOR 3-5 HOURS
Before initial use, charge the ball.
Insert the plug of the AC Battery
Charger into the Charger Port
jack of the Robotic Ball.
(See Figure A) Plug the AC
Battery Charger into a voltage tape
AC Outlet ONLY. (See Figure B)
The ball will fully charge in about
3-5 hours. Recharge the unit only
when it is completely discharged.
ATTACH ONE
ELECTROST A TIC PAD
Attach one disposable electrostatic
pad to the underside of the
Cleaning Frame and secure by
pushing the pad down onto the
black velcro tabs on the
Cleaning Frame. (See Figure C)
STEP BY STEP GUIDE:
2
step
1
step
FOR OPTIMAL CLEANING PERFORMANCE:
HELPFUL ROOM CLEANING TIPS:
PLACE THE CLEANING
FRAME IN THE CENTER
OF THE ROOM
Clear the room. Place the
Cleaning Frame in the center of the
room. (See Figure D) For prepa-
ration hints for clearing the room,
see page 6 of this operator’s man-
ual for our “For Optimal Cleaning
Performance” tips.”
Figure A
Figure B
Figure C
Figure D
RoboMop may come
upon a piece of furniture
like this couch, which
RoboMop can get
wedged up against and
get stuck. If RoboMop
can’t get out, just pull it
out and set it back to work
again. Or you can put a
small object in front of it,
so RoboMop can’t get
stuck underneath.
RoboMop can get
trapped between or
behind your furniture
because the entrance to
an area is barely big
enough for RoboMop
to fit through. Placing a
chair or plant in front of
the piece of furniture,
can solve the trouble so
it won’t stop working.
RoboMop may bump
into small items that can
spill and make a mess.
To make sure RoboMop
can clean the whole
floor; pick up any small
objects, just as you do
before you vacuum.
AVOID GETTING STUCK
AVOID MESSY SPILLS DON’T GET TRAPPED
3
step
For optimal cleaning performance, clear your floor of objects just as you would
before using a regular vacuum cleaner. Do not leave the following items on the
floor: clothing, loose papers, pull cords for blinds or curtains, power cords, or any
fragile items. RoboMop contacts walls, furniture and other objects as it cleans, so
please remove any items that may be pushed and knocked over by light contact
from RoboMop. If your room does not have a door, or there is access to a stairway
where RoboMop can fall down the stairs, simply block off the area with either a
chair, plant, gate or other object.
www.robomop.net
velcro tab
3
6
CHARGE THE ROBOTIC
BALL FOR 3-5 HOURS
Before initial use, charge the ball.
Insert the plug of the AC Battery
Charger into the Charger Port
jack of the Robotic Ball.
(See Figure A) Plug the AC
Battery Charger into a voltage tape
AC Outlet ONLY. (See Figure B)
The ball will fully charge in about
3-5 hours. Recharge the unit only
when it is completely discharged.
ATTACH ONE
ELECTROST A TIC PAD
Attach one disposable electrostatic
pad to the underside of the
Cleaning Frame and secure by
pushing the pad down onto the
black velcro tabs on the
Cleaning Frame. (See Figure C)
STEP BY STEP GUIDE:
2
step
1
step
FOR OPTIMAL CLEANING PERFORMANCE:
HELPFUL ROOM CLEANING TIPS:
PLACE THE CLEANING
FRAME IN THE CENTER
OF THE ROOM
Clear the room. Place the
Cleaning Frame in the center of the
room. (See Figure D) For prepa-
ration hints for clearing the room,
see page 6 of this operator’s man-
ual for our “For Optimal Cleaning
Performance” tips.”
Figure A
Figure B
Figure C
Figure D
RoboMop may come
upon a piece of furniture
like this couch, which
RoboMop can get
wedged up against and
get stuck. If RoboMop
can’t get out, just pull it
out and set it back to work
again. Or you can put a
small object in front of it,
so RoboMop can’t get
stuck underneath.
RoboMop can get
trapped between or
behind your furniture
because the entrance to
an area is barely big
enough for RoboMop
to fit through. Placing a
chair or plant in front of
the piece of furniture,
can solve the trouble so
it won’t stop working.
RoboMop may bump
into small items that can
spill and make a mess.
To make sure RoboMop
can clean the whole
floor; pick up any small
objects, just as you do
before you vacuum.
AVOID GETTING STUCK
AVOID MESSY SPILLS DON’T GET TRAPPED
3
step
For optimal cleaning performance, clear your floor of objects just as you would
before using a regular vacuum cleaner. Do not leave the following items on the
floor: clothing, loose papers, pull cords for blinds or curtains, power cords, or any
fragile items. RoboMop contacts walls, furniture and other objects as it cleans, so
please remove any items that may be pushed and knocked over by light contact
from RoboMop. If your room does not have a door, or there is access to a stairway
where RoboMop can fall down the stairs, simply block off the area with either a
chair, plant, gate or other object.
www.robomop.net
velcro tab
3
6
CHARGE THE ROBOTIC
BALL FOR 3-5 HOURS
Before initial use, charge the ball.
Insert the plug of the AC Battery
Charger into the Charger Port
jack of the Robotic Ball.
(See Figure A) Plug the AC
Battery Charger into a voltage tape
AC Outlet ONLY. (See Figure B)
The ball will fully charge in about
3-5 hours. Recharge the unit only
when it is completely discharged.
ATTACH ONE
ELECTROST A TIC PAD
Attach one disposable electrostatic
pad to the underside of the
Cleaning Frame and secure by
pushing the pad down onto the
black velcro tabs on the
Cleaning Frame. (See Figure C)
STEP BY STEP GUIDE:
2
step
1
step
FOR OPTIMAL CLEANING PERFORMANCE:
HELPFUL ROOM CLEANING TIPS:
PLACE THE CLEANING
FRAME IN THE CENTER
OF THE ROOM
Clear the room. Place the
Cleaning Frame in the center of the
room. (See Figure D) For prepa-
ration hints for clearing the room,
see page 6 of this operator’s man-
ual for our “For Optimal Cleaning
Performance” tips.”
Figure A
Figure B
Figure C
Figure D
RoboMop may come
upon a piece of furniture
like this couch, which
RoboMop can get
wedged up against and
get stuck. If RoboMop
can’t get out, just pull it
out and set it back to work
again. Or you can put a
small object in front of it,
so RoboMop can’t get
stuck underneath.
RoboMop can get
trapped between or
behind your furniture
because the entrance to
an area is barely big
enough for RoboMop
to fit through. Placing a
chair or plant in front of
the piece of furniture,
can solve the trouble so
it won’t stop working.
RoboMop may bump
into small items that can
spill and make a mess.
To make sure RoboMop
can clean the whole
floor; pick up any small
objects, just as you do
before you vacuum.
AVOID GETTING STUCK
AVOID MESSY SPILLS DON’T GET TRAPPED
3
step
For optimal cleaning performance, clear your floor of objects just as you would
before using a regular vacuum cleaner. Do not leave the following items on the
floor: clothing, loose papers, pull cords for blinds or curtains, power cords, or any
fragile items. RoboMop contacts walls, furniture and other objects as it cleans, so
please remove any items that may be pushed and knocked over by light contact
from RoboMop. If your room does not have a door, or there is access to a stairway
where RoboMop can fall down the stairs, simply block off the area with either a
chair, plant, gate or other object.
www.robomop.net
velcro tab
3
6
CHARGE THE ROBOTIC
BALL FOR 3-5 HOURS
Before initial use, charge the ball.
Insert the plug of the AC Battery
Charger into the Charger Port
jack of the Robotic Ball.
(See Figure A) Plug the AC
Battery Charger into a voltage tape
AC Outlet ONLY. (See Figure B)
The ball will fully charge in about
3-5 hours. Recharge the unit only
when it is completely discharged.
ATTACH ONE
ELECTROST A TIC PAD
Attach one disposable electrostatic
pad to the underside of the
Cleaning Frame and secure by
pushing the pad down onto the
black velcro tabs on the
Cleaning Frame. (See Figure C)
STEP BY STEP GUIDE:
2
step
1
step
FOR OPTIMAL CLEANING PERFORMANCE:
HELPFUL ROOM CLEANING TIPS:
PLACE THE CLEANING
FRAME IN THE CENTER
OF THE ROOM
Clear the room. Place the
Cleaning Frame in the center of the
room. (See Figure D) For prepa-
ration hints for clearing the room,
see page 6 of this operator’s man-
ual for our “For Optimal Cleaning
Performance” tips.”
Figure A
Figure B
Figure C
Figure D
RoboMop may come
upon a piece of furniture
like this couch, which
RoboMop can get
wedged up against and
get stuck. If RoboMop
can’t get out, just pull it
out and set it back to work
again. Or you can put a
small object in front of it,
so RoboMop can’t get
stuck underneath.
RoboMop can get
trapped between or
behind your furniture
because the entrance to
an area is barely big
enough for RoboMop
to fit through. Placing a
chair or plant in front of
the piece of furniture,
can solve the trouble so
it won’t stop working.
RoboMop may bump
into small items that can
spill and make a mess.
To make sure RoboMop
can clean the whole
floor; pick up any small
objects, just as you do
before you vacuum.
AVOID GETTING STUCK
AVOID MESSY SPILLS DON’T GET TRAPPED
3
step
For optimal cleaning performance, clear your floor of objects just as you would
before using a regular vacuum cleaner. Do not leave the following items on the
floor: clothing, loose papers, pull cords for blinds or curtains, power cords, or any
fragile items. RoboMop contacts walls, furniture and other objects as it cleans, so
please remove any items that may be pushed and knocked over by light contact
from RoboMop. If your room does not have a door, or there is access to a stairway
where RoboMop can fall down the stairs, simply block off the area with either a
chair, plant, gate or other object.
www.robomop.net
velcro tab
3
6
CHARGE THE ROBOTIC
BALL FOR 3-5 HOURS
Before initial use, charge the ball.
Insert the plug of the AC Battery
Charger into the Charger Port
jack of the Robotic Ball.
(See Figure A) Plug the AC
Battery Charger into a voltage tape
AC Outlet ONLY. (See Figure B)
The ball will fully charge in about
3-5 hours. Recharge the unit only
when it is completely discharged.
ATTACH ONE
ELECTROST A TIC PAD
Attach one disposable electrostatic
pad to the underside of the
Cleaning Frame and secure by
pushing the pad down onto the
black velcro tabs on the
Cleaning Frame. (See Figure C)
STEP BY STEP GUIDE:
2
step
1
step
FOR OPTIMAL CLEANING PERFORMANCE:
HELPFUL ROOM CLEANING TIPS:
PLACE THE CLEANING
FRAME IN THE CENTER
OF THE ROOM
Clear the room. Place the
Cleaning Frame in the center of the
room. (See Figure D) For prepa-
ration hints for clearing the room,
see page 6 of this operator’s man-
ual for our “For Optimal Cleaning
Performance” tips.”
Figure A
Figure B
Figure C
Figure D
RoboMop may come
upon a piece of furniture
like this couch, which
RoboMop can get
wedged up against and
get stuck. If RoboMop
can’t get out, just pull it
out and set it back to work
again. Or you can put a
small object in front of it,
so RoboMop can’t get
stuck underneath.
RoboMop can get
trapped between or
behind your furniture
because the entrance to
an area is barely big
enough for RoboMop
to fit through. Placing a
chair or plant in front of
the piece of furniture,
can solve the trouble so
it won’t stop working.
RoboMop may bump
into small items that can
spill and make a mess.
To make sure RoboMop
can clean the whole
floor; pick up any small
objects, just as you do
before you vacuum.
AVOID GETTING STUCK
AVOID MESSY SPILLS DON’T GET TRAPPED
3
step
For optimal cleaning performance, clear your floor of objects just as you would
before using a regular vacuum cleaner. Do not leave the following items on the
floor: clothing, loose papers, pull cords for blinds or curtains, power cords, or any
fragile items. RoboMop contacts walls, furniture and other objects as it cleans, so
please remove any items that may be pushed and knocked over by light contact
from RoboMop. If your room does not have a door, or there is access to a stairway
where RoboMop can fall down the stairs, simply block off the area with either a
chair, plant, gate or other object.
www.robomop.net
velcro tab
3
6
4
step
5
step
7
step
STEP BY STEP GUIDE:
WARNINGS:
• Read all safety and operating instructions before operating RoboMop.
• Retain the safety and operating instructions for future reference.
• Always be careful when using your RoboMop. To reduce the risk
of injury or damage, keep these safety precautions in mind when
setting up, using and maintaining your equipment.
• RoboMop must not be used for any other purpose other than its
intended use.
• Store out of reach of children.
• Do not bend the Cleaning Frame.
• Charge the robotic ball only when it is completely discharged.
• This is an indoor device only.
• Do not use RoboMop on wet or damp surfaces or where immersion
in water is a possibility.
• Operate your RoboMop only from the type of power source indicated
in this manual. If you are not sure of the type of power supplied to
your home, consult your local power company.
• Plug the AC Battery Charger into a voltage tape AC OUTLET ONLY.
Product may not be used with any type of power converter.
Any such use will immediately void the Warranty.
• Use only the AC Battery Charger supplied by the manufacturer
to charge and recharge
this device.
• Charge indoors only.
• Never handle the AC Battery Charger with wet hands.
• Always remove AC Battery Charger from wall and disconnect
RoboMop after charging.
• RoboMop is not for use on carpets.
• RoboMop is designed to clean one room at a time. Confine
RoboMop to the room you want cleaned by closing all doors.
• Observe RoboMop the first time it cleans a room to confirm it does
not get wedged under or stuck on top of uneven surfaces.
• The Cleaning Frame should not be washed. Clean softly with a
duster or clean with a dry soft cloth.
• Use the specifically designed electrostatic pads on dry floors only.
• Protect the Cleaning Frame from bending, warping or folding.
• When RoboMop is finished cleaning, remove RoboMop from the floor
to avoid tripping over it.
INSERT THE ROBOTIC BALL
IN THE CLEANING FRAME
Place the RoboMop ball into the
center of the Cleaning Frame.
Within 6 seconds, the RoboMop
will turn itself on automatically.
(See Figure F)
DISPOSAL OF PADS
Dispose soiled pads in the trash .
(See Figure H) Do not dispose
soiled pads in the toilet.
AUTOMATIC SHUT OFF
RoboMop will automatically shut
off when the program is complete,
based on the time you set it to. To
stop the RoboMop at any time,
simply press the Red OFF button.
When RoboMop is finished clean-
ing, remove it from the floor
to avoid tripping or falling over it.
(See Figure G)
6
step
Figure E
Figure F
Figure G
Figure H
54
SELECT CLEANING TIME
Press the Green ON/TIME button
located on your RoboMop under
the LCD screen on the left.
(See Figure E) The LCD display
screen will show the amount of
time the RoboMop will clean your
floor. To choose 1 hour and 30
minutes, press the ON/TIME but-
ton once. To choose 1 hour, press
the ON/TIME button twice. To
choose 30 minutes, press the
ON/TIME button three times.
Once you have chosen the time,
the ON/TIME button on the LCD
screen will flash 6X before turning
on automatically, allowing you
sufficient time to place the ball in
the Cleaning Frame.
4
step
5
step
7
step
STEP BY STEP GUIDE:
WARNINGS:
• Read all safety and operating instructions before operating RoboMop.
• Retain the safety and operating instructions for future reference.
• Always be careful when using your RoboMop. To reduce the risk
of injury or damage, keep these safety precautions in mind when
setting up, using and maintaining your equipment.
• RoboMop must not be used for any other purpose other than its
intended use.
• Store out of reach of children.
• Do not bend the Cleaning Frame.
• Charge the robotic ball only when it is completely discharged.
• This is an indoor device only.
• Do not use RoboMop on wet or damp surfaces or where immersion
in water is a possibility.
• Operate your RoboMop only from the type of power source indicated
in this manual. If you are not sure of the type of power supplied to
your home, consult your local power company.
• Plug the AC Battery Charger into a voltage tape AC OUTLET ONLY.
Product may not be used with any type of power converter.
Any such use will immediately void the Warranty.
• Use only the AC Battery Charger supplied by the manufacturer
to charge and recharge
this device.
• Charge indoors only.
• Never handle the AC Battery Charger with wet hands.
• Always remove AC Battery Charger from wall and disconnect
RoboMop after charging.
• RoboMop is not for use on carpets.
• RoboMop is designed to clean one room at a time. Confine
RoboMop to the room you want cleaned by closing all doors.
• Observe RoboMop the first time it cleans a room to confirm it does
not get wedged under or stuck on top of uneven surfaces.
• The Cleaning Frame should not be washed. Clean softly with a
duster or clean with a dry soft cloth.
• Use the specifically designed electrostatic pads on dry floors only.
• Protect the Cleaning Frame from bending, warping or folding.
• When RoboMop is finished cleaning, remove RoboMop from the floor
to avoid tripping over it.
INSERT THE ROBOTIC BALL
IN THE CLEANING FRAME
Place the RoboMop ball into the
center of the Cleaning Frame.
Within 6 seconds, the RoboMop
will turn itself on automatically.
(See Figure F)
DISPOSAL OF PADS
Dispose soiled pads in the trash .
(See Figure H) Do not dispose
soiled pads in the toilet.
AUTOMATIC SHUT OFF
RoboMop will automatically shut
off when the program is complete,
based on the time you set it to. To
stop the RoboMop at any time,
simply press the Red OFF button.
When RoboMop is finished clean-
ing, remove it from the floor
to avoid tripping or falling over it.
(See Figure G)
6
step
Figure E
Figure F
Figure G
Figure H
54
SELECT CLEANING TIME
Press the Green ON/TIME button
located on your RoboMop under
the LCD screen on the left.
(See Figure E) The LCD display
screen will show the amount of
time the RoboMop will clean your
floor. To choose 1 hour and 30
minutes, press the ON/TIME but-
ton once. To choose 1 hour, press
the ON/TIME button twice. To
choose 30 minutes, press the
ON/TIME button three times.
Once you have chosen the time,
the ON/TIME button on the LCD
screen will flash 6X before turning
on automatically, allowing you
sufficient time to place the ball in
the Cleaning Frame.
4
step
5
step
7
step
STEP BY STEP GUIDE:
WARNINGS:
• Read all safety and operating instructions before operating RoboMop.
• Retain the safety and operating instructions for future reference.
• Always be careful when using your RoboMop. To reduce the risk
of injury or damage, keep these safety precautions in mind when
setting up, using and maintaining your equipment.
• RoboMop must not be used for any other purpose other than its
intended use.
• Store out of reach of children.
• Do not bend the Cleaning Frame.
• Charge the robotic ball only when it is completely discharged.
• This is an indoor device only.
• Do not use RoboMop on wet or damp surfaces or where immersion
in water is a possibility.
• Operate your RoboMop only from the type of power source indicated
in this manual. If you are not sure of the type of power supplied to
your home, consult your local power company.
• Plug the AC Battery Charger into a voltage tape AC OUTLET ONLY.
Product may not be used with any type of power converter.
Any such use will immediately void the Warranty.
• Use only the AC Battery Charger supplied by the manufacturer
to charge and recharge
this device.
• Charge indoors only.
• Never handle the AC Battery Charger with wet hands.
• Always remove AC Battery Charger from wall and disconnect
RoboMop after charging.
• RoboMop is not for use on carpets.
• RoboMop is designed to clean one room at a time. Confine
RoboMop to the room you want cleaned by closing all doors.
• Observe RoboMop the first time it cleans a room to confirm it does
not get wedged under or stuck on top of uneven surfaces.
• The Cleaning Frame should not be washed. Clean softly with a
duster or clean with a dry soft cloth.
• Use the specifically designed electrostatic pads on dry floors only.
• Protect the Cleaning Frame from bending, warping or folding.
• When RoboMop is finished cleaning, remove RoboMop from the floor
to avoid tripping over it.
INSERT THE ROBOTIC BALL
IN THE CLEANING FRAME
Place the RoboMop ball into the
center of the Cleaning Frame.
Within 6 seconds, the RoboMop
will turn itself on automatically.
(See Figure F)
DISPOSAL OF PADS
Dispose soiled pads in the trash .
(See Figure H) Do not dispose
soiled pads in the toilet.
AUTOMATIC SHUT OFF
RoboMop will automatically shut
off when the program is complete,
based on the time you set it to. To
stop the RoboMop at any time,
simply press the Red OFF button.
When RoboMop is finished clean-
ing, remove it from the floor
to avoid tripping or falling over it.
(See Figure G)
6
step
Figure E
Figure F
Figure G
Figure H
54
SELECT CLEANING TIME
Press the Green ON/TIME button
located on your RoboMop under
the LCD screen on the left.
(See Figure E) The LCD display
screen will show the amount of
time the RoboMop will clean your
floor. To choose 1 hour and 30
minutes, press the ON/TIME but-
ton once. To choose 1 hour, press
the ON/TIME button twice. To
choose 30 minutes, press the
ON/TIME button three times.
Once you have chosen the time,
the ON/TIME button on the LCD
screen will flash 6X before turning
on automatically, allowing you
sufficient time to place the ball in
the Cleaning Frame.
4
step
5
step
7
step
STEP BY STEP GUIDE:
WARNINGS:
• Read all safety and operating instructions before operating RoboMop.
• Retain the safety and operating instructions for future reference.
• Always be careful when using your RoboMop. To reduce the risk
of injury or damage, keep these safety precautions in mind when
setting up, using and maintaining your equipment.
• RoboMop must not be used for any other purpose other than its
intended use.
• Store out of reach of children.
• Do not bend the Cleaning Frame.
• Charge the robotic ball only when it is completely discharged.
• This is an indoor device only.
• Do not use RoboMop on wet or damp surfaces or where immersion
in water is a possibility.
• Operate your RoboMop only from the type of power source indicated
in this manual. If you are not sure of the type of power supplied to
your home, consult your local power company.
• Plug the AC Battery Charger into a voltage tape AC OUTLET ONLY.
Product may not be used with any type of power converter.
Any such use will immediately void the Warranty.
• Use only the AC Battery Charger supplied by the manufacturer
to charge and recharge
this device.
• Charge indoors only.
• Never handle the AC Battery Charger with wet hands.
• Always remove AC Battery Charger from wall and disconnect
RoboMop after charging.
• RoboMop is not for use on carpets.
• RoboMop is designed to clean one room at a time. Confine
RoboMop to the room you want cleaned by closing all doors.
• Observe RoboMop the first time it cleans a room to confirm it does
not get wedged under or stuck on top of uneven surfaces.
• The Cleaning Frame should not be washed. Clean softly with a
duster or clean with a dry soft cloth.
• Use the specifically designed electrostatic pads on dry floors only.
• Protect the Cleaning Frame from bending, warping or folding.
• When RoboMop is finished cleaning, remove RoboMop from the floor
to avoid tripping over it.
INSERT THE ROBOTIC BALL
IN THE CLEANING FRAME
Place the RoboMop ball into the
center of the Cleaning Frame.
Within 6 seconds, the RoboMop
will turn itself on automatically.
(See Figure F)
DISPOSAL OF PADS
Dispose soiled pads in the trash .
(See Figure H) Do not dispose
soiled pads in the toilet.
AUTOMATIC SHUT OFF
RoboMop will automatically shut
off when the program is complete,
based on the time you set it to. To
stop the RoboMop at any time,
simply press the Red OFF button.
When RoboMop is finished clean-
ing, remove it from the floor
to avoid tripping or falling over it.
(See Figure G)
6
step
Figure E
Figure F
Figure G
Figure H
54
SELECT CLEANING TIME
Press the Green ON/TIME button
located on your RoboMop under
the LCD screen on the left.
(See Figure E) The LCD display
screen will show the amount of
time the RoboMop will clean your
floor. To choose 1 hour and 30
minutes, press the ON/TIME but-
ton once. To choose 1 hour, press
the ON/TIME button twice. To
choose 30 minutes, press the
ON/TIME button three times.
Once you have chosen the time,
the ON/TIME button on the LCD
screen will flash 6X before turning
on automatically, allowing you
sufficient time to place the ball in
the Cleaning Frame.
Figure E
Figure G
CHARGE THE ROBOTIC
BALL FOR 3-5 HOURS
Before initial use, charge the ball.
Insert the plug of the AC Battery
Charger into the Charger Port
jack of the Robotic Ball.
(See Figure A) Plug the AC
Battery Charger into a voltage tape
AC Outlet ONLY. (See Figure B)
The ball will fully charge in about
3-5 hours. Recharge the unit only
when it is completely discharged.
ATTACH ONE
ELECTROST A TIC PAD
Attach one disposable electrostatic
pad to the underside of the
Cleaning Frame and secure by
pushing the pad down onto the
black velcro tabs on the
Cleaning Frame. (See Figure C)
STEP BY STEP GUIDE:
2
step
1
step
FOR OPTIMAL CLEANING PERFORMANCE:
HELPFUL ROOM CLEANING TIPS:
PLACE THE CLEANING
FRAME IN THE CENTER
OF THE ROOM
Clear the room. Place the
Cleaning Frame in the center of the
room. (See Figure D) For prepa-
ration hints for clearing the room,
see page 6 of this operator’s man-
ual for our “For Optimal Cleaning
Performance” tips.”
Figure A
Figure B
Figure C
Figure D
RoboMop may come
upon a piece of furniture
like this couch, which
RoboMop can get
wedged up against and
get stuck. If RoboMop
can’t get out, just pull it
out and set it back to work
again. Or you can put a
small object in front of it,
so RoboMop can’t get
stuck underneath.
RoboMop can get
trapped between or
behind your furniture
because the entrance to
an area is barely big
enough for RoboMop
to fit through. Placing a
chair or plant in front of
the piece of furniture,
can solve the trouble so
it won’t stop working.
RoboMop may bump
into small items that can
spill and make a mess.
To make sure RoboMop
can clean the whole
floor; pick up any small
objects, just as you do
before you vacuum.
AVOID GETTING STUCK
AVOID MESSY SPILLS DON’T GET TRAPPED
3
step
For optimal cleaning performance, clear your floor of objects just as you would
before using a regular vacuum cleaner. Do not leave the following items on the
floor: clothing, loose papers, pull cords for blinds or curtains, power cords, or any
fragile items. RoboMop contacts walls, furniture and other objects as it cleans, so
please remove any items that may be pushed and knocked over by light contact
from RoboMop. If your room does not have a door, or there is access to a stairway
where RoboMop can fall down the stairs, simply block off the area with either a
chair, plant, gate or other object.
www.robomop.net
velcro tab
3
6
OPERATOR’S MANUAL
FREQUENTLY ASKED QUESTIONS:
THIS SET INCLUDES THE FOLLOWING PARTS:
1 Cleaning Frame and 1 Robotic Ball
NOTE:
Read all safety and operating
instructions before operating
your new RoboMop.
1AC Battery Charger
8 Electrostatic Disposable Cloths
2
7
Q. My RoboMop gets stuck. What should I do?
A. Your RoboMop may occasionally get stuck, especially in rooms that
it has not cleaned before. If it does get stuck, RoboMop will try to free
itself by turning in different directions. If it cannot free itself, move or
block any object that RoboMop gets stuck on or under. Once the
problem areas have been amended, pick up your RoboMop and
reposition. Your RoboMop might get stuck for several reasons.
1. It is wedged or pinned between or under narrowly spaced objects.
2. RoboMop bumps into objects and repositions them in such a way
that an exit path no longer exists.
Q. My RoboMop Cleaning Frame has broken. What shall I do?
A. Please contact the local distributor through www.robomop.net.
Q. Are pets and children safe around RoboMop?
A. Children and pets should always be supervised around RoboMop for
optimal safety and cleaning performance.
Q. Does RoboMop clean corners and along the walls?
A. RoboMop cleans next to walls, most corners and other tough to
reach places.
Q. Will it go under kickboards, beds, and furniture?
A. RoboMop has been designed to fit under the kickboards in your
kitchen. If your bed or
furniture is more than 8 cm off the floor, your
RoboMop will happily clean underneath.
Q. How long does it take to recharge the RoboMop?
A. Approximately 3-5 hours.
Q: Will RoboMop clean all floor surfaces?
A: RoboMop cleans hardwood, linoleum, tile, ceramic tile, marble,
granite and other hard floor surfaces.
5
RoboMop is designed to sweep the floors for you so you will have extra time to take care of
more important things or just sit back and relax. Simply attach an electrostatic and dust
absorbing pad, set the cleaning time on the robotic ball, place it in the cleaning frame and
watch RoboMop automatically sweep your floors. Using smart sensor technology, RoboMop
navigates smoothly and silently, cleaning dirty edges under the kitchen counter, in corners,
around walls and under furniture. The flexible edges will not damage furniture. It is great for
all your hard floor surfaces like wood floors, ceramic tile, granite, marble, and linoleum.
The VoltaWebTM dustpads are especially designed to attract and retain as much dust as
possible during the cleaning session. The dust attraction is obtained through the unique
composition of fibres in the cloth that generates static electricity though friction between the
pad and the floor surface. The pad itself is designed with microscopic dust pockets that
absorb and transpor t the dust into the centre of the textile. In this way it is possible for the
textile to attract even more dirt. When the pad is soiled, just remove it and toss it in the
trash.
Enjoy your RoboMop!
CHARGE THE ROBOTIC
BALL FOR 3-5 HOURS
Before initial use, charge the ball.
Insert the plug of the AC Battery
Charger into the Charger Port
jack of the Robotic Ball.
(See Figure A) Plug the AC
Battery Charger into a voltage tape
AC Outlet ONLY. (See Figure B)
The ball will fully charge in about
3-5 hours. Recharge the unit only
when it is completely discharged.
ATTACH ONE
ELECTROST A TIC PAD
Attach one disposable electrostatic
pad to the underside of the
Cleaning Frame and secure by
pushing the pad down onto the
black velcro tabs on the
Cleaning Frame. (See Figure C)
STEP BY STEP GUIDE:
2
step
1
step
FOR OPTIMAL CLEANING PERFORMANCE:
HELPFUL ROOM CLEANING TIPS:
PLACE THE CLEANING
FRAME IN THE CENTER
OF THE ROOM
Clear the room. Place the
Cleaning Frame in the center of the
room. (See Figure D) For prepa-
ration hints for clearing the room,
see page 6 of this operator’s man-
ual for our “For Optimal Cleaning
Performance” tips.”
Figure A
Figure B
Figure C
Figure D
RoboMop may come
upon a piece of furniture
like this couch, which
RoboMop can get
wedged up against and
get stuck. If RoboMop
can’t get out, just pull it
out and set it back to work
again. Or you can put a
small object in front of it,
so RoboMop can’t get
stuck underneath.
RoboMop can get
trapped between or
behind your furniture
because the entrance to
an area is barely big
enough for RoboMop
to fit through. Placing a
chair or plant in front of
the piece of furniture,
can solve the trouble so
it won’t stop working.
RoboMop may bump
into small items that can
spill and make a mess.
To make sure RoboMop
can clean the whole
floor; pick up any small
objects, just as you do
before you vacuum.
AVOID GETTING STUCK
AVOID MESSY SPILLS DON’T GET TRAPPED
3
step
For optimal cleaning performance, clear your floor of objects just as you would
before using a regular vacuum cleaner. Do not leave the following items on the
floor: clothing, loose papers, pull cords for blinds or curtains, power cords, or any
fragile items. RoboMop contacts walls, furniture and other objects as it cleans, so
please remove any items that may be pushed and knocked over by light contact
from RoboMop. If your room does not have a door, or there is access to a stairway
where RoboMop can fall down the stairs, simply block off the area with either a
chair, plant, gate or other object.
www.robomop.net
velcro tab
3
6
CHARGE THE ROBOTIC
BALL FOR 3-5 HOURS
Before initial use, charge the ball.
Insert the plug of the AC Battery
Charger into the Charger Port
jack of the Robotic Ball.
(See Figure A) Plug the AC
Battery Charger into a voltage tape
AC Outlet ONLY. (See Figure B)
The ball will fully charge in about
3-5 hours. Recharge the unit only
when it is completely discharged.
ATTACH ONE
ELECTROST A TIC PAD
Attach one disposable electrostatic
pad to the underside of the
Cleaning Frame and secure by
pushing the pad down onto the
black velcro tabs on the
Cleaning Frame. (See Figure C)
STEP BY STEP GUIDE:
2
step
1
step
FOR OPTIMAL CLEANING PERFORMANCE:
HELPFUL ROOM CLEANING TIPS:
PLACE THE CLEANING
FRAME IN THE CENTER
OF THE ROOM
Clear the room. Place the
Cleaning Frame in the center of the
room. (See Figure D) For prepa-
ration hints for clearing the room,
see page 6 of this operator’s man-
ual for our “For Optimal Cleaning
Performance” tips.”
Figure A
Figure B
Figure C
Figure D
RoboMop may come
upon a piece of furniture
like this couch, which
RoboMop can get
wedged up against and
get stuck. If RoboMop
can’t get out, just pull it
out and set it back to work
again. Or you can put a
small object in front of it,
so RoboMop can’t get
stuck underneath.
RoboMop can get
trapped between or
behind your furniture
because the entrance to
an area is barely big
enough for RoboMop
to fit through. Placing a
chair or plant in front of
the piece of furniture,
can solve the trouble so
it won’t stop working.
RoboMop may bump
into small items that can
spill and make a mess.
To make sure RoboMop
can clean the whole
floor; pick up any small
objects, just as you do
before you vacuum.
AVOID GETTING STUCK
AVOID MESSY SPILLS DON’T GET TRAPPED
3
step
For optimal cleaning performance, clear your floor of objects just as you would
before using a regular vacuum cleaner. Do not leave the following items on the
floor: clothing, loose papers, pull cords for blinds or curtains, power cords, or any
fragile items. RoboMop contacts walls, furniture and other objects as it cleans, so
please remove any items that may be pushed and knocked over by light contact
from RoboMop. If your room does not have a door, or there is access to a stairway
where RoboMop can fall down the stairs, simply block off the area with either a
chair, plant, gate or other object.
www.robomop.net
velcro tab
3
6
CHARGE THE ROBOTIC
BALL FOR 3-5 HOURS
Before initial use, charge the ball.
Insert the plug of the AC Battery
Charger into the Charger Port
jack of the Robotic Ball.
(See Figure A) Plug the AC
Battery Charger into a voltage tape
AC Outlet ONLY. (See Figure B)
The ball will fully charge in about
3-5 hours. Recharge the unit only
when it is completely discharged.
ATTACH ONE
ELECTROST A TIC PAD
Attach one disposable electrostatic
pad to the underside of the
Cleaning Frame and secure by
pushing the pad down onto the
black velcro tabs on the
Cleaning Frame. (See Figure C)
STEP BY STEP GUIDE:
2
step
1
step
FOR OPTIMAL CLEANING PERFORMANCE:
HELPFUL ROOM CLEANING TIPS:
PLACE THE CLEANING
FRAME IN THE CENTER
OF THE ROOM
Clear the room. Place the
Cleaning Frame in the center of the
room. (See Figure D) For prepa-
ration hints for clearing the room,
see page 6 of this operator’s man-
ual for our “For Optimal Cleaning
Performance” tips.”
Figure A
Figure B
Figure C
Figure D
RoboMop may come
upon a piece of furniture
like this couch, which
RoboMop can get
wedged up against and
get stuck. If RoboMop
can’t get out, just pull it
out and set it back to work
again. Or you can put a
small object in front of it,
so RoboMop can’t get
stuck underneath.
RoboMop can get
trapped between or
behind your furniture
because the entrance to
an area is barely big
enough for RoboMop
to fit through. Placing a
chair or plant in front of
the piece of furniture,
can solve the trouble so
it won’t stop working.
RoboMop may bump
into small items that can
spill and make a mess.
To make sure RoboMop
can clean the whole
floor; pick up any small
objects, just as you do
before you vacuum.
AVOID GETTING STUCK
AVOID MESSY SPILLS DON’T GET TRAPPED
3
step
For optimal cleaning performance, clear your floor of objects just as you would
before using a regular vacuum cleaner. Do not leave the following items on the
floor: clothing, loose papers, pull cords for blinds or curtains, power cords, or any
fragile items. RoboMop contacts walls, furniture and other objects as it cleans, so
please remove any items that may be pushed and knocked over by light contact
from RoboMop. If your room does not have a door, or there is access to a stairway
where RoboMop can fall down the stairs, simply block off the area with either a
chair, plant, gate or other object.
www.robomop.net
velcro tab
3
6
4
step
5
step
7
step
STEP BY STEP GUIDE:
WARNINGS:
• Read all safety and operating instructions before operating RoboMop.
• Retain the safety and operating instructions for future reference.
• Always be careful when using your RoboMop. To reduce the risk
of injury or damage, keep these safety precautions in mind when
setting up, using and maintaining your equipment.
• RoboMop must not be used for any other purpose other than its
intended use.
• Store out of reach of children.
• Do not bend the Cleaning Frame.
• Charge the robotic ball only when it is completely discharged.
• This is an indoor device only.
• Do not use RoboMop on wet or damp surfaces or where immersion
in water is a possibility.
• Operate your RoboMop only from the type of power source indicated
in this manual. If you are not sure of the type of power supplied to
your home, consult your local power company.
• Plug the AC Battery Charger into a voltage tape AC OUTLET ONLY.
Product may not be used with any type of power converter.
Any such use will immediately void the Warranty.
• Use only the AC Battery Charger supplied by the manufacturer
to charge and recharge
this device.
• Charge indoors only.
• Never handle the AC Battery Charger with wet hands.
• Always remove AC Battery Charger from wall and disconnect
RoboMop after charging.
• RoboMop is not for use on carpets.
• RoboMop is designed to clean one room at a time. Confine
RoboMop to the room you want cleaned by closing all doors.
• Observe RoboMop the first time it cleans a room to confirm it does
not get wedged under or stuck on top of uneven surfaces.
• The Cleaning Frame should not be washed. Clean softly with a
duster or clean with a dry soft cloth.
• Use the specifically designed electrostatic pads on dry floors only.
• Protect the Cleaning Frame from bending, warping or folding.
• When RoboMop is finished cleaning, remove RoboMop from the floor
to avoid tripping over it.
INSERT THE ROBOTIC BALL
IN THE CLEANING FRAME
Place the RoboMop ball into the
center of the Cleaning Frame.
Within 6 seconds, the RoboMop
will turn itself on automatically.
(See Figure F)
DISPOSAL OF PADS
Dispose soiled pads in the trash .
(See Figure H) Do not dispose
soiled pads in the toilet.
AUTOMATIC SHUT OFF
RoboMop will automatically shut
off when the program is complete,
based on the time you set it to. To
stop the RoboMop at any time,
simply press the Red OFF button.
When RoboMop is finished clean-
ing, remove it from the floor
to avoid tripping or falling over it.
(See Figure G)
6
step
Figure E
Figure F
Figure G
Figure H
54
SELECT CLEANING TIME
Press the Green ON/TIME button
located on your RoboMop under
the LCD screen on the left.
(See Figure E) The LCD display
screen will show the amount of
time the RoboMop will clean your
floor. To choose 1 hour and 30
minutes, press the ON/TIME but-
ton once. To choose 1 hour, press
the ON/TIME button twice. To
choose 30 minutes, press the
ON/TIME button three times.
Once you have chosen the time,
the ON/TIME button on the LCD
screen will flash 6X before turning
on automatically, allowing you
sufficient time to place the ball in
the Cleaning Frame.
4
step
5
step
7
step
STEP BY STEP GUIDE:
WARNINGS:
• Read all safety and operating instructions before operating RoboMop.
• Retain the safety and operating instructions for future reference.
• Always be careful when using your RoboMop. To reduce the risk
of injury or damage, keep these safety precautions in mind when
setting up, using and maintaining your equipment.
• RoboMop must not be used for any other purpose other than its
intended use.
• Store out of reach of children.
• Do not bend the Cleaning Frame.
• Charge the robotic ball only when it is completely discharged.
• This is an indoor device only.
• Do not use RoboMop on wet or damp surfaces or where immersion
in water is a possibility.
• Operate your RoboMop only from the type of power source indicated
in this manual. If you are not sure of the type of power supplied to
your home, consult your local power company.
• Plug the AC Battery Charger into a voltage tape AC OUTLET ONLY.
Product may not be used with any type of power converter.
Any such use will immediately void the Warranty.
• Use only the AC Battery Charger supplied by the manufacturer
to charge and recharge
this device.
• Charge indoors only.
• Never handle the AC Battery Charger with wet hands.
• Always remove AC Battery Charger from wall and disconnect
RoboMop after charging.
• RoboMop is not for use on carpets.
• RoboMop is designed to clean one room at a time. Confine
RoboMop to the room you want cleaned by closing all doors.
• Observe RoboMop the first time it cleans a room to confirm it does
not get wedged under or stuck on top of uneven surfaces.
• The Cleaning Frame should not be washed. Clean softly with a
duster or clean with a dry soft cloth.
• Use the specifically designed electrostatic pads on dry floors only.
• Protect the Cleaning Frame from bending, warping or folding.
• When RoboMop is finished cleaning, remove RoboMop from the floor
to avoid tripping over it.
INSERT THE ROBOTIC BALL
IN THE CLEANING FRAME
Place the RoboMop ball into the
center of the Cleaning Frame.
Within 6 seconds, the RoboMop
will turn itself on automatically.
(See Figure F)
DISPOSAL OF PADS
Dispose soiled pads in the trash .
(See Figure H) Do not dispose
soiled pads in the toilet.
AUTOMATIC SHUT OFF
RoboMop will automatically shut
off when the program is complete,
based on the time you set it to. To
stop the RoboMop at any time,
simply press the Red OFF button.
When RoboMop is finished clean-
ing, remove it from the floor
to avoid tripping or falling over it.
(See Figure G)
6
step
Figure E
Figure F
Figure G
Figure H
54
SELECT CLEANING TIME
Press the Green ON/TIME button
located on your RoboMop under
the LCD screen on the left.
(See Figure E) The LCD display
screen will show the amount of
time the RoboMop will clean your
floor. To choose 1 hour and 30
minutes, press the ON/TIME but-
ton once. To choose 1 hour, press
the ON/TIME button twice. To
choose 30 minutes, press the
ON/TIME button three times.
Once you have chosen the time,
the ON/TIME button on the LCD
screen will flash 6X before turning
on automatically, allowing you
sufficient time to place the ball in
the Cleaning Frame.
4
step
5
step
7
step
STEP BY STEP GUIDE:
WARNINGS:
• Read all safety and operating instructions before operating RoboMop.
• Retain the safety and operating instructions for future reference.
• Always be careful when using your RoboMop. To reduce the risk
of injury or damage, keep these safety precautions in mind when
setting up, using and maintaining your equipment.
• RoboMop must not be used for any other purpose other than its
intended use.
• Store out of reach of children.
• Do not bend the Cleaning Frame.
• Charge the robotic ball only when it is completely discharged.
• This is an indoor device only.
• Do not use RoboMop on wet or damp surfaces or where immersion
in water is a possibility.
• Operate your RoboMop only from the type of power source indicated
in this manual. If you are not sure of the type of power supplied to
your home, consult your local power company.
• Plug the AC Battery Charger into a voltage tape AC OUTLET ONLY.
Product may not be used with any type of power converter.
Any such use will immediately void the Warranty.
• Use only the AC Battery Charger supplied by the manufacturer
to charge and recharge
this device.
• Charge indoors only.
• Never handle the AC Battery Charger with wet hands.
• Always remove AC Battery Charger from wall and disconnect
RoboMop after charging.
• RoboMop is not for use on carpets.
• RoboMop is designed to clean one room at a time. Confine
RoboMop to the room you want cleaned by closing all doors.
• Observe RoboMop the first time it cleans a room to confirm it does
not get wedged under or stuck on top of uneven surfaces.
• The Cleaning Frame should not be washed. Clean softly with a
duster or clean with a dry soft cloth.
• Use the specifically designed electrostatic pads on dry floors only.
• Protect the Cleaning Frame from bending, warping or folding.
• When RoboMop is finished cleaning, remove RoboMop from the floor
to avoid tripping over it.
INSERT THE ROBOTIC BALL
IN THE CLEANING FRAME
Place the RoboMop ball into the
center of the Cleaning Frame.
Within 6 seconds, the RoboMop
will turn itself on automatically.
(See Figure F)
DISPOSAL OF PADS
Dispose soiled pads in the trash .
(See Figure H) Do not dispose
soiled pads in the toilet.
AUTOMATIC SHUT OFF
RoboMop will automatically shut
off when the program is complete,
based on the time you set it to. To
stop the RoboMop at any time,
simply press the Red OFF button.
When RoboMop is finished clean-
ing, remove it from the floor
to avoid tripping or falling over it.
(See Figure G)
6
step
Figure E
Figure F
Figure G
Figure H
54
SELECT CLEANING TIME
Press the Green ON/TIME button
located on your RoboMop under
the LCD screen on the left.
(See Figure E) The LCD display
screen will show the amount of
time the RoboMop will clean your
floor. To choose 1 hour and 30
minutes, press the ON/TIME but-
ton once. To choose 1 hour, press
the ON/TIME button twice. To
choose 30 minutes, press the
ON/TIME button three times.
Once you have chosen the time,
the ON/TIME button on the LCD
screen will flash 6X before turning
on automatically, allowing you
sufficient time to place the ball in
the Cleaning Frame.
4
step
5
step
7
step
STEP BY STEP GUIDE:
WARNINGS:
• Read all safety and operating instructions before operating RoboMop.
• Retain the safety and operating instructions for future reference.
• Always be careful when using your RoboMop. To reduce the risk
of injury or damage, keep these safety precautions in mind when
setting up, using and maintaining your equipment.
• RoboMop must not be used for any other purpose other than its
intended use.
• Store out of reach of children.
• Do not bend the Cleaning Frame.
• Charge the robotic ball only when it is completely discharged.
• This is an indoor device only.
• Do not use RoboMop on wet or damp surfaces or where immersion
in water is a possibility.
• Operate your RoboMop only from the type of power source indicated
in this manual. If you are not sure of the type of power supplied to
your home, consult your local power company.
• Plug the AC Battery Charger into a voltage tape AC OUTLET ONLY.
Product may not be used with any type of power converter.
Any such use will immediately void the Warranty.
• Use only the AC Battery Charger supplied by the manufacturer
to charge and recharge
this device.
• Charge indoors only.
• Never handle the AC Battery Charger with wet hands.
• Always remove AC Battery Charger from wall and disconnect
RoboMop after charging.
• RoboMop is not for use on carpets.
• RoboMop is designed to clean one room at a time. Confine
RoboMop to the room you want cleaned by closing all doors.
• Observe RoboMop the first time it cleans a room to confirm it does
not get wedged under or stuck on top of uneven surfaces.
• The Cleaning Frame should not be washed. Clean softly with a
duster or clean with a dry soft cloth.
• Use the specifically designed electrostatic pads on dry floors only.
• Protect the Cleaning Frame from bending, warping or folding.
• When RoboMop is finished cleaning, remove RoboMop from the floor
to avoid tripping over it.
INSERT THE ROBOTIC BALL
IN THE CLEANING FRAME
Place the RoboMop ball into the
center of the Cleaning Frame.
Within 6 seconds, the RoboMop
will turn itself on automatically.
(See Figure F)
DISPOSAL OF PADS
Dispose soiled pads in the trash .
(See Figure H) Do not dispose
soiled pads in the toilet.
AUTOMATIC SHUT OFF
RoboMop will automatically shut
off when the program is complete,
based on the time you set it to. To
stop the RoboMop at any time,
simply press the Red OFF button.
When RoboMop is finished clean-
ing, remove it from the floor
to avoid tripping or falling over it.
(See Figure G)
6
step
Figure E
Figure F
Figure G
Figure H
54
SELECT CLEANING TIME
Press the Green ON/TIME button
located on your RoboMop under
the LCD screen on the left.
(See Figure E) The LCD display
screen will show the amount of
time the RoboMop will clean your
floor. To choose 1 hour and 30
minutes, press the ON/TIME but-
ton once. To choose 1 hour, press
the ON/TIME button twice. To
choose 30 minutes, press the
ON/TIME button three times.
Once you have chosen the time,
the ON/TIME button on the LCD
screen will flash 6X before turning
on automatically, allowing you
sufficient time to place the ball in
the Cleaning Frame.
Figure E
Figure G
CHARGE THE ROBOTIC
BALL FOR 3-5 HOURS
Before initial use, charge the ball.
Insert the plug of the AC Battery
Charger into the Charger Port
jack of the Robotic Ball.
(See Figure A) Plug the AC
Battery Charger into a voltage tape
AC Outlet ONLY. (See Figure B)
The ball will fully charge in about
3-5 hours. Recharge the unit only
when it is completely discharged.
ATTACH ONE
ELECTROST A TIC PAD
Attach one disposable electrostatic
pad to the underside of the
Cleaning Frame and secure by
pushing the pad down onto the
black velcro tabs on the
Cleaning Frame. (See Figure C)
STEP BY STEP GUIDE:
2
step
1
step
FOR OPTIMAL CLEANING PERFORMANCE:
HELPFUL ROOM CLEANING TIPS:
PLACE THE CLEANING
FRAME IN THE CENTER
OF THE ROOM
Clear the room. Place the
Cleaning Frame in the center of the
room. (See Figure D) For prepa-
ration hints for clearing the room,
see page 6 of this operator’s man-
ual for our “For Optimal Cleaning
Performance” tips.”
Figure A
Figure B
Figure C
Figure D
RoboMop may come
upon a piece of furniture
like this couch, which
RoboMop can get
wedged up against and
get stuck. If RoboMop
can’t get out, just pull it
out and set it back to work
again. Or you can put a
small object in front of it,
so RoboMop can’t get
stuck underneath.
RoboMop can get
trapped between or
behind your furniture
because the entrance to
an area is barely big
enough for RoboMop
to fit through. Placing a
chair or plant in front of
the piece of furniture,
can solve the trouble so
it won’t stop working.
RoboMop may bump
into small items that can
spill and make a mess.
To make sure RoboMop
can clean the whole
floor; pick up any small
objects, just as you do
before you vacuum.
AVOID GETTING STUCK
AVOID MESSY SPILLS DON’T GET TRAPPED
3
step
For optimal cleaning performance, clear your floor of objects just as you would
before using a regular vacuum cleaner. Do not leave the following items on the
floor: clothing, loose papers, pull cords for blinds or curtains, power cords, or any
fragile items. RoboMop contacts walls, furniture and other objects as it cleans, so
please remove any items that may be pushed and knocked over by light contact
from RoboMop. If your room does not have a door, or there is access to a stairway
where RoboMop can fall down the stairs, simply block off the area with either a
chair, plant, gate or other object.
www.robomop.net
velcro tab
3
6
CHARGE THE ROBOTIC
BALL FOR 3-5 HOURS
Before initial use, charge the ball.
Insert the plug of the AC Battery
Charger into the Charger Port
jack of the Robotic Ball.
(See Figure A) Plug the AC
Battery Charger into a voltage tape
AC Outlet ONLY. (See Figure B)
The ball will fully charge in about
3-5 hours. Recharge the unit only
when it is completely discharged.
ATTACH ONE
ELECTROST A TIC PAD
Attach one disposable electrostatic
pad to the underside of the
Cleaning Frame and secure by
pushing the pad down onto the
black velcro tabs on the
Cleaning Frame. (See Figure C)
STEP BY STEP GUIDE:
2
step
1
step
FOR OPTIMAL CLEANING PERFORMANCE:
HELPFUL ROOM CLEANING TIPS:
PLACE THE CLEANING
FRAME IN THE CENTER
OF THE ROOM
Clear the room. Place the
Cleaning Frame in the center of the
room. (See Figure D) For prepa-
ration hints for clearing the room,
see page 6 of this operator’s man-
ual for our “For Optimal Cleaning
Performance” tips.”
Figure A
Figure B
Figure C
Figure D
RoboMop may come
upon a piece of furniture
like this couch, which
RoboMop can get
wedged up against and
get stuck. If RoboMop
can’t get out, just pull it
out and set it back to work
again. Or you can put a
small object in front of it,
so RoboMop can’t get
stuck underneath.
RoboMop can get
trapped between or
behind your furniture
because the entrance to
an area is barely big
enough for RoboMop
to fit through. Placing a
chair or plant in front of
the piece of furniture,
can solve the trouble so
it won’t stop working.
RoboMop may bump
into small items that can
spill and make a mess.
To make sure RoboMop
can clean the whole
floor; pick up any small
objects, just as you do
before you vacuum.
AVOID GETTING STUCK
AVOID MESSY SPILLS DON’T GET TRAPPED
3
step
For optimal cleaning performance, clear your floor of objects just as you would
before using a regular vacuum cleaner. Do not leave the following items on the
floor: clothing, loose papers, pull cords for blinds or curtains, power cords, or any
fragile items. RoboMop contacts walls, furniture and other objects as it cleans, so
please remove any items that may be pushed and knocked over by light contact
from RoboMop. If your room does not have a door, or there is access to a stairway
where RoboMop can fall down the stairs, simply block off the area with either a
chair, plant, gate or other object.
www.robomop.net
velcro tab
3
6
CHARGE THE ROBOTIC
BALL FOR 3-5 HOURS
Before initial use, charge the ball.
Insert the plug of the AC Battery
Charger into the Charger Port
jack of the Robotic Ball.
(See Figure A) Plug the AC
Battery Charger into a voltage tape
AC Outlet ONLY. (See Figure B)
The ball will fully charge in about
3-5 hours. Recharge the unit only
when it is completely discharged.
ATTACH ONE
ELECTROST A TIC PAD
Attach one disposable electrostatic
pad to the underside of the
Cleaning Frame and secure by
pushing the pad down onto the
black velcro tabs on the
Cleaning Frame. (See Figure C)
STEP BY STEP GUIDE:
2
step
1
step
FOR OPTIMAL CLEANING PERFORMANCE:
HELPFUL ROOM CLEANING TIPS:
PLACE THE CLEANING
FRAME IN THE CENTER
OF THE ROOM
Clear the room. Place the
Cleaning Frame in the center of the
room. (See Figure D) For prepa-
ration hints for clearing the room,
see page 6 of this operator’s man-
ual for our “For Optimal Cleaning
Performance” tips.”
Figure A
Figure B
Figure C
Figure D
RoboMop may come
upon a piece of furniture
like this couch, which
RoboMop can get
wedged up against and
get stuck. If RoboMop
can’t get out, just pull it
out and set it back to work
again. Or you can put a
small object in front of it,
so RoboMop can’t get
stuck underneath.
RoboMop can get
trapped between or
behind your furniture
because the entrance to
an area is barely big
enough for RoboMop
to fit through. Placing a
chair or plant in front of
the piece of furniture,
can solve the trouble so
it won’t stop working.
RoboMop may bump
into small items that can
spill and make a mess.
To make sure RoboMop
can clean the whole
floor; pick up any small
objects, just as you do
before you vacuum.
AVOID GETTING STUCK
AVOID MESSY SPILLS DON’T GET TRAPPED
3
step
For optimal cleaning performance, clear your floor of objects just as you would
before using a regular vacuum cleaner. Do not leave the following items on the
floor: clothing, loose papers, pull cords for blinds or curtains, power cords, or any
fragile items. RoboMop contacts walls, furniture and other objects as it cleans, so
please remove any items that may be pushed and knocked over by light contact
from RoboMop. If your room does not have a door, or there is access to a stairway
where RoboMop can fall down the stairs, simply block off the area with either a
chair, plant, gate or other object.
www.robomop.net
velcro tab
3
6
CHARGE THE ROBOTIC
BALL FOR 3-5 HOURS
Before initial use, charge the ball.
Insert the plug of the AC Battery
Charger into the Charger Port
jack of the Robotic Ball.
(See Figure A) Plug the AC
Battery Charger into a voltage tape
AC Outlet ONLY. (See Figure B)
The ball will fully charge in about
3-5 hours. Recharge the unit only
when it is completely discharged.
ATTACH ONE
ELECTROST A TIC PAD
Attach one disposable electrostatic
pad to the underside of the
Cleaning Frame and secure by
pushing the pad down onto the
black velcro tabs on the
Cleaning Frame. (See Figure C)
STEP BY STEP GUIDE:
2
step
1
step
FOR OPTIMAL CLEANING PERFORMANCE:
HELPFUL ROOM CLEANING TIPS:
PLACE THE CLEANING
FRAME IN THE CENTER
OF THE ROOM
Clear the room. Place the
Cleaning Frame in the center of the
room. (See Figure D) For prepa-
ration hints for clearing the room,
see page 6 of this operator’s man-
ual for our “For Optimal Cleaning
Performance” tips.”
Figure A
Figure B
Figure C
Figure D
RoboMop may come
upon a piece of furniture
like this couch, which
RoboMop can get
wedged up against and
get stuck. If RoboMop
can’t get out, just pull it
out and set it back to work
again. Or you can put a
small object in front of it,
so RoboMop can’t get
stuck underneath.
RoboMop can get
trapped between or
behind your furniture
because the entrance to
an area is barely big
enough for RoboMop
to fit through. Placing a
chair or plant in front of
the piece of furniture,
can solve the trouble so
it won’t stop working.
RoboMop may bump
into small items that can
spill and make a mess.
To make sure RoboMop
can clean the whole
floor; pick up any small
objects, just as you do
before you vacuum.
AVOID GETTING STUCK
AVOID MESSY SPILLS DON’T GET TRAPPED
3
step
For optimal cleaning performance, clear your floor of objects just as you would
before using a regular vacuum cleaner. Do not leave the following items on the
floor: clothing, loose papers, pull cords for blinds or curtains, power cords, or any
fragile items. RoboMop contacts walls, furniture and other objects as it cleans, so
please remove any items that may be pushed and knocked over by light contact
from RoboMop. If your room does not have a door, or there is access to a stairway
where RoboMop can fall down the stairs, simply block off the area with either a
chair, plant, gate or other object.
www.robomop.net
velcro tab
3
6
CHARGE THE ROBOTIC
BALL FOR 3-5 HOURS
Before initial use, charge the ball.
Insert the plug of the AC Battery
Charger into the Charger Port
jack of the Robotic Ball.
(See Figure A) Plug the AC
Battery Charger into a voltage tape
AC Outlet ONLY. (See Figure B)
The ball will fully charge in about
3-5 hours. Recharge the unit only
when it is completely discharged.
ATTACH ONE
ELECTROST A TIC PAD
Attach one disposable electrostatic
pad to the underside of the
Cleaning Frame and secure by
pushing the pad down onto the
black velcro tabs on the
Cleaning Frame. (See Figure C)
STEP BY STEP GUIDE:
2
step
1
step
FOR OPTIMAL CLEANING PERFORMANCE:
HELPFUL ROOM CLEANING TIPS:
PLACE THE CLEANING
FRAME IN THE CENTER
OF THE ROOM
Clear the room. Place the
Cleaning Frame in the center of the
room. (See Figure D) For prepa-
ration hints for clearing the room,
see page 6 of this operator’s man-
ual for our “For Optimal Cleaning
Performance” tips.”
Figure A
Figure B
Figure C
Figure D
RoboMop may come
upon a piece of furniture
like this couch, which
RoboMop can get
wedged up against and
get stuck. If RoboMop
can’t get out, just pull it
out and set it back to work
again. Or you can put a
small object in front of it,
so RoboMop can’t get
stuck underneath.
RoboMop can get
trapped between or
behind your furniture
because the entrance to
an area is barely big
enough for RoboMop
to fit through. Placing a
chair or plant in front of
the piece of furniture,
can solve the trouble so
it won’t stop working.
RoboMop may bump
into small items that can
spill and make a mess.
To make sure RoboMop
can clean the whole
floor; pick up any small
objects, just as you do
before you vacuum.
AVOID GETTING STUCK
AVOID MESSY SPILLS DON’T GET TRAPPED
3
step
For optimal cleaning performance, clear your floor of objects just as you would
before using a regular vacuum cleaner. Do not leave the following items on the
floor: clothing, loose papers, pull cords for blinds or curtains, power cords, or any
fragile items. RoboMop contacts walls, furniture and other objects as it cleans, so
please remove any items that may be pushed and knocked over by light contact
from RoboMop. If your room does not have a door, or there is access to a stairway
where RoboMop can fall down the stairs, simply block off the area with either a
chair, plant, gate or other object.
www.robomop.net
velcro tab
3
6
4
step
5
step
7
step
STEP BY STEP GUIDE:
WARNINGS:
• Read all safety and operating instructions before operating RoboMop.
• Retain the safety and operating instructions for future reference.
• Always be careful when using your RoboMop. To reduce the risk
of injury or damage, keep these safety precautions in mind when
setting up, using and maintaining your equipment.
• RoboMop must not be used for any other purpose other than its
intended use.
• Store out of reach of children.
• Do not bend the Cleaning Frame.
• Charge the robotic ball only when it is completely discharged.
• This is an indoor device only.
• Do not use RoboMop on wet or damp surfaces or where immersion
in water is a possibility.
• Operate your RoboMop only from the type of power source indicated
in this manual. If you are not sure of the type of power supplied to
your home, consult your local power company.
• Plug the AC Battery Charger into a voltage tape AC OUTLET ONLY.
Product may not be used with any type of power converter.
Any such use will immediately void the Warranty.
• Use only the AC Battery Charger supplied by the manufacturer
to charge and recharge
this device.
• Charge indoors only.
• Never handle the AC Battery Charger with wet hands.
• Always remove AC Battery Charger from wall and disconnect
RoboMop after charging.
• RoboMop is not for use on carpets.
• RoboMop is designed to clean one room at a time. Confine
RoboMop to the room you want cleaned by closing all doors.
• Observe RoboMop the first time it cleans a room to confirm it does
not get wedged under or stuck on top of uneven surfaces.
• The Cleaning Frame should not be washed. Clean softly with a
duster or clean with a dry soft cloth.
• Use the specifically designed electrostatic pads on dry floors only.
• Protect the Cleaning Frame from bending, warping or folding.
• When RoboMop is finished cleaning, remove RoboMop from the floor
to avoid tripping over it.
INSERT THE ROBOTIC BALL
IN THE CLEANING FRAME
Place the RoboMop ball into the
center of the Cleaning Frame.
Within 6 seconds, the RoboMop
will turn itself on automatically.
(See Figure F)
DISPOSAL OF PADS
Dispose soiled pads in the trash .
(See Figure H) Do not dispose
soiled pads in the toilet.
AUTOMATIC SHUT OFF
RoboMop will automatically shut
off when the program is complete,
based on the time you set it to. To
stop the RoboMop at any time,
simply press the Red OFF button.
When RoboMop is finished clean-
ing, remove it from the floor
to avoid tripping or falling over it.
(See Figure G)
6
step
Figure E
Figure F
Figure G
Figure H
54
SELECT CLEANING TIME
Press the Green ON/TIME button
located on your RoboMop under
the LCD screen on the left.
(See Figure E) The LCD display
screen will show the amount of
time the RoboMop will clean your
floor. To choose 1 hour and 30
minutes, press the ON/TIME but-
ton once. To choose 1 hour, press
the ON/TIME button twice. To
choose 30 minutes, press the
ON/TIME button three times.
Once you have chosen the time,
the ON/TIME button on the LCD
screen will flash 6X before turning
on automatically, allowing you
sufficient time to place the ball in
the Cleaning Frame.
4
step
5
step
7
step
STEP BY STEP GUIDE:
WARNINGS:
• Read all safety and operating instructions before operating RoboMop.
• Retain the safety and operating instructions for future reference.
• Always be careful when using your RoboMop. To reduce the risk
of injury or damage, keep these safety precautions in mind when
setting up, using and maintaining your equipment.
• RoboMop must not be used for any other purpose other than its
intended use.
• Store out of reach of children.
• Do not bend the Cleaning Frame.
• Charge the robotic ball only when it is completely discharged.
• This is an indoor device only.
• Do not use RoboMop on wet or damp surfaces or where immersion
in water is a possibility.
• Operate your RoboMop only from the type of power source indicated
in this manual. If you are not sure of the type of power supplied to
your home, consult your local power company.
• Plug the AC Battery Charger into a voltage tape AC OUTLET ONLY.
Product may not be used with any type of power converter.
Any such use will immediately void the Warranty.
• Use only the AC Battery Charger supplied by the manufacturer
to charge and recharge
this device.
• Charge indoors only.
• Never handle the AC Battery Charger with wet hands.
• Always remove AC Battery Charger from wall and disconnect
RoboMop after charging.
• RoboMop is not for use on carpets.
• RoboMop is designed to clean one room at a time. Confine
RoboMop to the room you want cleaned by closing all doors.
• Observe RoboMop the first time it cleans a room to confirm it does
not get wedged under or stuck on top of uneven surfaces.
• The Cleaning Frame should not be washed. Clean softly with a
duster or clean with a dry soft cloth.
• Use the specifically designed electrostatic pads on dry floors only.
• Protect the Cleaning Frame from bending, warping or folding.
• When RoboMop is finished cleaning, remove RoboMop from the floor
to avoid tripping over it.
INSERT THE ROBOTIC BALL
IN THE CLEANING FRAME
Place the RoboMop ball into the
center of the Cleaning Frame.
Within 6 seconds, the RoboMop
will turn itself on automatically.
(See Figure F)
DISPOSAL OF PADS
Dispose soiled pads in the trash .
(See Figure H) Do not dispose
soiled pads in the toilet.
AUTOMATIC SHUT OFF
RoboMop will automatically shut
off when the program is complete,
based on the time you set it to. To
stop the RoboMop at any time,
simply press the Red OFF button.
When RoboMop is finished clean-
ing, remove it from the floor
to avoid tripping or falling over it.
(See Figure G)
6
step
Figure E
Figure F
Figure G
Figure H
54
SELECT CLEANING TIME
Press the Green ON/TIME button
located on your RoboMop under
the LCD screen on the left.
(See Figure E) The LCD display
screen will show the amount of
time the RoboMop will clean your
floor. To choose 1 hour and 30
minutes, press the ON/TIME but-
ton once. To choose 1 hour, press
the ON/TIME button twice. To
choose 30 minutes, press the
ON/TIME button three times.
Once you have chosen the time,
the ON/TIME button on the LCD
screen will flash 6X before turning
on automatically, allowing you
sufficient time to place the ball in
the Cleaning Frame.
4
step
5
step
7
step
STEP BY STEP GUIDE:
WARNINGS:
• Read all safety and operating instructions before operating RoboMop.
• Retain the safety and operating instructions for future reference.
• Always be careful when using your RoboMop. To reduce the risk
of injury or damage, keep these safety precautions in mind when
setting up, using and maintaining your equipment.
• RoboMop must not be used for any other purpose other than its
intended use.
• Store out of reach of children.
• Do not bend the Cleaning Frame.
• Charge the robotic ball only when it is completely discharged.
• This is an indoor device only.
• Do not use RoboMop on wet or damp surfaces or where immersion
in water is a possibility.
• Operate your RoboMop only from the type of power source indicated
in this manual. If you are not sure of the type of power supplied to
your home, consult your local power company.
• Plug the AC Battery Charger into a voltage tape AC OUTLET ONLY.
Product may not be used with any type of power converter.
Any such use will immediately void the Warranty.
• Use only the AC Battery Charger supplied by the manufacturer
to charge and recharge
this device.
• Charge indoors only.
• Never handle the AC Battery Charger with wet hands.
• Always remove AC Battery Charger from wall and disconnect
RoboMop after charging.
• RoboMop is not for use on carpets.
• RoboMop is designed to clean one room at a time. Confine
RoboMop to the room you want cleaned by closing all doors.
• Observe RoboMop the first time it cleans a room to confirm it does
not get wedged under or stuck on top of uneven surfaces.
• The Cleaning Frame should not be washed. Clean softly with a
duster or clean with a dry soft cloth.
• Use the specifically designed electrostatic pads on dry floors only.
• Protect the Cleaning Frame from bending, warping or folding.
• When RoboMop is finished cleaning, remove RoboMop from the floor
to avoid tripping over it.
INSERT THE ROBOTIC BALL
IN THE CLEANING FRAME
Place the RoboMop ball into the
center of the Cleaning Frame.
Within 6 seconds, the RoboMop
will turn itself on automatically.
(See Figure F)
DISPOSAL OF PADS
Dispose soiled pads in the trash .
(See Figure H) Do not dispose
soiled pads in the toilet.
AUTOMATIC SHUT OFF
RoboMop will automatically shut
off when the program is complete,
based on the time you set it to. To
stop the RoboMop at any time,
simply press the Red OFF button.
When RoboMop is finished clean-
ing, remove it from the floor
to avoid tripping or falling over it.
(See Figure G)
6
step
Figure E
Figure F
Figure G
Figure H
54
SELECT CLEANING TIME
Press the Green ON/TIME button
located on your RoboMop under
the LCD screen on the left.
(See Figure E) The LCD display
screen will show the amount of
time the RoboMop will clean your
floor. To choose 1 hour and 30
minutes, press the ON/TIME but-
ton once. To choose 1 hour, press
the ON/TIME button twice. To
choose 30 minutes, press the
ON/TIME button three times.
Once you have chosen the time,
the ON/TIME button on the LCD
screen will flash 6X before turning
on automatically, allowing you
sufficient time to place the ball in
the Cleaning Frame.
4
step
5
step
7
step
STEP BY STEP GUIDE:
WARNINGS:
• Read all safety and operating instructions before operating RoboMop.
• Retain the safety and operating instructions for future reference.
• Always be careful when using your RoboMop. To reduce the risk
of injury or damage, keep these safety precautions in mind when
setting up, using and maintaining your equipment.
• RoboMop must not be used for any other purpose other than its
intended use.
• Store out of reach of children.
• Do not bend the Cleaning Frame.
• Charge the robotic ball only when it is completely discharged.
• This is an indoor device only.
• Do not use RoboMop on wet or damp surfaces or where immersion
in water is a possibility.
• Operate your RoboMop only from the type of power source indicated
in this manual. If you are not sure of the type of power supplied to
your home, consult your local power company.
• Plug the AC Battery Charger into a voltage tape AC OUTLET ONLY.
Product may not be used with any type of power converter.
Any such use will immediately void the Warranty.
• Use only the AC Battery Charger supplied by the manufacturer
to charge and recharge
this device.
• Charge indoors only.
• Never handle the AC Battery Charger with wet hands.
• Always remove AC Battery Charger from wall and disconnect
RoboMop after charging.
• RoboMop is not for use on carpets.
• RoboMop is designed to clean one room at a time. Confine
RoboMop to the room you want cleaned by closing all doors.
• Observe RoboMop the first time it cleans a room to confirm it does
not get wedged under or stuck on top of uneven surfaces.
• The Cleaning Frame should not be washed. Clean softly with a
duster or clean with a dry soft cloth.
• Use the specifically designed electrostatic pads on dry floors only.
• Protect the Cleaning Frame from bending, warping or folding.
• When RoboMop is finished cleaning, remove RoboMop from the floor
to avoid tripping over it.
INSERT THE ROBOTIC BALL
IN THE CLEANING FRAME
Place the RoboMop ball into the
center of the Cleaning Frame.
Within 6 seconds, the RoboMop
will turn itself on automatically.
(See Figure F)
DISPOSAL OF PADS
Dispose soiled pads in the trash .
(See Figure H) Do not dispose
soiled pads in the toilet.
AUTOMATIC SHUT OFF
RoboMop will automatically shut
off when the program is complete,
based on the time you set it to. To
stop the RoboMop at any time,
simply press the Red OFF button.
When RoboMop is finished clean-
ing, remove it from the floor
to avoid tripping or falling over it.
(See Figure G)
6
step
Figure E
Figure F
Figure G
Figure H
54
SELECT CLEANING TIME
Press the Green ON/TIME button
located on your RoboMop under
the LCD screen on the left.
(See Figure E) The LCD display
screen will show the amount of
time the RoboMop will clean your
floor. To choose 1 hour and 30
minutes, press the ON/TIME but-
ton once. To choose 1 hour, press
the ON/TIME button twice. To
choose 30 minutes, press the
ON/TIME button three times.
Once you have chosen the time,
the ON/TIME button on the LCD
screen will flash 6X before turning
on automatically, allowing you
sufficient time to place the ball in
the Cleaning Frame.
Figure E
Figure G
CHARGE THE ROBOTIC
BALL FOR 3-5 HOURS
Before initial use, charge the ball.
Insert the plug of the AC Battery
Charger into the Charger Port
jack of the Robotic Ball.
(See Figure A) Plug the AC
Battery Charger into a voltage tape
AC Outlet ONLY. (See Figure B)
The ball will fully charge in about
3-5 hours. Recharge the unit only
when it is completely discharged.
ATTACH ONE
ELECTROST A TIC PAD
Attach one disposable electrostatic
pad to the underside of the
Cleaning Frame and secure by
pushing the pad down onto the
black velcro tabs on the
Cleaning Frame. (See Figure C)
STEP BY STEP GUIDE:
2
step
1
step
FOR OPTIMAL CLEANING PERFORMANCE:
HELPFUL ROOM CLEANING TIPS:
PLACE THE CLEANING
FRAME IN THE CENTER
OF THE ROOM
Clear the room. Place the
Cleaning Frame in the center of the
room. (See Figure D) For prepa-
ration hints for clearing the room,
see page 6 of this operator’s man-
ual for our “For Optimal Cleaning
Performance” tips.”
Figure A
Figure B
Figure C
Figure D
RoboMop may come
upon a piece of furniture
like this couch, which
RoboMop can get
wedged up against and
get stuck. If RoboMop
can’t get out, just pull it
out and set it back to work
again. Or you can put a
small object in front of it,
so RoboMop can’t get
stuck underneath.
RoboMop can get
trapped between or
behind your furniture
because the entrance to
an area is barely big
enough for RoboMop
to fit through. Placing a
chair or plant in front of
the piece of furniture,
can solve the trouble so
it won’t stop working.
RoboMop may bump
into small items that can
spill and make a mess.
To make sure RoboMop
can clean the whole
floor; pick up any small
objects, just as you do
before you vacuum.
AVOID GETTING STUCK
AVOID MESSY SPILLS DON’T GET TRAPPED
3
step
For optimal cleaning performance, clear your floor of objects just as you would
before using a regular vacuum cleaner. Do not leave the following items on the
floor: clothing, loose papers, pull cords for blinds or curtains, power cords, or any
fragile items. RoboMop contacts walls, furniture and other objects as it cleans, so
please remove any items that may be pushed and knocked over by light contact
from RoboMop. If your room does not have a door, or there is access to a stairway
where RoboMop can fall down the stairs, simply block off the area with either a
chair, plant, gate or other object.
www.robomop.net
velcro tab
3
6
CHARGE THE ROBOTIC
BALL FOR 3-5 HOURS
Before initial use, charge the ball.
Insert the plug of the AC Battery
Charger into the Charger Port
jack of the Robotic Ball.
(See Figure A) Plug the AC
Battery Charger into a voltage tape
AC Outlet ONLY. (See Figure B)
The ball will fully charge in about
3-5 hours. Recharge the unit only
when it is completely discharged.
ATTACH ONE
ELECTROST A TIC PAD
Attach one disposable electrostatic
pad to the underside of the
Cleaning Frame and secure by
pushing the pad down onto the
black velcro tabs on the
Cleaning Frame. (See Figure C)
STEP BY STEP GUIDE:
2
step
1
step
FOR OPTIMAL CLEANING PERFORMANCE:
HELPFUL ROOM CLEANING TIPS:
PLACE THE CLEANING
FRAME IN THE CENTER
OF THE ROOM
Clear the room. Place the
Cleaning Frame in the center of the
room. (See Figure D) For prepa-
ration hints for clearing the room,
see page 6 of this operator’s man-
ual for our “For Optimal Cleaning
Performance” tips.”
Figure A
Figure B
Figure C
Figure D
RoboMop may come
upon a piece of furniture
like this couch, which
RoboMop can get
wedged up against and
get stuck. If RoboMop
can’t get out, just pull it
out and set it back to work
again. Or you can put a
small object in front of it,
so RoboMop can’t get
stuck underneath.
RoboMop can get
trapped between or
behind your furniture
because the entrance to
an area is barely big
enough for RoboMop
to fit through. Placing a
chair or plant in front of
the piece of furniture,
can solve the trouble so
it won’t stop working.
RoboMop may bump
into small items that can
spill and make a mess.
To make sure RoboMop
can clean the whole
floor; pick up any small
objects, just as you do
before you vacuum.
AVOID GETTING STUCK
AVOID MESSY SPILLS DON’T GET TRAPPED
3
step
For optimal cleaning performance, clear your floor of objects just as you would
before using a regular vacuum cleaner. Do not leave the following items on the
floor: clothing, loose papers, pull cords for blinds or curtains, power cords, or any
fragile items. RoboMop contacts walls, furniture and other objects as it cleans, so
please remove any items that may be pushed and knocked over by light contact
from RoboMop. If your room does not have a door, or there is access to a stairway
where RoboMop can fall down the stairs, simply block off the area with either a
chair, plant, gate or other object.
www.robomop.net
velcro tab
3
6
CHARGE THE ROBOTIC
BALL FOR 3-5 HOURS
Before initial use, charge the ball.
Insert the plug of the AC Battery
Charger into the Charger Port
jack of the Robotic Ball.
(See Figure A) Plug the AC
Battery Charger into a voltage tape
AC Outlet ONLY. (See Figure B)
The ball will fully charge in about
3-5 hours. Recharge the unit only
when it is completely discharged.
ATTACH ONE
ELECTROST A TIC PAD
Attach one disposable electrostatic
pad to the underside of the
Cleaning Frame and secure by
pushing the pad down onto the
black velcro tabs on the
Cleaning Frame. (See Figure C)
STEP BY STEP GUIDE:
2
step
1
step
FOR OPTIMAL CLEANING PERFORMANCE:
HELPFUL ROOM CLEANING TIPS:
PLACE THE CLEANING
FRAME IN THE CENTER
OF THE ROOM
Clear the room. Place the
Cleaning Frame in the center of the
room. (See Figure D) For prepa-
ration hints for clearing the room,
see page 6 of this operator’s man-
ual for our “For Optimal Cleaning
Performance” tips.”
Figure A
Figure B
Figure C
Figure D
RoboMop may come
upon a piece of furniture
like this couch, which
RoboMop can get
wedged up against and
get stuck. If RoboMop
can’t get out, just pull it
out and set it back to work
again. Or you can put a
small object in front of it,
so RoboMop can’t get
stuck underneath.
RoboMop can get
trapped between or
behind your furniture
because the entrance to
an area is barely big
enough for RoboMop
to fit through. Placing a
chair or plant in front of
the piece of furniture,
can solve the trouble so
it won’t stop working.
RoboMop may bump
into small items that can
spill and make a mess.
To make sure RoboMop
can clean the whole
floor; pick up any small
objects, just as you do
before you vacuum.
AVOID GETTING STUCK
AVOID MESSY SPILLS DON’T GET TRAPPED
3
step
For optimal cleaning performance, clear your floor of objects just as you would
before using a regular vacuum cleaner. Do not leave the following items on the
floor: clothing, loose papers, pull cords for blinds or curtains, power cords, or any
fragile items. RoboMop contacts walls, furniture and other objects as it cleans, so
please remove any items that may be pushed and knocked over by light contact
from RoboMop. If your room does not have a door, or there is access to a stairway
where RoboMop can fall down the stairs, simply block off the area with either a
chair, plant, gate or other object.
www.robomop.net
velcro tab
3
6
4
step
5
step
7
step
STEP BY STEP GUIDE:
WARNINGS:
• Read all safety and operating instructions before operating RoboMop.
• Retain the safety and operating instructions for future reference.
• Always be careful when using your RoboMop. To reduce the risk
of injury or damage, keep these safety precautions in mind when
setting up, using and maintaining your equipment.
• RoboMop must not be used for any other purpose other than its
intended use.
• Store out of reach of children.
• Do not bend the Cleaning Frame.
• Charge the robotic ball only when it is completely discharged.
• This is an indoor device only.
• Do not use RoboMop on wet or damp surfaces or where immersion
in water is a possibility.
• Operate your RoboMop only from the type of power source indicated
in this manual. If you are not sure of the type of power supplied to
your home, consult your local power company.
• Plug the AC Battery Charger into a voltage tape AC OUTLET ONLY.
Product may not be used with any type of power converter.
Any such use will immediately void the Warranty.
• Use only the AC Battery Charger supplied by the manufacturer
to charge and recharge
this device.
• Charge indoors only.
• Never handle the AC Battery Charger with wet hands.
• Always remove AC Battery Charger from wall and disconnect
RoboMop after charging.
• RoboMop is not for use on carpets.
• RoboMop is designed to clean one room at a time. Confine
RoboMop to the room you want cleaned by closing all doors.
• Observe RoboMop the first time it cleans a room to confirm it does
not get wedged under or stuck on top of uneven surfaces.
• The Cleaning Frame should not be washed. Clean softly with a
duster or clean with a dry soft cloth.
• Use the specifically designed electrostatic pads on dry floors only.
• Protect the Cleaning Frame from bending, warping or folding.
• When RoboMop is finished cleaning, remove RoboMop from the floor
to avoid tripping over it.
INSERT THE ROBOTIC BALL
IN THE CLEANING FRAME
Place the RoboMop ball into the
center of the Cleaning Frame.
Within 6 seconds, the RoboMop
will turn itself on automatically.
(See Figure F)
DISPOSAL OF PADS
Dispose soiled pads in the trash .
(See Figure H) Do not dispose
soiled pads in the toilet.
AUTOMATIC SHUT OFF
RoboMop will automatically shut
off when the program is complete,
based on the time you set it to. To
stop the RoboMop at any time,
simply press the Red OFF button.
When RoboMop is finished clean-
ing, remove it from the floor
to avoid tripping or falling over it.
(See Figure G)
6
step
Figure E
Figure F
Figure G
Figure H
54
SELECT CLEANING TIME
Press the Green ON/TIME button
located on your RoboMop under
the LCD screen on the left.
(See Figure E) The LCD display
screen will show the amount of
time the RoboMop will clean your
floor. To choose 1 hour and 30
minutes, press the ON/TIME but-
ton once. To choose 1 hour, press
the ON/TIME button twice. To
choose 30 minutes, press the
ON/TIME button three times.
Once you have chosen the time,
the ON/TIME button on the LCD
screen will flash 6X before turning
on automatically, allowing you
sufficient time to place the ball in
the Cleaning Frame.
Figure E
4
step
5
step
7
step
STEP BY STEP GUIDE:
WARNINGS:
• Read all safety and operating instructions before operating RoboMop.
• Retain the safety and operating instructions for future reference.
• Always be careful when using your RoboMop. To reduce the risk
of injury or damage, keep these safety precautions in mind when
setting up, using and maintaining your equipment.
• RoboMop must not be used for any other purpose other than its
intended use.
• Store out of reach of children.
• Do not bend the Cleaning Frame.
• Charge the robotic ball only when it is completely discharged.
• This is an indoor device only.
• Do not use RoboMop on wet or damp surfaces or where immersion
in water is a possibility.
• Operate your RoboMop only from the type of power source indicated
in this manual. If you are not sure of the type of power supplied to
your home, consult your local power company.
• Plug the AC Battery Charger into a voltage tape AC OUTLET ONLY.
Product may not be used with any type of power converter.
Any such use will immediately void the Warranty.
• Use only the AC Battery Charger supplied by the manufacturer
to charge and recharge
this device.
• Charge indoors only.
• Never handle the AC Battery Charger with wet hands.
• Always remove AC Battery Charger from wall and disconnect
RoboMop after charging.
• RoboMop is not for use on carpets.
• RoboMop is designed to clean one room at a time. Confine
RoboMop to the room you want cleaned by closing all doors.
• Observe RoboMop the first time it cleans a room to confirm it does
not get wedged under or stuck on top of uneven surfaces.
• The Cleaning Frame should not be washed. Clean softly with a
duster or clean with a dry soft cloth.
• Use the specifically designed electrostatic pads on dry floors only.
• Protect the Cleaning Frame from bending, warping or folding.
• When RoboMop is finished cleaning, remove RoboMop from the floor
to avoid tripping over it.
INSERT THE ROBOTIC BALL
IN THE CLEANING FRAME
Place the RoboMop ball into the
center of the Cleaning Frame.
Within 6 seconds, the RoboMop
will turn itself on automatically.
(See Figure F)
DISPOSAL OF PADS
Dispose soiled pads in the trash .
(See Figure H) Do not dispose
soiled pads in the toilet.
AUTOMATIC SHUT OFF
RoboMop will automatically shut
off when the program is complete,
based on the time you set it to. To
stop the RoboMop at any time,
simply press the Red OFF button.
When RoboMop is finished clean-
ing, remove it from the floor
to avoid tripping or falling over it.
(See Figure G)
6
step
Figure E
Figure F
Figure G
Figure H
54
SELECT CLEANING TIME
Press the Green ON/TIME button
located on your RoboMop under
the LCD screen on the left.
(See Figure E) The LCD display
screen will show the amount of
time the RoboMop will clean your
floor. To choose 1 hour and 30
minutes, press the ON/TIME but-
ton once. To choose 1 hour, press
the ON/TIME button twice. To
choose 30 minutes, press the
ON/TIME button three times.
Once you have chosen the time,
the ON/TIME button on the LCD
screen will flash 6X before turning
on automatically, allowing you
sufficient time to place the ball in
the Cleaning Frame.
4
step
5
step
7
step
STEP BY STEP GUIDE:
WARNINGS:
• Read all safety and operating instructions before operating RoboMop.
• Retain the safety and operating instructions for future reference.
• Always be careful when using your RoboMop. To reduce the risk
of injury or damage, keep these safety precautions in mind when
setting up, using and maintaining your equipment.
• RoboMop must not be used for any other purpose other than its
intended use.
• Store out of reach of children.
• Do not bend the Cleaning Frame.
• Charge the robotic ball only when it is completely discharged.
• This is an indoor device only.
• Do not use RoboMop on wet or damp surfaces or where immersion
in water is a possibility.
• Operate your RoboMop only from the type of power source indicated
in this manual. If you are not sure of the type of power supplied to
your home, consult your local power company.
• Plug the AC Battery Charger into a voltage tape AC OUTLET ONLY.
Product may not be used with any type of power converter.
Any such use will immediately void the Warranty.
• Use only the AC Battery Charger supplied by the manufacturer
to charge and recharge
this device.
• Charge indoors only.
• Never handle the AC Battery Charger with wet hands.
• Always remove AC Battery Charger from wall and disconnect
RoboMop after charging.
• RoboMop is not for use on carpets.
• RoboMop is designed to clean one room at a time. Confine
RoboMop to the room you want cleaned by closing all doors.
• Observe RoboMop the first time it cleans a room to confirm it does
not get wedged under or stuck on top of uneven surfaces.
• The Cleaning Frame should not be washed. Clean softly with a
duster or clean with a dry soft cloth.
• Use the specifically designed electrostatic pads on dry floors only.
• Protect the Cleaning Frame from bending, warping or folding.
• When RoboMop is finished cleaning, remove RoboMop from the floor
to avoid tripping over it.
INSERT THE ROBOTIC BALL
IN THE CLEANING FRAME
Place the RoboMop ball into the
center of the Cleaning Frame.
Within 6 seconds, the RoboMop
will turn itself on automatically.
(See Figure F)
DISPOSAL OF PADS
Dispose soiled pads in the trash .
(See Figure H) Do not dispose
soiled pads in the toilet.
AUTOMATIC SHUT OFF
RoboMop will automatically shut
off when the program is complete,
based on the time you set it to. To
stop the RoboMop at any time,
simply press the Red OFF button.
When RoboMop is finished clean-
ing, remove it from the floor
to avoid tripping or falling over it.
(See Figure G)
6
step
Figure E
Figure F
Figure G
Figure H
54
SELECT CLEANING TIME
Press the Green ON/TIME button
located on your RoboMop under
the LCD screen on the left.
(See Figure E) The LCD display
screen will show the amount of
time the RoboMop will clean your
floor. To choose 1 hour and 30
minutes, press the ON/TIME but-
ton once. To choose 1 hour, press
the ON/TIME button twice. To
choose 30 minutes, press the
ON/TIME button three times.
Once you have chosen the time,
the ON/TIME button on the LCD
screen will flash 6X before turning
on automatically, allowing you
sufficient time to place the ball in
the Cleaning Frame.
4
step
5
step
7
step
STEP BY STEP GUIDE:
WARNINGS:
• Read all safety and operating instructions before operating RoboMop.
• Retain the safety and operating instructions for future reference.
• Always be careful when using your RoboMop. To reduce the risk
of injury or damage, keep these safety precautions in mind when
setting up, using and maintaining your equipment.
• RoboMop must not be used for any other purpose other than its
intended use.
• Store out of reach of children.
• Do not bend the Cleaning Frame.
• Charge the robotic ball only when it is completely discharged.
• This is an indoor device only.
• Do not use RoboMop on wet or damp surfaces or where immersion
in water is a possibility.
• Operate your RoboMop only from the type of power source indicated
in this manual. If you are not sure of the type of power supplied to
your home, consult your local power company.
• Plug the AC Battery Charger into a voltage tape AC OUTLET ONLY.
Product may not be used with any type of power converter.
Any such use will immediately void the Warranty.
• Use only the AC Battery Charger supplied by the manufacturer
to charge and recharge
this device.
• Charge indoors only.
• Never handle the AC Battery Charger with wet hands.
• Always remove AC Battery Charger from wall and disconnect
RoboMop after charging.
• RoboMop is not for use on carpets.
• RoboMop is designed to clean one room at a time. Confine
RoboMop to the room you want cleaned by closing all doors.
• Observe RoboMop the first time it cleans a room to confirm it does
not get wedged under or stuck on top of uneven surfaces.
• The Cleaning Frame should not be washed. Clean softly with a
duster or clean with a dry soft cloth.
• Use the specifically designed electrostatic pads on dry floors only.
• Protect the Cleaning Frame from bending, warping or folding.
• When RoboMop is finished cleaning, remove RoboMop from the floor
to avoid tripping over it.
INSERT THE ROBOTIC BALL
IN THE CLEANING FRAME
Place the RoboMop ball into the
center of the Cleaning Frame.
Within 6 seconds, the RoboMop
will turn itself on automatically.
(See Figure F)
DISPOSAL OF PADS
Dispose soiled pads in the trash .
(See Figure H) Do not dispose
soiled pads in the toilet.
AUTOMATIC SHUT OFF
RoboMop will automatically shut
off when the program is complete,
based on the time you set it to. To
stop the RoboMop at any time,
simply press the Red OFF button.
When RoboMop is finished clean-
ing, remove it from the floor
to avoid tripping or falling over it.
(See Figure G)
6
step
Figure E
Figure F
Figure G
Figure H
54
SELECT CLEANING TIME
Press the Green ON/TIME button
located on your RoboMop under
the LCD screen on the left.
(See Figure E) The LCD display
screen will show the amount of
time the RoboMop will clean your
floor. To choose 1 hour and 30
minutes, press the ON/TIME but-
ton once. To choose 1 hour, press
the ON/TIME button twice. To
choose 30 minutes, press the
ON/TIME button three times.
Once you have chosen the time,
the ON/TIME button on the LCD
screen will flash 6X before turning
on automatically, allowing you
sufficient time to place the ball in
the Cleaning Frame.
Figure G
Figure G
BRUGSANVISNING
IMPORTANT: • Rechargez la boule robotique uniquement lorsqu’elle est complètement déchargée.
• N’utilisez pas le RoboMop sur des surfaces humides ou lorsque une immersion dans l’eau est
une possibilité.• Conservez le RoboMop hors de portée des enfants.
• Branchez le chargeur d’accus AC dans une PRISE DE COURANT AC UNIQUEMENT. Le produit ne
peut pas être utilisé avec n’importe quel type de transformateur. • Utilisez uniquement le chargeur
d’accus AC fourni par le fabricant pour charger et recharger ce dispositif. • Chargez à l’intérieur
uniquement. • Enlevez toujours le chargeur d’accus AC du mur et débranchez le RoboMop après le
chargement. • Le RoboMop ne peut pas être utilisé sur des tapis.
VARNING: • Ladda ej RoboMop när den inte är helt urladdad. • Använd ej RoboMop på blöta eller
fuktiga ytor.• Håll utom räckhåll för barn. Anslut endast batteriladdaren i vanliga vägguttag med
ström enligt adapterns specikationer. • Använd endast batteriladdare från tillverkaren. • Ladda
endast inomhus. • Ta alltid bort batteriladdaren från väggen och koppla ur RoboMop när du laddat
färdigt. • RoboMop är ej avsedd för mattor.
ATTENZIONE: • Caricare la palla soltanto quando è completamente scarica.
• Non usare su pavimenti bagnati o dentro l’acqua. • Tenere lontanto dalla portata dei bambini
• Utilizzare il carica batterie solo con tensioni 220V come da speciche su alimentatore.
• Utilizzare il caricabatterie fornito a corredo.• Carica soltanto al chiuso. • Togliete il
caricabatteria dalla spina quando il Robomop è carico. • Non utilizzare il Robomop sui tappeti.
AVISOS: • Cargue la bola robótica solo cuando esté completamente descargada. • No use el
Robomop sobre supercies mojadas o húmedas, o donde haya posibilidad de que haya inmersión
en agua. • Deje fuera del alcance de los niños. • Conecte el cargador de bacteria AC únicamente
en una toma de pared AC 220 V de acuerdo con las especicaciones del adaptador. • Use exclusi-
vamente el cargador de Batería AC suministrado por el fabricante. • Cargue solamente en lugares
de interior. • Después de la carga extraiga siempre el cargador de la toma de pared y desconéctelo
del Robomop. • El Robomop no puede ser usado sobre alfombras u otras supercies textiles.
4
step
5
step
7
step
STEP BY STEP GUIDE:
WARNINGS:
• Read all safety and operating instructions before operating RoboMop.
• Retain the safety and operating instructions for future reference.
• Always be careful when using your RoboMop. To reduce the risk
of injury or damage, keep these safety precautions in mind when
setting up, using and maintaining your equipment.
• RoboMop must not be used for any other purpose other than its
intended use.
• Store out of reach of children.
• Do not bend the Cleaning Frame.
• Charge the robotic ball only when it is completely discharged.
• This is an indoor device only.
• Do not use RoboMop on wet or damp surfaces or where immersion
in water is a possibility.
• Operate your RoboMop only from the type of power source indicated
in this manual. If you are not sure of the type of power supplied to
your home, consult your local power company.
• Plug the AC Battery Charger into a voltage tape AC OUTLET ONLY.
Product may not be used with any type of power converter.
Any such use will immediately void the Warranty.
• Use only the AC Battery Charger supplied by the manufacturer
to charge and recharge
this device.
• Charge indoors only.
• Never handle the AC Battery Charger with wet hands.
• Always remove AC Battery Charger from wall and disconnect
RoboMop after charging.
• RoboMop is not for use on carpets.
• RoboMop is designed to clean one room at a time. Confine
RoboMop to the room you want cleaned by closing all doors.
• Observe RoboMop the first time it cleans a room to confirm it does
not get wedged under or stuck on top of uneven surfaces.
• The Cleaning Frame should not be washed. Clean softly with a
duster or clean with a dry soft cloth.
• Use the specifically designed electrostatic pads on dry floors only.
• Protect the Cleaning Frame from bending, warping or folding.
• When RoboMop is finished cleaning, remove RoboMop from the floor
to avoid tripping over it.
INSERT THE ROBOTIC BALL
IN THE CLEANING FRAME
Place the RoboMop ball into the
center of the Cleaning Frame.
Within 6 seconds, the RoboMop
will turn itself on automatically.
(See Figure F)
DISPOSAL OF PADS
Dispose soiled pads in the trash .
(See Figure H) Do not dispose
soiled pads in the toilet.
AUTOMATIC SHUT OFF
RoboMop will automatically shut
off when the program is complete,
based on the time you set it to. To
stop the RoboMop at any time,
simply press the Red OFF button.
When RoboMop is finished clean-
ing, remove it from the floor
to avoid tripping or falling over it.
(See Figure G)
6
step
Figure E
Figure F
Figure G
Figure H
54
SELECT CLEANING TIME
Press the Green ON/TIME button
located on your RoboMop under
the LCD screen on the left.
(See Figure E) The LCD display
screen will show the amount of
time the RoboMop will clean your
floor. To choose 1 hour and 30
minutes, press the ON/TIME but-
ton once. To choose 1 hour, press
the ON/TIME button twice. To
choose 30 minutes, press the
ON/TIME button three times.
Once you have chosen the time,
the ON/TIME button on the LCD
screen will flash 6X before turning
on automatically, allowing you
sufficient time to place the ball in
the Cleaning Frame.
Figure E
2

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Robomop robomop basic wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info