Bedienungsanleitung Robomow RC302 (Seite 35 von 50) (Englisch)

537218

Zoom out

Zoom in

Vorherige Seite

1/50

Nächste Seite

Screen Seng Descripon Opons

P011

Anti-Theft

(Default = OFF)

• The Anti-Theft feature alarms the surroundings in the event of an

unintended removal of the mower from its designated area.

• To turn the Anti-Theft On for the rst time, set it to ‘On’ and choose a

PIN code of 4 digits.

Tip: Select a number you can remember. Write it down (bottom of

Chapter 10), and keep it in a safe place.

• When the Anti-Theft system is activated, 0000 will be displayed.

Enter your 4-digit code to deactivate the Anti-Theft.

• If the code is not entered, then the message is changed to U062

(Alarm will soon be activated). Enter the code, otherwise the alarm

will start.

On/ OFF

1234

P012

Anti-Theft

Change PIN code

• Allows changing of the Anti-Theft PIN code.

• Enter a new code and then re-enter the new code for conrmation.

0000

P013

Base Station

(Default = ON)

• This option should be used for a Separated Zone which has a

Base Station or when adding a Base Station to a model that does

not have one.

• If you have dened more than one zone, then select the relevant

zone before changing the setting.

On/ OFF

P014

Add Separated

Zone

• Enables the addition of a Separated Zone.

• L2 is displayed for Separated Zone A – press OK.

• Scroll to set the area of the Separated Zone and press OK.

100

P015

Remove

Separated Zone

• Enables the removal of a Separated Zone.

• Choose the Zone you ant to remove and press OK.

P016

Sound

(Default = ON)

• Use the Sound option to turn all non-safety sounds off.

On/ OFF

P017

Mobile

Communication

System

(Default = OFF)

• Enables remote communication with the mower using a GSM

Module Accessory, which can be purchased separately.

• For more information refer to Section 12 – Accessories.

On/ OFF

P018

Statistics

(Default = OFF)

• This menu is displayed only if P018 is set to ‘On.

• Enables to send the operation statistics from the mower to the

manufacturer for diagnostics in case of problems.

On/ OFF

P019

Bluetooth Remote

Control Pairing

• Enables the pairing process between your Robomow and

an outdoor Bluetooth Remote Control that is available as an

accessory (Refer to Paragraph 12 Accessories).

6.4.3

Robomow App Settings

Using the Robomow App you will have access to additional menu options that are not available on the mower,

such as an option to manage additional zones, and the option to set an additional window of Inactive Hours.

6.5

Operation in a Non-Base Zone (using a Perimeter Switch)

In order for Robomow to operate in a Non-Base Zone, the Perimeter Switch has to be turned on and the mower

should be inside the active perimeter area.

• Verify that the Perimeter Switch is connected to the zone to be mowed.

• Press the ‘ON’ button to turn on the Perimeter Switch.

• Drive/carry Robomow to the lawn area.

• To initiate the operation, choose the operation mode you want, press the arrow buttons to choose the Zone

you want to mow and press OK to start operation (refer to Section 6.3).

• When Robomow completes the mowing, it wil stay on the lawn. You will have to drive/carry it back to its place

for charging.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Robomow RC302 Seite 35

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Robomow RC302

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info