Bedienungsanleitung Robomow RC304 - 2016 (Seite 37 von 58) (Englisch)

644650

Zoom out

Zoom in

Vorherige Seite

1/58

Nächste Seite

Screen Seng Descripon Opons

P003

Near Wire Follow

(Default = ON)

• When Robomow completes its operation, or when the ‘Home’ button

instructs it to Go To Base, it drives itself to the Base Station.

• Robomow drives along the Perimeter Wire with a dynamic offset (not

centered) to prevent wheel tracks along the same path. This return

behavior can be turned off.

• This menu is not available for RC304 and MC400 models.

• For all other models, the Near Wire Follow feature can be enabled

and congured for a Sub-Zone as well.

On/OFF

P004

Max Near Wire

Follow Distance

(Default =

changed based on

the lawn area)

• The maximum distance Robomow will drive from the wire when

returning to the Base Station.

• The distance does not represent actual units of measurement.

• The offset Distance values range from 1 to 12. They represent

different distances from the wire.

• The higher the Distance setting, the smaller the probability of tracks

along the perimeter.

• Perimeter Islands that are relatively close to the Perimeter Wire or

narrow passages may prevent the mower to complete its drive to the

Base Station with ‘Near Wire Follow’ mode. In such cases decrease

the distance to allow the mower to complete the drive to the Base

Station.

• This menu is not available for RC304 and MC400 models.

• For all other models, the Near Wire Follow feature can be enabled

and congured for a Sub-Zone as well.

1-12

P005

Min Near Wire

Follow Distance

(Default = 1)

• The minimum distance Robomow will drive from the wire when

returning to the Base Station.

• The larger the number, the bigger the distance the mower will drive

from the wire while returns to the Base Station.

• This menu is not available for RC304 and MC400 models.

• For all other models, the Near Wire Follow feature can be enabled

and congured for a Sub-Zone as well.

1-5

P006

Near Wire Follow

Test

• Enables to test the mower in the max ‘Near wire Follow Distance’

that is dened in menu P004.

• If the mower is not able to complete the drive in ‘Near Wire’ mode

smoothly, then it is recommended to reduce the max distance set in

menu P004.

• This menu is not available for RC304 and MC400 models.

P007

Rain Sensor

(Default = On)

• The Rain Sensor feature halts operation on rainy or highly humid

weather.

• This is recommended for the health of the lawn. However, mowing

wet grass does not present any technical problem.

Note! It may take a few minutes before Robomow detects rainy or

humid conditions. This is done in order to avoid false-detections. As

soon as the mower detects rain, it halts current mowing operation

and starts searching for the Base Station. When the ‘Islands’ feature

is set to On (see menu P002 above), the mower will execute a special

method of searching for the Base Station. As a result it may take the

mower more time (up to 20-30 minutes) to arrive to the Base Station.

On/OFF

P008

Rain Sensor

Sensitivity

(Default = 25)

• Robomow detects rain when the current reading value is below the

set Sensitivity value and postpones operation.

• The higher the Sensitivity setting, the more sensitive Robomow is to

rain detection.

0-30

P009

Edging On/Off

(Default = ON)

• Edging is a special mode, in which Robomow follows the perimeter

wire for complete and accurate mowing of the lawn edges.

• In lawns where the edge is not maintained well and the mower fails

to complete the drive along the edge of the lawn, it is recommended

to set Edging to ‘Off’.

• Setting Edging to ‘Off’ disables Edging mode in automatic departures

from the station, but still allows edge-mowing when pressing the

‘Edge’ mode button on the operating panel.

On/OFF

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Robomow RC304 - 2016 Seite 37

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Robomow RC304 - 2016

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info