Bedienungsanleitung Robomow RC312u (Seite 36 von 58) (Englisch)

664046

Zoom out

Zoom in

Vorherige Seite

1/58

Nächste Seite

6.4.1.4 Area – Update the size of the lawn in case it has been changed.

• Press the ‘Setting’ button 4 times until the Area icon is blinking.

• Scroll to change the area and press ‘OK’ toconrm.

• Ifmorethanonezoneisdened,thenrstscrolltoselectthezoneyouwanttoeditandsetthearea

for that zone as described above.

Names of zones are as follows:

L1 – Main Zone

L2 – Separated Zone A

L3 – Separated Zone B

A1 – Sub-Zone 1

A2 – Sub-Zone 2

A3 – Sub-Zone 3

A4 – Sub-Zone 4

• The SUP value stretches lawn’s area size beyond the recommended lawn area size setting (“Maximum”

vs “Recommended” lawn size in model’s spec). ‘Maximum Lawn Size’ represents ideal mowing

conditions:atlevellawn,simplerectangularshape,noobstacles,noadditionalzones,andmodest

lawn growing pace.

• TheSUPvalueisonlyavailableforselectionifnoadditionalzonesaredened.

• If either Mowing Frequency or Inactive Time settings are altered after the Area has been set to SUP,

then the Area setting will be automatically decreased to the next lower value.

6.4.2 Advanced Settings

The Advanced Settings are additional menu options that are not changed very often and thus are not included

in the Basic Settings.

• To change any option/feature in the Advanced Settings, press the ‘Settings’ button continuously for 3 Sec.

• Menu ‘P001’ is displayed. Use the arrows to scroll to the setting you want to change, and then press OK.

• Use the arrow button to change the setting and press OKtoconrm.

• Scroll to change additional menu options or press STOP to go back to the main display.

Below are the Advanced Settings options:

Screen Seng Descripon Opons

P001

Mowing

Frequency

(Default = 2)

• Controls the frequency of mowing cycles in a particular

zone of your lawn.

• The default mowing frequency is Medium (equivalent to two

mowing cycles in a week). It means that Robomow will complete

the entire mowing of your lawn twice a week.

• The numbers in the menu represent the following values of

mowing frequency:

1 – LOW (one mowing cycle in a week)

2 – MEDIUM (two mowing cycles in a week)

3 – HIGH (equivalent to daily mowing)

• The ‘Mowing Frequency’ option is only available for zones where a

basestationisinstalled.Ifyouhavedenedatleastoneseprated

zone with a base station (see menus P013 and P014), then you

will be prompted to select the relevant zone before changing the

setting (L1 stands for the Main Zone, L2 stands for Separated

Zone A, etc.)

• During off-season when the growth rate of the grass is slower,

it is recommended to change the Mowing Frequency to ‘LOW’.

This resting period helps the grass and prolongs the lifetime of

the mower.

• Grass growth rate changes during the year (depending on

temperature, grass type, fertilizing etc.).

• High fertilization and favorable weather conditions may cause the

grass to grow faster. In such cases, set the ‘Mowing Frequency’

option to High.

1/2/3

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Robomow RC312u Seite 36

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Robomow RC312u

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info