7
Robomow
®
Safety Features
1. Child Guard / Safety Guard (Level I)
This menu option offers a safety feature to help prevent children or others not familiar with the safe
operation of the mower to operate it freely.
2. Anti-Theft / Safety Guard (level II)
The anti-theft system provides the user a disabling function that will prevent anyone from
using or driving the Robomow unless they have the valid code to enter. You will be prompted
to enter a four-digit code of your choice to use as your personal security code.
3. Lift Sensor
There is a Hall-Effect Sensor (Magnetic Position Sensor) located in the front side of
Robomow. In case the front of the mower is raised approximately 1-inch from its resting
position on the ground during blade operation, the blade will immediately stop rotating (< 1
second).
4. Tilt Sensor
There is an optical sensor located in the front side of Robomow. In case the front of the mower
is lifted up towards a vertically position, the blade will stop immediately and Robomow will
warn about it and instruct the user to remove the fuse before lifting Robomow.
5. Bumper Sensor
The bumper is equipped with Hall Effect sensor activates when the mower strikes a solid,
fixed object and when the bumper cover is open. When the bumper sensor is activated, the
mower will stop the rotation of the blade immediately (<1 second), will stop movement in that
direction and reverse itself away from the obstacle.
6. Emergency Stop Button
Located on the control panel, red in color. Pressing this button at any time during operation
will stop all mower movement and stop the rotation of the blade immediately (<1 second).
7. Batteries Fuse
Located below the bumper cover, on the left side of Robomow. Removing the battery fuse will
prevent any operation of the Robomow. It is required to remove the fuse before lifting
Robomow and before any maintenance is done.
8. Two-Step Operator Presence Control
While in manual mode using the remote control, it requires two independent finger actions in
order to engage the mower blade. Once engaged, the mower blade button must remain
depressed to continue blade operation. Once released, the two-step engagement process
must be repeated.
9. Electronically Controlled Charging System
Robomow is equipped with an on-board charge control system. This allows you to keep the
charger connected at all times, even after the battery is fully charged. The control system will
prevent an overcharge to the battery and keep it fully charged and maintained for the next
use.
10. Sealed Batteries
The batteries that operate the Robomow are completely sealed and will not leak any type of
fluids, regardless of position. In addition, the batteries contain a one-time-use fuse in the
event of a short-circuit or power malfunction.
