Bedienungsanleitung Robomow TC1000 (Seite 8 von 52) (Englisch)

644648

Zoom out

Zoom in

Vorherige Seite

1/52

Nächste Seite

2.2 How Robomow Works for You

• First, you need to install a perimeter wire around the entire lawn

and around protected areas within the lawn area.

• The Perimeter Wire sets the boundaries for Robomow. The

Perimeter Wire is laid around the edges of the lawn and around

trees, plants, ponds and objects that you want to prevent

Robomow to run into.

• If the supplied wire is not sufcient, more wire can be purchased

and spliced with a supplied connector to the existing wire.

• Small pegs are used to fasten the Perimeter Wire into the

ground, below grass level.

• The Perimeter Wire will gradually disappear under the growth

of new grass until it will be invisible.

• The Base Station is placed along the Perimeter Wire. It performs

two basic functions:

- Generate a signal along the Perimeter Wire.

- Charge Robomow’s batteries.

• The Power Box is connected between the Base Station and a

230V / 120V wall socket, using a 15m (50 ft.) long low voltage

cable.

• After having completed the installation of the Perimeter Wire, Base Station, and the Power Box, and performing

the One-Time Setup [needs to be performed before operating Robomow for the rst time – detailed

instructions are in the following chapters], Robomow will do all the mowing for you for during the entire season!

• Robomow is a robotic lawn mower that is powered by a maintenance-free battery. It leaves its Base Station at

scheduled mowing times. Robomow mows the lawn and then drives back to the Base Station to be charged and

ready for its next scheduled mowing.

• As soon as Robomow departs for mowing, the Base Station automatically triggers a special signal. This signal

creates a virtual wall, visible only to Robomow. This signal keeps Robomow within the lawn boundaries, and

prevents it from entering areas it was intended to skip or protect.

Tree surrounded by a groove, ditch or flower beds

requires a wire around it.

Perimeter wire as a

virtual wall,visible only

to Robomow

Base Station and Power Box:

- Generates signal along the wire.

- Charges Robomow’s battery.

Large trees: Robomow is allowed to bump

into them. at this size, the objects do not

require a Perimeter Wire around them

Robomow detects the signal

and changes direction as it

reaches the wire

Large trees: Robomow is allowed to bump into

them. at this size the objects do not require a

Perimiter Wire around them

Base Station and Power Box:

- Generates signal along the wire.

- Charges Robomow’s battery.

Robomow detects the signal and

changes direction as it reaches

the wire

Perimiter wire as a virtual

wall, visible only to Ro-

bomow

Tree surrounded by a groove, ditch or ower beds requires

a qire around it.

Peg

Perimiter Wire

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Robomow TC1000 Seite 8

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Robomow TC1000

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info