Bedienungsanleitung Robomow TC1000 (Seite 33 von 52) (Englisch)

644648

Zoom out

Zoom in

Vorherige Seite

1/52

Nächste Seite

6.4.1.4 Area – Update the size of the lawn in case it has been changed.

• Press the ‘Setting’ button 4 times until the Area icon is blinking.

• Scroll to change the area and press ‘OK’ to conrm.

• If more than one zone is dened, then rst scroll to select the zone you want to edit and set the area

for that zone as described above.

Names of zones are as follows:

L1 – Main Zone

L2 – Separated Zone A

L3 – Separated Zone B

A1 – Sub-Zone 1

A2 – Sub-Zone 2

A3 – Sub-Zone 3

A4 – Sub-Zone 4

6.4.2 Advanced Settings

The Advanced Settings are additional menu options that are not changed very often and thus are not included

in the Basic Settings.

• To change any option/feature in the Advanced Settings, press the ‘Settings’ button continuously for 3 Sec.

• ‘P001’ is displayed. Use the arrows to scroll to the setting you want to change, and then press OK.

• Use the arrow button to change the setting and press OK to conrm.

• Scroll to change additional menu options or press STOP to go back to the main display.

Below are the Advanced Settings options:

Screen Seng Descripon Opons

P001

Mowing

Frequency

(Default = 2)

• Controls the frequency of mowing cycles in a particular

zone of your lawn.

• The default mowing frequency is Medium (equivalent to two

mowing cycles in a week). It means that Robomow will complete

the entire mowing of your lawn twice a week.

• The numbers in the menu represent the following values of

mowing frequency:

1 – LOW (one mowing cycle in a week)

2 – MEDIUM (two mowing cycles in a week)

3 – HIGH (daily mowing with accordance to Inactive Time)

• If there is more than one zone, the Mowing Frequency can be

set for all zones together or for each zone individually. You can

choose All for all zones or scroll to a particular zone you want to

change.

• During off-season when the growth rate of the grass is slower,

it is recommended to change the Mowing Frequency to ‘LOW’.

This resting period helps the grass and prolongs the lifetime of

the mower.

• Grass growth rate changes during the year (depending on

temperature, grass type, fertilizing and etc.).

• High fertilization and favorable weather conditions may cause the

grass to grow faster. In such cases, use the Mowing Frequency

option to decrease the time between cycles.

1/2/3

P002

Islands (Default =

OFF)

• In rare cases, you may notice that the mower unnecessarily circles

around a Perimeter Island, while searching for the Base Station.

• The Islands option helps overcome this situation. To avoid such

cases, turn the Islands feature On.

• When the Islands feature is set to On, the mower will execute a

special method of searching for the Base Station. As a result it may

take the mower longer time to arrive to the Base Station.

• See also menu P006 below.

On/OFF

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Robomow TC1000 Seite 33

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Robomow TC1000

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info