739024
29
Zoom out
Zoom in
Vorherige Seite
1/37
Nächste Seite
Troubleshooting
27
Fault display Solution
When a runtime error occurs, the power light flashes red quickly and a voice prompt is given. Please use the table below to
solve the problem.
Error 1: Turn the laser unit and check that it is not jammed
or blocked.
The laser is stuck or has been blocked. Remove any blockages and retry. If the
problem persists, move the main unit to a new location and restart it.
Error 8: Remove any obstacles around the main unit. The main unit may be stuck or caught on an obstacle. Clear any obstacles around it.
Error 2: Clean and lightly tap the bumper.
The bumper is stuck. Lightly tap the bumper to remove any blockages. If no
blockages are found, move the main unit to a new location and restart it.
Error 3: Move the main unit to a new location and restart.
A wheel is not in contact with the ground. Move the main unit to a new location
and restart it.
Error 4: Clean cliff sensors, move the main unit away from any
drops, then restart.
The main unit is on standby. Move it to a new location and restart it. This problem
may be caused by a dirty cliff sensor. Wipe sensor and retry.
Error 5: Remove and clean the main brush and
brush bearing.
The main brush may have become tangled. Remove and clean it and its bearing.
Error 6: Remove and clean the side brush. The side brush may have become entangled. Remove it for cleaning.
Error 7: Check that wheels are not blocked, then move the
main unit to a new location and restart.
The main wheel may have become entangled. Remove it and restart the main
unit.
Error 9: Reinstall dustbin and filter.
Reinstall the dustbin and filter and check that they are installed correctly. If the
problem persists, try replacing the filter.
29

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Roborock S6 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Roborock S6

Roborock S6 Bedienungsanleitung - Deutsch - 38 seiten

Roborock S6 Bedienungsanleitung - Französisch - 38 seiten

Roborock S6 Bedienungsanleitung - Italienisch - 38 seiten

Roborock S6 Bedienungsanleitung - Spanisch - 38 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info