Bedienungsanleitung Robust RB-HP 1334 (Seite 17 von 44) (Deutsch, Englisch, Portugiesisch, Spanisch)

735498

Zoom out

Zoom in

Vorherige Seite

1/44

Nächste Seite

- 17 -

2. Damage to hearing if no suitable ear protec-

tion is used.

3. Health damage caused by hand-arm vib-

rations if the equipment is used over a pro-

longed period or is not properly guided and

maintained.

5. Before starting the equipment

5.1 Using the equipment correctly

•

The pressure cleaner must be stood on a le-

vel, stable surface.

•

It is recommended that you adopt the correct

operating position every time you use the

equipment, with one hand on the gun and the

other on the lance.

•

Never direct the water jet at electrical lines or

the equipment itself.

•

So that the pump does not suffer any damage

when it is not in use, a small amount of leaka-

ge from the pump is normal.

•

Never use the machine in potentially explosi-

ve areas under any circumstances!

•

The operating temperature must be between

+5 and + 40°C.

•

Do not cover or modify the lance or the spray

nozzles in any way.

•

The pressure cleaner is designed to be used

with cold or lukewarm water; higher tempera-

tures can damage the pump.

•

Do not use water that is dirty, gritty or con-

tains any chemical products, as these could

impair operation and shorten the life of the

equipment.

Caution: Risk of explosion

Do not spray ﬂ ammable liquids.

Warning

Water that has passed through the non-return

valve is not drinkable.

Warning

If cleaning agent gets into contact with your skin

or into your eye, rinse immediately with lots of

clean water. Then consult a doctor or follow the

steps described on the safety data sheet or provi-

ded by the manufacturer of the cleaning agent.

5.2 Assembly

5.2.1 Assembling the equipment (Fig. 1)

Push the accessories holder (2) onto the high-

pressure cleaner (5). The holder can be used for

space-saving storage of the gun (8), the extensi-

on (9) and the high-pressure hose (14).

Note! Before using the pressure cleaner, make

sure that the high-pressure hose is completely

unwound.

5.2.2 Fitting the attachments (Fig. 2)

Before you use the high-pressure cleaner (5) you

must ﬁ rst fasten the extension (9) to the gun (8)

by pushing and twisting.

Then push the rotating nozzle (13) or the cleaning

agent container (10) onto the extension (9) by

means of the quick connection system.

Rotating nozzle

To remove particularly stubborn dirt, use the rota-

ting nozzle (13).

Cleaning agent container

You can adjust the quantity of cleaning agent you

want to add by turning (+ / -) on the setting wheel

(11). We recommend using the cleaning agent

sparingly.

5.2.3 Connecting the high-pressure hose

(Fig. 3/4)

Connect the high-pressure hose (14) to the gun

(8) and the high-pressure cleaner (5).

Note:

The connections for the high-pressure hose

and the accessories are equipped with a quick

connection system (12). To connect, simply push

the hose or the accessory onto the respective

connection. To remove, simply actuate the quick

connection system (12) and you can remove the

hose or the accessory.

Each time before ﬁ tting, always check that the

quick connection system (12) is correctly enga-

ged. Do this by pulling brieﬂ y on the hose or the

accessory.

Anl_RB_HP_1334_Arg_SPK7.indb 17Anl_RB_HP_1334_Arg_SPK7.indb 17 03.05.16 16:3303.05.16 16:33

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Robust RB-HP 1334 Seite 17

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info