14
SPECIFICATIONS
MODEL- POWER T3002 T4004
Continuous Power Rating (RMS) - Measured at 14.4 Battery Volts
4 Load Per Channel 50 Watts x 2 25 Watts x 4
2 Load Per Channel 100 Watts x 2 50 Watts x 4
1 Load Per Channel 150 Watts x 2 100 Watts x 4
4 Load Bridged 200 Watts x 1 100 Watts x 2
2 Load Bridged 300 Watts x 1 200 Watts x 2
Dimensions: Height 2.3" (5.80cm) 2.3" (5.80cm)
Width 12.9" (32.70cm) 12.9" (32.70cm)
Length 11.8" (30.00cm) 16.3" (41.50cm)
Amplifier Fuse Rating (Amp/Type) (2) 40A / ATC (2) 40A / ATC
Battery Fuse Rating (Amp) External 80A 80A
(Not Supplied)
Signal-to-Noise Ratio >80dB A-weighted @ 2Vrms
Crossover Slope 12dB/octave Butterworth
Crossover Frequency variable from 40Hz to 400Hz
Frequency Response 20Hz to 20kHz ±0.5dB
Bandwidth 20Hz to 200kHz ±3dB
Slew Rate 30 Volts/µS
IM Distortion (IHF) <0.05%
Signal Voltage Adjustment Range Variable from 150mV to 4V (RCA Input)
Protection NOMAD - Internal analog-computer output protection circuitry
limits power in case of overload, plus short protection.
Thermal switch shuts down the amplifier in case of overheating.
Equalization (Variable Punch Bass) Variable from 0dB to +18dB @ variable 35 to 70Hz
Input Impedance 10k ohms
These specifications are Amplifier Power Standard CEA-2006 Compliant
Specifications subject to change without notice
