Bedienungsanleitung Rocktrail HG09968 - IAN 445268 (Seite 17 von 60) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Spanisch, Polnisch)

819489

Zoom out

Zoom in

Vorherige Seite

1/60

Nächste Seite

12 GB/IE

Place objects in the centre of the product to

transport them.

WARNING! Do not sit on the side wall.

Danger of tipping.

Note: In case of discoloration/ fading of

supporting synthetic components they shall be

exchanged.

Assembly / Disassembly

WARNING! Crushing and shearing points

are present during assembly and disassembly.

Unfold the trolley:

1. Take out removable ﬂoor [2] from carrier bag

[1], (see Fig. A).

2. Release the velcro strap of the carrier bag and

remove the carrier bag [1] from the trolley [3],

(see Fig. B).

3. Loosen the velcro on the long strap

surrounding the trolley [3] and unfold the

trolley (seeFig.C).

4. Tie the velcro strap according to Figure C to

prevent the velcro strap fall to the ﬂoor.

1. First, the strap with buckle pass through the

shaft.

2. Then insert strap with velcro into the buckle.

3. Strap with velcro pass through another

shaft.

4. Lastly stick the velcro together to secure the

strap on the shaft.

5. Unfold the handle in front of trolley [3]

(seeFig.D1), turn the lock cap toward the

lower part of the handle shaft. Push the lock

cap downward and cover the lower part of the

handle shaft.

6. Insert the middle joint of trolley frame into the

cover at left and right side (see Fig. D).

WARNING! When the trolley is stationary

or not in use the handle must be secured with

the locking clip (see Fig. D, picture 4).

7. Place removable ﬂoor [2] to the folding trolley

[3], (see Fig. E). Fix the velcro strap on the

folding trolley [3] to the shaft of the front and

rear wheels.

Brakes are included with this product, located

on the wheels below the handle (see Fig.C

items J and K). User can initiate brake located

in front wheels according to Fig. J, user can

unlock the brake according to Fig. K.

Trolley symbol:

CAUTION: Initiate the brake when the product is

left in a stationary position.

Fold the trolley

1. Remove the removable ﬂoor [2] from folding

trolley [3].

2. Pull up the lock cap from handle shaft

(seeFig.F1), turn the locking position toward

the handle shaft, and fold the upper part of

handle shaft downward.

3. Remove the velcro strap from the front and rear

wheel shafts, than pull the strap in the middle

of the folding trolley (see Fig. G).

4. Tighten the folded trolley with velcro strap.

5. Cover the trolley with carrier bag [1] and

ﬁxing the carrier bag to trolley by velcro strap

(see Fig. H).

6. Insert the removable ﬂoor [2] to the side

pocket of carrier bag [1] (see Fig. I).

Maintenance

Keep the product in a dry and cool place

away from sunlight when not in use.

Check regularly to ensure no damage on the

product.

Only use spare parts supplied by the

manufacturer.

Cleaning and care

Use a damp, lint-free cloth to clean the

product.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Rocktrail HG09968 - IAN 445268 Seite 17

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info