Bedienungsanleitung Rocktrail TZ-10651 - IAN 388322 (Seite 17 von 84) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Spanisch, Polnisch)

819495

Zoom out

Zoom in

Vorherige Seite

1/84

Nächste Seite

17GB/IE

Use

WARNING! Precautionary

measures for ﬁre and ventilation.

Precautionary measures for your

safety:

• Additional ventilation is required

when using gas or other combus-

tion devices.

• Do not place hot appliances near

the walls, roof or door ﬂaps.

• Always follow the safety informa-

tion for these appliances.

• Never allow children to play near

hot appliances.

• Keep the entrance clear.

• Make sure you are aware of the

ﬁre precautions on the premises.

• Make sure the ventilation openings

are open at all times to prevent

suﬀocation.

There is a plastic eyelet on the inside

of the tent roof where you can hang

a camping light (not included in the

package contents). The tent’s inner

pockets can be used for daily items

or clothing.

Opening door and window

Note: water condensation general-

ly occurs in all tents, but especially

when there are strong temperature

ﬂuctuations. After a night in the tent,

there will be water condensation

drops on the inside surface. Conden-

sation is not a sign of leaks. Good

ventilation reduces condensation

inside the tent.

In order to open the tent entrance or

window:

1. Unzip the outer door and window

material.

2. Roll up the fabric lengthwise into

a roll.

3. Fasten it with the toggle to prevent

it from unrolling.

4. Unzip the inner door and window

material.

5. Roll up the fabric lengthwise into

a roll.

6. Fasten it with the toggle.

Note: the door of the outer tent can

be either half opened or completely

opened at the front. Use the loops

(2a) as shown in Fig. F.

Closing door and window

To completely close the tent en-

trance or window, proceed as

follows:

1. Unfasten the toggle.

2. Roll the fabric out.

3. Do up the zips.

Disassembly

Note: dismantle the tent in as dry

and clean a condition as possible,

to prevent mould formation and

stains. After dismantling in the rain,

let the product dry out completely

before packing it away. Clean all

components thoroughly before pack-

ing them away.

1. Remove all ground pegs (4)

(Fig. G).

2. Roll up the guy lines.

3. Remove the outer tent.

4. Pull the ﬁbreglass poles (3) oﬀ the

pins of the metal rings (1a) and

fold them up.

5. Place the ground pegs (4) and

the ﬁbreglass poles (3) in the

respective storage pouches (5)

and (6).

Folding pattern

1. Spread the inner tent (1) ﬂat.

2. Fold the inner tent ﬁrst lengthwise

to approx. one third of its width,

then once crosswise (Fig. H).

3. Lay the outer tent (2) folded in the

middle so that its sides lie on top

of each other.

4. Fold the outer tent once length-

wise, then twice crosswise as

shown in Fig. I.

Important! When folding, make

sure that the maximum folding

dimensions of the inner and outer

tent do not exceed the length of the

folded ﬁbreglass poles.

5. Place the folded inner tent on top

of the folded outer tent.

6. Place the storage pouches (5)

and (6) on one end of the fold-

ed tents and roll all components

together tightly.

7. Tie the rolled product with the ties

and stow it in the carry bag (7).

Repairs, care and

storage

Repairs

Small tears or holes in the fabric can

be repaired with standard repair

patches.

Small leaks along the seams can be

remedied with a seam spray (not

included in the package contents).

A waterprooﬁng spray can be used

on the tent surface.

Important! Do not use repair

patches on the seams.

Enquire at a specialist shop about

what repair materials to use and

how to use them. Follow the manu-

facturer’s instructions. Larger tears

should be repaired by someone with

technical skills.

Broken or defective frame parts

must immediately be replaced, and

must no longer be used. Enquire

at a specialist shop about suitable

replacement parts.

Zips

Note: zips are wearing parts and

are not covered by the warranty.

Regularly use a silicone spray (not

included in the package contents)

and apply it to the zips to prevent

unnecessary wear. Enquire at a spe-

cialist shop about a suitable silicone

spray and its use.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Rocktrail TZ-10651 - IAN 388322 Seite 17

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info