Bedienungsanleitung Roku soundbridge m1001 (Seite 8 von 40) (Englisch)

160658

Zoom out

Zoom in

Vorherige Seite

1/40

Nächste Seite

V. Connecting SoundBridge to AC Power

If you plan to use an Ethernet connection, be sure the cable is plugged in to the unit. Plug the

power cord into the SoundBridge unit, and plug the other end into to a wall outlet.

Hint: There is no power switch to turn on SoundBridge. As soon as you plug in the power,

you should quickly see the welcome message “Roku SoundBridge.” If not, please stop and

ensure that your power cable is connected properly on both ends.

VI. Using Your Remote Control

The SoundBridge remote control is an infrared remote, so it needs “line of sight” to

SoundBridge in order to operate. Point the remote in the direction of your SoundBridge,

and make sure that the IR receiver window is not blocked by another object..

VII. Establishing a Network Connection

Note: Do not plug in an Ethernet cable if you plan to use your wi-ﬁ network to avoid confusion

in the setup of the device. Also, if you plan to use an Ethernet connection, make sure the cable

is connected before powering up the device.

Wired Ethernet Network: After you have connected SoundBridge to your computer via a

switch/hub/router (or directly to your computer via crossover cable) and powered up the unit,

SoundBridge will auto-conﬁgure its network settings (using DHCP or AutoIP). There is nothing

you need to do. If for some reason you have trouble connecting to your network, select the

“System Conﬁguration” option, then select “Show Wired Ethernet Status.”

Wireless Network: If you have an open and visible Wi-Fi network in your home (one which

broadcasts its name, and which has no security keys set) then SoundBridge will auto-connect

to your wireless network. However, you will be asked to enter your network’s name (SSID) if:

- SoundBridge detects more than one Wi-Fi network (as some advanced users have in their

home, or if your neighbor’s signal is leaking over), or

- Your Wi-Fi network does not broadcast its name (for security reasons)

In these cases, enter the SSID using the remote control. Use the left/right  arrows to choose

letters, and use the up/down   arrows to change to Uppercase and to other character sets

(numbers, international characters) and to enter “Space”, “Delete” and “OK” when you’re done.

SoundBridge supports networks with WEP security. WPA is not yet supported. If you have a

WEP security key, you will need to enter your WEP key manually into SoundBridge. This is the

same key you have entered into your Access Point and your computer. Your screen will look

something like this:

No Music Libraries Found (Why?)

System Conguration

Scroll down using your remote control’s Down  arrow until the option “System Conﬁguration”

is highlighted, and press Select [4] on your remote control. You will see a screen that looks like

this:

Software Version & Updates

Select Wi-Fi SSID & Password

Show Wired Ethernet Status

Show Wi-Fi Status

Navigate down to “Select Wi-Fi SSID & Password” and enter your wireless network name and

password.

For additional help connecting to your network, including password help, see the Wi-Fi setup

section in the appendix of this guide.

Section 1: Getting StartedSection 1: Getting Started

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Roku soundbridge m1001 Seite 8

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Roku soundbridge m1001

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info