Bedienungsanleitung Roku soundbridge m1001 (Seite 24 von 40) (Englisch)

160658

Zoom out

Zoom in

Vorherige Seite

1/40

Nächste Seite

side of the Now Playing screen, and other options. Use the “Visualizer Settings” command on the

Settings screen to explore these options. (See appendix for full listing of visualizer options.)

Clock Settings

When in Standby mode, SoundBridge can display the date and time, similar to the screen

below.

1:17:49 PM

Monday, April 17, 2006

You can customize the clock display in a number of ways:

1. When in Standby mode, use the Left/Right

 arrows to adjust the brightness of the clock

display. (This will not affect the brightness settings of the display when in regular playback

mode.) Turn the brightness all the way down until you see the word “Standby” to have the

screen go completely blank when in Standby. If the screen is blank, pressing the Select [4]

key will momentarily display the time and date.

2. When in Standby mode, use the up/down

  arrows to cycle through modes of display.

For example, you can display large and small fonts, display the time but not the date, etc.

(Again, these settings will not be applied to your display when you resume SoundBridge’s

regular playback mode.)

3. Use the SoundBridge web page to conﬁgure the format of the date and time. You can also

turn off the clock display altogether. Please see the “SoundBridge Web Interface” chapter of

this user guide for instructions on launching your SoundBridge web page.

After your web page is launched, click on the Conﬁguration tab. Scroll down on the page until

you see a screen that looks similar to the one on page 43.

Here, you can customize how your time appears and correct errors in the display of your date

and time. First, be sure that your time zone is selected correctly. SoundBridge uses an Internet

connection to display the proper time for your time zone. If your Internet connection is not

available, SoundBridge will be unable to display the date and time in Standby mode.

Note that the default conﬁguration of the date and time ﬁelds depends upon the language you

have selected for your SoundBridge display, but may be edited to suit your needs.

Format your time display by choosing what to display in each of four ﬁelds. SoundBridge

“strings together” all the ﬁelds to create the time display. For example, if you don’t want to

see seconds, or don’t want to see “AM/PM”, select the hour and minute format, then choose

the “Leave Blank” in the remaining drop down menus. Take note of the small text-entry boxes

to the right of the pop-up menus. This is where you enter the character that should appear

between the sections of the time. For example, enter a colon (“:”) for the usual “12:15” format.

Section 9: Advanced Features

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Roku soundbridge m1001 Seite 24

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Roku soundbridge m1001

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info