Bedienungsanleitung Roland A-500PRO (Seite 41 von 96) (Englisch)

481049

Zoom out

Zoom in

Vorherige Seite

1/96

Nächste Seite

Performing (Play Mode)

Use Play mode when you want to play the A-PRO’s keyboard or use its controllers to

control your software or sound modules.

Broadly speaking, the A-PRO has the following two modes.

When you turn on the power, the A-PRO will start up in Play mode.

To return from Edit mode to Play mode, you can either press the [ACT] button and

[ ] button simultaneously, or hold down the [SHIFT] button and press the [SPLIT]

button ([BS] button). In this case, the settings you were in the process of making will be

discarded.

When you play the keyboard in Play mode, note messages will be transmitted, causing

your sound module to produce sound.

1 Specify the A-PRO’s current channel (MIDI transmit channel).

Set the A-PRO’s MIDI transmit channel to match the MIDI receive channel of your

sound module.

Setting the MIDI transmit channel is explained in “Specifying the Current Channel

(MIDI Transmit Channel)” (p. 42).

2 Use the A-PRO to select a sound on your sound module.

Selecting a sound on your sound module is explained in “Selecting Sounds

(PROGRAM CHANGE/BANK)” (p. 43).

3 Play the A-PRO’s keyboard.

When you’ve finished making settings, play the keyboard in Play mode; MIDI

messages will be transmitted to your application.

* Since the A-PRO keyboard does not contain a sound generator, it cannot produce

sound on its own.

Here are some of the functions you will find convenient when you’re performing.

Moving the bender lever toward the left while you play will lower the

pitch, and moving it toward the right will raise the pitch. This effect is

called “pitch bend.” Moving the lever away from yourself will apply

vibrato. This effect is called “modulation.”

If you move the lever to left or right and simultaneously move it away

from yourself, both effects will apply at the same time.

fig.PitchBend-e.eps

* The amount of pitch change (bend

range) depends on the settings of your

sound module.

* If you assign a MIDI message to the

bender lever, the pitch bend effect and

modulation effect will be disabled.

Mode Explanation To select

Play mode

This is the mode in which you play the keyboard

and operate the controllers.

MIDI messages will be transmitted by each con-

troller.

1. Turn on the power.

2. Exit EDIT mode.

Edit mode

(p. 48, p. 57)

This is the mode in which you assign MIDI mes-

sages to each controller, or make system settings.

1. From PLAY mode, press the

[ACT] button and [ ]

button simultaneously.

Playing the Keyboard

Convenient Performance Functions

Function Explanation

Changing the pitch of

a sounding note

(Pitch Bend)

Moving the bender lever to the left or right will transmit pitch bend mes-

sages, causing the pitch to change slightly.

* The range of the pitch change (“bend range”) will depend on the set-

tings of your sound module.

Applying modulation

to a sounding note

(Modulation)

Moving the bender lever away from yourself will transmit modulation

messages (CC#01), applying a vibrato effect to the sound.

* The way in which the sound changes will depend on the settings of your

sound module.

Switching the octave

(Octave Shift)

You can use the OCTAVE [–] [+] buttons to raise or lower the keyboard’s

pitch range in steps of an octave (Octave Shift). Use this when you want to

shift the keyboard’s pitch range upward or downward.

Pressing the OCTAVE [–] button once will lower the pitch by one octave.

Pressing it again will lower the pitch by another octave. You can adjust this

setting in a range of -4–5 octaves. Depending on the current octave shift

setting, the OCTAVE [–] or OCTAVE [+] button will light. By pressing the

OCTAVE [–] and OCTAVE [+] buttons simultaneously, you can reset the oc-

tave shift value to 0, restoring the keyboard to its original pitch.

Changing the pitch

(Transpose)

If you press the [TRANSPOSE] button to turn it on, the pitch will be shifted

by the number of semitone steps you specified using the EDIT mode

TRANSPOSE setting (p. 62).

Pitch bend eect Modulation eect

A-300_500_800C_e.book 41 ページ２０１４年８月１９日　火曜日　午後３時２７分

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Roland A-500PRO Seite 41

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Roland A-500PRO

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info