481059
66
Zoom out
Zoom in
Vorherige Seite
1/80
Nächste Seite
66
Troubleshooting
When the batteries run low, the display will indicate “Lo.” If this message appears, replace the batteries as soon as
possible.
Replacing the batteries will not erase the contents of SYSTEM settings (p. 47).
Check the power management settings
You may be able to eliminate clicks and pops by changing your system’s power management settings.
“Power management settings” (p. 57)
Try updating the driver of your display adaptor (Windows)
You may be able to eliminate clicks and pops by updating the driver for the display adaptor installed in your
computer.
Have you set the system’s “Performance” setting? (Windows)
You may be able to solve the problem by changing the “Performance” setting of the system.
“System “Performance” settings (Windows)” (p. 59)
Could other software programs be running?
Close software that you’re not using.
If the window of a Windows program has been closed but it is still shown in the taskbar, that program is still running.
Close all unneeded software that’s shown in the taskbar.
Have you tried Windows Update or Microsoft Update? (Windows)
Try using Windows Update or Microsoft Update (provided by the Microsoft Corporation) to update your system to
the latest version.
Try disabling the LAN
In your computer’s Device Manager, try disabling LAN (wired/wireless).
If this eliminates the clicks and pops, it may be that updating your LAN driver or BIOS may solve the problem. Check
whether updated software is available.
Could you have connected the A-500S to a USB hub?
Try connecting the A-500S directly to a USB connector on your computer.
Are you using the included USB cable?
You must use the included USB cable when using the A-500S. Some commercially available USB cables do not meet
the requirements of the USB standard, and this may prevent the A-500S from operating correctly.
Could you have updated the Mac OS X software while A-500S was connected?
It has been found that clicks or pops can occur if you performed a Mac OS X software update while the A-500S was
connected. If so, install the driver once again.
Problems when playing
The display indicates “Lo”
Playback contains clicks, dropouts, or other problems
66

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Roland A-500S wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Roland A-500S

Roland A-500S Bedienungsanleitung - Holländisch - 80 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info