Bedienungsanleitung Roland A-800PRO (Seite 38 von 96) (Englisch)

481050

Zoom out

Zoom in

Vorherige Seite

1/96

Nächste Seite

Using A-PRO Editor

System Ex.

Assign a system exclusive message (System Ex.).

You can enter up to twenty-four bytes.

fig.editor-sysex.eps

Specify the following parameters.

Table 1: Special characters used in the message entry field

Table 2: Types of data you can specify in the Data Type field

Item Content

Message entry field

You can enter a system exclusive message of up to twenty-four bytes.

Enter each byte as a hexadecimal value separated by a single-byte space.

The following limitations apply to the input.

* The message must begin with “F0” and end with “F7.”

* You cannot include more than one exclusive message.

* You cannot include messages other than an exclusive message.

You can enter variable data or a checksum using the special characters

described in “Table 1: Special characters used in the message entry field”

(p. 38). If you use the special character “DT,” use the Data Type field to

specify the type of data.

Data Type

If you’ve used the special character “DT” in the message entry field, use

this to specify the type of data to be inserted at that location. For the

types of data that can be specified, refer to “Table 2: Types of data you

can specify in the Data Type field” (p. 38).

Min Value Lower limit of the data value

Max Value Upper limit of the data value

Special

character

Explanation Details

DT Data insertion location The data specified by Data Type will be inserted.

Beginning of checksum

calculation

If you use the automatic checksum calculation function, use

this special character to specify the point at which check-

sum calculation is to begin.

S1/S2

Checksum insertion

location and type

If you use the automatic checksum calculation function, use

this special character to specify the point at which the

checksum is to be inserted, and its type.

S1: The most common type, used by Roland and other man-

ufacturers.

S2: Choose this if a method other than S1 is used.

Channel (? is any value

between 0–7)

If you want a channel number to be inserted in the exclusive

message, use this special character to specify its location

and the upper four bits (a fixed value of 0–7). The current

channel of the A-PRO will be inserted in the channel section.

Block number (? is any

value between 0–7)

If you want a GS block number to be inserted in the exclu-

sive message, use this special character to specify its loca-

tion and the upper four bits (a fixed value of 0–7). The

current channel of the A-PRO will converted into the block

number and inserted.

Data type Data length Target of the specified Min Value / Max Value

DT0: 7-bit 1 byte Specifies a range from 0 to 127 (0–127)

DT1: 4-bit/4-bit 2 bytes

Specifies the range of the first byte (0–15)

* The second byte is fixed at 0–15

DT2: 7-bit/7-bit

(MSB/LSB)

2 bytes

Specifies the range of the MSB (0–127)

* The LSB is fixed at 0–127

DT3: 7-bit/7-bit

(LSB/MSB)

2 bytes

Specifies the range of the MSB (0–127)

* The LSB is fixed at 0–127

DT4: 4-bit/

4-bit/4-bit/4-bit

4 bytes

Specifies the range of change (0–255) between the negative di-

rection (Min) and the positive direction (Max), centered on 8000h.

Example of input

1. Enter the following in the message entry field.

F0 41 10 42 12 SS 40 1X 32 DT S1 F7

In the Data Type field, choose “DT0.” Specify the

Min Value as “0” and the Max Value as “127.”

F0 41 10 42 12 SS 40 1x 32 DATA SUM F7

Block number 1 byte

Address Data

ChecksumChecksum calculation range

A-300_500_800C_e.book 38 ページ２０１４年８月１９日　火曜日　午後３時２７分

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Roland A-800PRO Seite 38

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Roland A-800PRO

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info