481050
87
Zoom out
Zoom in
Vorherige Seite
1/96
Nächste Seite
87
Controlling SONAR or SONAR LE from the A-PRO Series
The A-PRO series is compatible with SONAR or software in the SONAR LE series
(hereafter collectively referred to simply as “SONAR”).
After installing the A-PRO control surface plug-in, youll be able to use a keyboard from
the A-PRO series for controlling SONAR, using the ACT function.
SONAR X1 or later/SONAR LE
When you install SONAR X1 or SONAR X1 LE, the A-PRO control surface plug-in is
installed together with it.
SONAR 8.5 or earlier
1 Insert the supplied A-PRO CD-ROM into the CD drive.
2 Open the folder A-PRO_CSP on the A-PRO CD-ROM, then double-
click “Setup.exe.”
3 Follow the instructions presented by the installer to perform the
installation.
When the following two conditions are applicable, make sure that you select
“32-bit Version” in the “Choose version” dialog box.
64-bit OS installed
SONAR LE or SONAR 32-bit version installed
1 Launch SONAR.
2 Access the control surface screen.
SONAR X1 or later/SONAR LE
From the SONAR menu, click [Edit] - [Preferences]; then from the menu at left, click
the control surface.
SONAR 8.5 or earlier
From SONAR’s menus, click [Options] - [Controllers/Surfaces].
3 Click [ ].
4 Make the following settings in the dialog box that appears, then
click [OK].
The [ACT] button on the A-PRO keyboard will light, and communication between
the A-PRO keyboard and SONAR will begin.
5 Close the dialog box.
Once you’ve made these settings, the A-PRO instrument and SONAR will
communicate with each other each time you open a project. Please be aware that
such communications can take a considerable amount of time; however, this
does not indicate a malfunction.
Installation Procedure
Making the Settings for SONAR
Parameter Setting
Controller/Surface A-PRO
Input Port A-PRO 2
Output Port A-PRO
A-300_500_800C_e.book 87 ページ 2014年8月19日 火曜日 午後3時27分
87

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Roland A-800PRO wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Roland A-800PRO

Roland A-800PRO Bedienungsanleitung - Deutsch - 96 seiten

Roland A-800PRO Bedienungsanleitung - Holländisch - 92 seiten

Roland A-800PRO Bedienungsanleitung - Französisch - 96 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info