527325
48
Zoom out
Zoom in
Vorherige Seite
1/64
Nächste Seite
48
If you experience problems, read this chapter rst. It contains tips for solving most problems. If
this chapter cannot help you solve a problem, please refer to the support section of our website. If
the problem is not resolved, refer to the contact information listed at the end of this manual.
Roland support website: http://www.roland.com/
Problems When Installing the Driver
Problem Conrmation Resolution
Installer does not
start
Are you attempting to install from a
networked DVD-ROM drive?
Put the CD-ROM to DVD-ROM drive connected to
your computer, and install.
Cannot install
Are you logged on with a user account
that does not have administrator
privileges?
Log on to the computer with a user account that
has administrator privileges.
For details, consult the administrator for your
computer system.
Windows XP
Is the “Driver Signing Options setting set
to [Block]?
Change the “Driver Signing Options setting (p. 52).
Are other programs or resident programs
(such as antivirus programs) running?
Be sure to exit all other programs before
installation.
Windows
Warning or error
appears during
installation
In the “Device Manager, do you see “Other
device, “Unknown device, or a device for
which “?, “!, or “x is displayed?
Reinstall the driver (p. 54).
Installer does not
exit
Is your computer running on battery
power?
Connect the power cord to the computer.
Other than a mouse and keyboard, are
any USB devices connected?
Make sure that there are no USB devices
connected to the computer (other than a mouse
and keyboard) during installation.
Is the unit connected to a USB hub that is
not connected to a power supply?
Use a USB hub that connects to a power supply.
Windows XP
“Found New
Hardware Wizard”
appears again
after driver was
installed
Did you connect the unit to a dierent
USB connector than the one you used
when installing the driver?
If you change the USB connector to which the unit
is connected, the “Found New Hardware Wizard”
may appear again even if the driver has already
been installed on the computer.
Follow step 10 of the driver installation procedure
(p. 19) and install the driver.
Windows 8/
Windows 7/
Windows Vista
Numeral such as
“2-” appears at
the beginning of a
device name
Did you connect the unit to a dierent
USB connector than the one you used
when installing the driver?
If you connect the unit to a dierent USB
connector than the one you used when installing
the driver, a numeral may appear with the device
name.
To have the device name appear without the
numeral, connect the unit to the same USB
connector used during installation, or reinstall the
driver (p. 54).
Troubleshooting
48

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Roland A-88 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Roland A-88

Roland A-88 Bedienungsanleitung - Holländisch - 64 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info