Bedienungsanleitung Roland AC-33 (Seite 10 von 116) (Deutsch, Englisch, Holländisch, Französisch, Italienisch, Portugiesisch, Spanisch)

481061

Zoom out

Zoom in

Vorherige Seite

1/116

Nächste Seite

Names of Things and What They Do

Control Panel

INPUT Jack

Connect your microphone or line-level device here

(p. 6).

* The AC-33 provides a balanced (XLR) connector that

is wired as follows. Check the wiring of your device

before you connect it.

* Phantom power

is not supplied.

1: GND2: HOT

3: COLD

[VOLUME] Knob

This knob adjusts the volume of the mic/line channel

(p. 6).

If you’re using a microphone, set this to the MIC

position.

[BASS] Knob

This adjusts the tonal character of the low-frequency

range (p. 6).

[TREBLE] Knob

This adjusts the tonal character of the high-

frequency range (p. 6).

[CHORUS] Switch

This switches the type of chorus that is applied (p. 7).

MIC/LINE CHANNEL

[ANTI-FEEDBACK] Switch

You can prevent acoustic feedback by turning

this on (p. 11).

Settings will be made automatically when you

turn the switch on.

The settings will be reset when the AC-33’s power

is turned on again.

REC Indicator

This will light red during recording.

PLAY Indicator

This will light green during playback.

OVERDUB Indicator

This will light yellow during overdubbing.

[REC/PLAY/OVERDUB] Button

Press this button when you want to record, play, or

overdub.

[STOP/CLEAR] Button

Press this button to stop the looper or to erase the

recording.

LOOPER

This function allows you to record a phrase and play it back repeatedly (p. 10).

The recorded phrase will be lost when you turn o the power.

[REVERB/AMBIENCE] Knob

This adjusts the amount of reverb or ambience

(p. 7).

[MASTER] Knob

This adjusts the overall volume (p. 5, p. 6).

This knob does not aect LINE OUT.

PHONES Jack

You can connect headphones here (p. 6).

* If headphones are connected, the AC-33’s

speakers will not produce sound.

43 5

INPUT Jack

Connect your guitar here (p. 5).

[VOLUME] Knob

This adjusts the volume of the guitar channel (p. 5).

[BASS] Knob

This adjusts the tonal character of the low-frequency

range (p. 5).

[MIDDLE] Knob

This adjusts the tonal character of the mid-frequency

range (p. 5).

[TREBLE] Knob

This adjusts the tonal character of the high-

frequency range (p. 5).

[CHORUS] Switch

This switches the type of chorus that is applied (p. 7).

GUITAR CHANNEL

POWER Indicator

This will light if the power is on.

* The POWER indicator will become dim when the

batteries run low. If the batteries become even

lower, the POWER indicator will blink.

Please replace the spent batteries with fresh

ones.

[POWER] Switch

This turns the power on/o (p. 5).

* Due to a circuitry-protection feature, the AC-33 requires a few moments after it has been turned on before it

is ready for normal operation.

* If you need to turn o the power completely, use this switch to turn o the AC-33’s power, then disconnect

the plug from the AC outlet. For details, refer to “Connecting the Power” (p. 4).

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Roland AC-33 Seite 10

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Roland AC-33

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info