Bedienungsanleitung Roland AC-33 (Seite 13 von 116) (Deutsch, Englisch, Holländisch, Französisch, Italienisch, Portugiesisch, Spanisch)

481061

Zoom out

Zoom in

Vorherige Seite

1/116

Nächste Seite

Português Italiano DeutschNederlands Español Français

English

Erasing the phrase

1. Hold down the [STOP/CLEAR] button for two or more

seconds.

The REC indicator will blink, and the phrase will be

erased.

NOTE

The erased phrase cannot be recovered.

* Recording, duplication, distribution, sale, lease, performance, or broadcast

of copyrighted material (musical works, visual works, broadcasts, live

performances, etc.) belonging to a third party in part or in whole without the

permission of the copyright owner is forbidden by law.

* Do not use this unit for purposes that could infringe on a copyright held by

a third party. We assume no responsibility whatsoever with regard to any

infringements of third-party copyrights arising through your use of this unit.

Using a foot switch

By using momentary-type foot switches (BOSS FS-5U or FS-6; sold

separately) you can operate the Looper’s [REC/PLAY/OVERDUB] button

and [STOP/CLEAR] button with your foot.

REC/PLAY/OVER-

DUB button

REC/PLAY/OVER-

DUB button

STOP/CLEAR

button

STOP/CLEAR

button

PCS-31

White

(TIP)

Red

(RING)

BOSS FS-5U

PCS-33

BOSS FS-6

• If you’ve used a cable with a phone plug (mono) to connect only one

foot switch, the foot switch will operate only the [REC/PLAY/OVERDUB]

button.

For details on foot switch polarity settings, refer to p. 9.

Anti Feedback Function

Anti Feedback function

What is acoustic feedback?

This is an unpleasant oscillation (a whine, buzz, or howl) that occurs

when the output from a speaker is re-input to a microphone or pickup,

amplied, and output again from the speaker.

This is more likely to occur when you point the microphone at a

speaker or raise the volume to a high level.

Sound continues

cycling, causing

feedback

Using the Anti Feedback function

What is the anti-feedback function?

This function suppresses the acoustic feedback that can occur

between a guitar or microphone and the amp. It does this by attenuat-

ing the sound in the frequency range at which feedback is occurring.

Feedback will be suppressed automatically when you use the

anti-feedback function.

1. Turn the [ANTI-FEEDBACK] switch ON.

The anti-feedback function will be applied to the

microphone or guitar connected to the GUITAR

CHANNEL and MIC/LINE CHANNEL inputs.

MEMO

In order to prevent feedback from occurring during your performance,

we recommend that you turn the anti-feedback function on before

you begin performing.

NOTE

The anti-feedback function will be reset when you turn the power o,

then on again.

* If the anti-feedback function is not enough to suppress feedback,

take the following steps

• Change the direction of the guitar or microphone

• Move the guitar or microphone away from the speakers

• Lower the volume

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Roland AC-33 Seite 13

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Roland AC-33

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info