Bedienungsanleitung Roland AC-60 (Seite 9 von 20) (Englisch)

481062

Zoom out

Zoom in

Vorherige Seite

1/20

Nächste Seite

Names of Things and What They Do

RICH

This is a stereo chorus that is divided into three frequency

ranges.

Here, the effect is separated into three bands, low-frequency,

midrange, and high-frequency, and by applying the most

suitable amount of chorus effect in each range, it provides a

sense of fullness and breadth that is perfectly suited to the

acoustic guitar.

The low end is firmly in the center, and sound spreads out

more and more as the sound rises from the midrange up

through the higher frequencies.

WIDE

While also relying on the division of sound into separate

bands, this chorus offers even greater expansiveness than

RICH.

The sound image spreads beyond the AC-60’s speakers,

producing an effect that seems to envelope the listener in

sound.

12. REVERB/DELAY knob

You can adjust this knob to switch between the reverb and

delay effects.

You can adjust the amount of effect applied by changing the

position of the knob.

* Turn the knob to “OFF” if you are not using the reverb or

delay effect.

* The markings indicating the reverb and delay positions are

approximate. Listen to the sound to confirm the effect as you

make adjustments.

REVERB

This stereo reverb, developed especially for acoustic

instruments, gives a sense of spaciousness and natural sonic

quality.

Turn the knob to adjust the volume of the reverb effect.

DELAY

This delay, developed especially for acoustic instruments,

adds soft reflections to the original sound.

Turn the knob to change the delay time.

* You can use a foot switch (the optional BOSS FS-5U) to

switch the reverb and delay on and off.

13. FREQUENCY knob

This selects the frequency at which the anti-feedback

function operates.

Use the knob to switch between automatic and manual

settings for the operational frequency. (p. 10)

fig.031

* Turn the knob to “OFF” if you are not using anti-feedback.

14. START button

This starts automatic detection of the feedback point.

The indicators show the operating status of the automatic

detection function.

Standby: Flashes slowly

During Detection: Flashes rapidly

After Detection: Remains lit

* Holding down the START button for one second or longer

puts automatic detection in standby.

ANTI-FEEDBACK

fig.32

Anti-feedback is a function that controls feedback that arises

between the guitar or mic and the amp.

The feedback is suppressed by attenuating the frequency at

which the feedback occurs.

* This is not designed to work with respect to the high-frequency

feedback that can occur when using microphones.

Anti-feedback can be used in two different ways; you can make

use of either the “Auto settings” or the “Manual settings.”

Feedback

This is a phenomenon where signals output from the

speakers are then picked up again by the mic or pickup, and

the sound is further amplified and output from the speakers,

resulting in an unpleasant oscillating sound.

* If the anti-feedback alone does not control the feedback, adjust

your settings, for example by lowering the volume or cutting

the low frequencies.

MANUAL

AC-60_e.book 9 ページ２００６年９月８日　金曜日　午後２時２１分

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Roland AC-60 Seite 9

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Roland AC-60

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info