Bedienungsanleitung Roland AC-90 (Seite 13 von 80) (Deutsch, Englisch, Holländisch, Französisch, Italienisch, Portugiesisch, Spanisch)

481063

Zoom out

Zoom in

Vorherige Seite

1/80

Nächste Seite

Español Italiano Français Deutsch EnglishPortuguêsNederlands

Names of Things and What They Do

the MUTE button.

If devices are connected to both the RCA phono jacks and the

1/4” phone jacks, the two inputs are mixed.

4. DI OUT/TUNER OUT Jack

The direct sound of the device or instrument connected to the

GUITAR or MIC/LINE channel is output here. This is a 1/4”

phone TRS jack with balanced output.

You can also use this jack to connect a tuner.

fig.070

* If balanced output is not required, use a 1/4” phone (mono)

plug to connect to this jack.

If balanced output is not required, you can use the special

connection cable (the optional PCS-31) to use the DI OUT and

TUNER OUT simultaneously.

fig.080

A phase-inverted signal is output from the COLD side (the

red side of the PCS-31). Connect the recording device to the

HOT side (the white side of the PCS-31)

5. FOOT SW Jacks

The AC-90 accepts the BOSS FS-5L (latch type), BOSS FS-5U

(momentary type), and BOSS FS-6 foot switch pedals.

* Set the polarity switch as shown below.

fig.071

(MUTE, ANTI-FEEDBACK)

Connecting a foot switch pedal (optional BOSS FS-5L, FS-5U,

or FS-6) using a connection cable (the optional PCS-31) makes

it possible to use a latch-type foot switch (the FS-5L or FS-6)

to switch muting on and off, or to use a momentary-type foot

switch (the FS-5U or FS-6) to control the anti-feedback

feature.

* For information on the settings for the FS-6, refer to the

owner’s manual for the FS-6.

fig.050

When a 1/4” phone (mono) plug is used to connect only one

foot switch, only the Mute on/off function is enabled. In such

cases, you should use a latch-type foot switch pedal (such as

the BOSS FS-5L)

* The MUTE button should be set to off when a foot switch is

connected for muting.

You cannot switch the muting off by pressing the foot switch

when the MUTE button is on (when the MUTE indicator is

lit).

* When using an FS-5U (momentary type) to switch muting on

and off, the muting is switched on only while the switch is held

down.

For anti-feedback, a foot switch will function as follows:

• When the FREQUENCY knob is positioned in the range

from L to H, the switch turns the anti-feedback function

on and off.

• When the FREQUENCY knob is positioned at AUTO, the

switch functions as the START switch for the automatic

detection. Holding the foot switch down for one second

or longer returns the automatic detection function to

standby mode.

(CHORUS, DELAY/REVERB)

Using a special connection cable (the optional PCS-31) to

connect two foot switches (the optional BOSS FS-5U), you

can use one FS-5U to switch the chorus on and off, and use

the other FS-5U to switch the delay or reverb on and off.

fig.060

When a 1/4” phone (mono) plug is used to connect only one

foot switch, only the chorus on/off function is enabled.

* The chorus on/off function works on both channels.

* You cannot switch the chorus on and off by pressing the foot

switch when the CHORUS button is off.

Tuner

White Red

PCS-31

Recoreder

AC-90_egfispd.book Page 13 Tuesday, May 15, 2007 2:37 PM

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Roland AC-90 Seite 13

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info