Bedienungsanleitung Roland Aerophone AE-10 (Seite 7 von 22) (Englisch)

708864

Zoom out

Zoom in

Vorherige Seite

1/22

Nächste Seite

Menu Settings

Menu List

: Tone Setting S: System Setting

Menu Value Default Explanation

Volume

0–10 8

Adjusting the Volume

You generally adjust the volume by the strength of your breath when performing, but you can also set the volume in the

menu. This changes the volume of the speaker and the PHONES/OUTPUT jack.

M.Tuning

415.3–466.2 (Hz) 440.0

Changing the Master Tuning

Changes the tuning of the Aerophone.

The displayed value is the frequency of the A key. With the factory settings, the Aerophone’s tuning is set to A=440.0 Hz, but

you can change this to some other tuning such as 442.0 Hz.

Breath

L3, L2, L1, M, H1,

H2, H3

Adjusting the Breath Sensitivity

Species how the sound responds to the force of your breath.

L3, L2, L1 Fortissimo () can be produced even by blowing relatively softly.

M This setting is the closest to the response of an actual wind instrument.

H1, H2, H3 Fortissimo () is produced only when you blow quite strongly.

Breath force

Level

Tone Vol

0–10 10

Tone volume

Species the volume of each tone.

Transpos

-5–+6

Depends

on the

tone

Changing the Key (Transpose)

Transposes the pitch range of the tone in semitone steps.

-5 -4 -3 -2 -1 0 +1 +2 +3 +4 +5 +6

If this is set to “0,” the “C” ngering in the “Fingering Chart” at the end of this manual produces the pitch C.

The alto saxophone whose base key is “E

” is set to a transpose setting of “+3,” and the soprano saxophone whose base key is

“B

” is set to “-2.”

Octave

-3–+3

Depends

on the

tone

Octave Shift Setting

Shifts the pitch range of the tone in one-octave steps.

The octave shift value is set appropriately for each tone so that it will have the appropriate pitch range. For example, this is set

to “0” for the soprano saxophone, “-1” for the alto saxophone, and “-2” for the baritone saxophone.

Reverb

0–10

Depends

on the

tone

Reverb Setting

Adjusts the depth of reverb (the reverberation that is characteristic of a performance in a concert hall).

Higher values produce deeper reverberation; lower values produce shallower reverberation.

Chorus

0–10

Depends

on the

tone

Chorus Setting

Adjusts the depth of the chorus eect.

Chorus is an eect that creates a beautiful spaciousness and depth by adding a slightly modulated sound.

MFX1

MFX2

Depends on the

tone

Depends

on the

tone

Multi-Eect Setting

Species the depth of the eect that’s assigned to each tone.

* The eect type is set for each tone; it cannot be selected on the Aerophone.

For details on the eect signal ow, refer to “Eect Flow” at the end of this manual.

Multi-Eect List

MFX TYPE Display

EQUALIZER EQ

LOW BOOST LOW

ENHANCER EH

AUTO WAH WAH

HUMANIZER HMN

PHASER PH

RING MUDULATOR RNG

TREMOLO TRM

AUTO PAN PAN

ROTARY RTR

FLANGER FL

SPACE-D SPC

MFX TYPE Display

OVERDRIVE OD

DISTORTION DS

COMPRESSOR CMP

LIMITER LM

GATE GAT

DELAY DLY

LONG DELAY LDL

3TAP PAN DELAY 3DL

TELEPHONE TEL

PITCH SHIFTER PS

GATED REVERB GRV

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Roland Aerophone AE-10 Seite 7

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Roland Aerophone AE-10

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info