Bedienungsanleitung Roland AT 45 (Seite 188 von 228) (Englisch)

527353

188

Zoom out

Zoom in

Vorherige Seite

1/228

Nächste Seite

188

Troubleshooting

If the AT-45 does not function in the way you except, first check the following chart. If this does not

resolve the problem, consult your dealer or a nearby Roland Service Station.

Problem Check Solution Page

When you press the [Power

On] switch, the power doesn’t

come on.

Power cord is not connected

correctly.

Connect the power cord correctly.

p. 17

No sound is heard.

The [Master Volume] knob is set too

low.

Turn the [Master Volume] knob

toward “Max.”

p. 17

Headphones are connected.

When you connect the headphones,

the sound is heard only through the

headphones.

If you want sound to be output from

the speakers, disconnect the

headphones.

p. 18

The plug is still plugged into the

headphone jack.

Disconnect the plug from the

headphone jack.

p. 18

The volume is set too low on the

Level [

▲

] [

▼

] buttons.

Press the Level [

▲

][

▼

] buttons to

raise the volume.

p. 44

The volume is set too low on the

Expression Pedal.

Advance the expression pedal.

p. 107

You do not have a Voice selected.

Voices that have their button

indicator lit can be played.

Press a voice button to select a voice.

p. 34

No sound is heard.

(by the Lower keyboard)

Drums/SFX are selected for the

Lower keyboard, but you are

playing a key to which no drum

sound is assigned.

Turn the Drums/SFX off or play

keys to which drums sounds are

assigned.

p. 48

No sound is heard (when a

MIDI instrument is

connected).

The power of the connected external

devices is not turned on.

Use the correct procedure to turn on

the power of the connected external

devices.

p. 185

–

p. 187

Damper Pedal does not

operate.

The damper pedal affects only the

Lower keyboard and Upper

keyboard. The damper pedal does

not affect the Bass pedalboard.

You can change the settings so that

the damper pedal affects the Upper

keyboard.

p. 171

The damper pedal does not affect the

Solo voice.

This is not a malfunction.

- - -

Expression Pedal does not

operate.

The function of the Expression Pedal

during recording or the function

during playback has been set to

“COMPOSER.”

Set the expression pedal function

during recording to “PEDAL,” and

during playback to “PEDAL” or

“PEDAL+COMPOSER.”

p. 170

Can’t use the function

assigned to the foot switch.

If “Regist Shift” (change

Registrations) is “RIGHT,” “LEFT,”

or “RIGHT + Load Next,” the foot

switch will be dedicated to switching

the Registration.

Turn “Regist Shift” off.

p. 106

When the human voice “Jazz

Scat” is selected, playing

dynamics do not change the

sound.

The setting of “Initial Touch” is

turned OFF.

Turn “Initial Touch” on.

p. 169

AT-45_e.book 188 ページ２００５年２月２１日　月曜日　午後５時４３分

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Roland AT 45 Seite 188

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Roland AT 45

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info