Bedienungsanleitung Roland AT-500 (Seite 245 von 272) (Englisch)

708882

245

Zoom out

Zoom in

Vorherige Seite

1/272

Nächste Seite

243

Troubleshooting

Appendices

Problems with the Sound

Problem

Check Solution Page

Noise is heard in the sound

If there is a cell phone nearby, you

may hear noise from the ATELIER when

an incoming call or outgoing call

occurs, or during a conversation.

Keep the phone as far away as possible,

or turn off its power.

- - -

When the human voice “Jazz Scat”

is selected, playing dynamics do

not change the sound

“Initial Touch” is set to “OFF.”

Set “Initial Touch” to “ON.”

p. 198

When you release your fingers

from keys in the Lower keyboard,

the notes continue sounding

The Lower Voice Hold is at ON.

Turn “Lower Voice Hold” off.

p. 70

Sound is produced when you take

your finger off a key

You have selected a “Marimba Treml”

or “Banjo Treml” sound.

If you select a “Marimba Treml” or

“Banjo Treml” sound, a sound will also

be produced when you take your

finger off the key.

This is not a malfunction.

- - -

Some keys (of certain keyboard

parts) sound strange

You are playing notes outside the

recommended range of the voice.

This is not a malfunction.

- - -

Bass is heard even though you are

not playing the Bass Pedalboard

The Pedal [To Lower] button or the Bass

Split is at “ON.”

When the Pedal [To Lower] button is

ON, the Bass will be sounded by the

Lower keyboard.

In the Pedal part, press the Pedal [To

Lower] button or set “Bass Split” to

“OFF.”

p. 149

p. 152

When playing the same sound in

the Upper keyboard and Lower

keyboard, the volume is different

The “Initial Touch” setting is different

between the upper keyboard and

lower keyboard.

Set “Initial Touch” to the same setting for

both the upper keyboard and lower

keyboard.

p. 198

The sound is not played correctly

If you layer the same type of sound (for

example, Strings 1 and Strings 5), or

play an octave-shifted organ sound,

the timing at which you play a note or

the phase relationship between the two

sounds may affect the way in which the

sounds are heard, but this is not a

malfunction.

You are layering sounds of the same type

(e.g., Strings 1 and Strings 5).

Alternatively, you are playing an organ

sound with Octave Shift.

This is not a malfunction.

- - -

Even though you press only one

key, a multiple number of notes

sound

Harmony Intelligence is at ON.

Set “Harmony Intelligence” to “OFF.”

p. 125

Chord Intelligence is set to “ON.”

Set “Chord Intelligence” to “OFF.”

p. 80

Pitch is off

Transpose is in effect.

Simultaneously press the Transpose [-] [+]

buttons to cancel the transposition (the

Transpose [-][+] buttons’ indicators will

go out).

p. 117

The tuning is incorrect.

Adjust the standard pitch.

p. 210

While set for an octave shift, you are

playing keys beyond the

recommended range. This does not

indicate a malfunction.

Adjust the Octave Shift setting.

p. 64

Rotary effect is not be applied

Some sounds do not allow the rotary

effect to be applied.

This is not a malfunction.

- - -

AT-500_e.book 243 ページ２００８年７月２８日　月曜日　午後４時１７分

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Roland AT-500 Seite 245

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Roland AT-500

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info