Bedienungsanleitung Roland AT 900C (Seite 110 von 308) (Englisch)

527370

110

Zoom out

Zoom in

Vorherige Seite

1/308

Nächste Seite

108

Using the Registration Buttons

The ATELIER allows you to store sound settings and panel settings in the

Registration buttons.

The ATELIER has a total of twelve Registration buttons, and one set of panel

settings can be registered to each button, for a total of twelve types of panel

settings. Each set of panel settings that has been stored in a Registration button

is called a “Registration.”

This provides a convenient way to change large numbers of panel settings

during a performance, or to recall a complex panel setting.

fig.03-01.eps

About the Registration Buttons

In addition to assigning voices and Rhythms to the Registration buttons, you

can also store the following settings:

• Panel button settings (for example, settings for the Level [

▲

] [

▼

] buttons

and Solo [To Lower] button, etc.)

• Controller settings (functions assigned to foot switches, pitch bend range,

etc.)

• Other types of settings (reverb type, tempo settings, degree of initial

touch, etc.)

If you would like to know all of the settings that can be recorded to the

Registration buttons, refer to “Settings That Are Stored In the Individual

Registration Buttons” (p. 286).

The twelve settings stored at the Registration buttons can be saved as a “set”

in USB memory, a floppy disk, or User memory (p. 115).

In addition to the settings saved to the Registration buttons, the following data

is also saved when Registration sets are saved.

• Registration Name

→

p. 113

• Registration Shift

→

p. 137

• Arranger Update

→

p. 111

• Trans. Update (Transpose Update)

→

p. 219

• Exp. Curve (Expression Curve)

→

p. 139

• Rhythm Mode setting

→

p. 217

Settings that have been stored

to Registration buttons [1]–[12]

are remembered even if the

power is turned off. If you wish

to restore the settings stored in

the Registration buttons to their

factory settings, use the

“Factory Reset” operation (p.

27).

Recorded performance data

and Rhythms from User memory

(p. 84) are not stored in

Registration sets.

When a Rhythm saved in User

memory is assigned to a

Registration set, that Rhythm is

copied beforehand to the User

memory.

With the factory settings, the Arranger Update setting is set to “DELAYED.”

If Arranger Update is set to “DELAYED,” you will need to hold down the

Registration button for several seconds in order to recall the tempo and

Rhythm settings.

If you want the tempo and Rhythm settings to be recalled instantly when

you press a Registration button, change the Arranger Update setting to

”INSTANT.” For details, refer to “Recalling a Registration” (p. 110)

AT-900_e.book 108 ページ２００８年９月１６日　火曜日　午前１０時３８分

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Roland AT 900C Seite 110

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Roland AT 900C

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info