Bedienungsanleitung Roland AT-90SL (Seite 218 von 266) (Englisch)

708897

218

Zoom out

Zoom in

Vorherige Seite

1/266

Nächste Seite

217

Troubleshooting

The Bass Range Sounds Odd,

or There Is a Vibrating

Resonance.

Playing at loud volumes may cause

instruments near the AT-90SL to

resonate. Resonance can also occur

with fluorescent light tubes, glass

doors, and other objects. In

particular, this problem occurs more

easily when the bass component is

increased, and when the sound is

played at higher volumes.

Use the following measures to

suppress such resonance.

• Place speakers so they are 10-15

cm from walls and other surfaces.

• Reduce the volume.

• Move the speakers away from any

resonating objects.

- - -

When listening through

headphones:

Here, a different cause (such as

resonance produced by the AT-

90SL) would be suspect.

Consult your Roland dealer or

nearest Roland Service Center.

- - -

The volume level of the

instrument connected to AT-

90SL is too low.

Could you be using a connection

cable that contains a resistor?

Use a connection cable that does not

contain a resistor.

p. 205

Pressing the expression

pedal while playing back

Atelier performance data

produces a crackling noise

The expression pedal function is set

to “PEDAL+COMPOSER” during

playback of Atelier performance

data.

When this setting is used, moving

the expression pedal while playing

back Atelier performance data may

create a difference between the

expression pedal information in the

performance data and the volume as

set with the expression pedal, which

can result in this kind of sound being

produced.

Set the expression pedal function to

“PEDAL” during playback.

p. 188

Tempo not changing even

when the source tempo is

reselected (when arranging

rhythms using the Rhythm

Customize function).

Auto Std Tempo (Auto Standard

Tempo) is set to on.

When the Auto Std Tempo setting is

set to ON and rhythms are switched

while the rhythm is stopped, the

tempo is automatically set to the

tempo for that rhythm.

The tempo setting does not change

automatically, even if the rhythms

are switched with the Auto Std

Tempo setting set to OFF and the

rhythm stopped.

Turn “Auto Std Tempo” off.

p. 190

Unable to save created

rhythm to the User Memory

“Memory Full” appears in the

display.

The available memory remaining in

the AT-90SL is not sufficient.

First delete some other rhythm

saved to the user memory, then save

the rhythm you have created to the

user memory once again.

p. 183

p. 184

There is no sound from the

twelve keys at the right of the

lower keyboard.

The V-LINK function is set Mode 2.

When V-LINK setting is Mode 2, the

group of twelve keys starting at the

very right of the lower keyboard are

used for controlling video images.

Therefore, no sounds are played

even when you press these keys.

Turn the V-LINK function off, or

select Mode 1 for the V-LINK

function.

p. 202

Problem Check Solution Page

AT-90SL_e.book 217 ページ２００４年９月８日　水曜日　午後５時４４分

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Roland AT-90SL Seite 218

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Roland AT-90SL

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info