Bedienungsanleitung Roland AT100 (Seite 130 von 148) (Englisch)

527335

130

Zoom out

Zoom in

Vorherige Seite

1/148

Nächste Seite

128

Troubleshooting

Lower keyboard cannot be heard

The Lower keyboard will not produce

sound while an Intro or Ending is being

played.

This is not a malfunction.

- - -

The sound is not played correctly

If you layer the same type of sound (for

example, Strings 1 and Strings 5), or

play an octave-shifted organ sound,

the timing at which you play a note or

the phase relationship between the two

sounds may affect the way in which the

sounds are heard, but this is not a

malfunction.

You are layering sounds of the same

type (e.g., Strings 1 and Strings 5).

Alternatively, you are playing an

organ sound with Octave Shift.

This is not a malfunction.

- - -

Can’t hear the 1’ harmonic bar

Percussion [2 2/3’] button is turned

on.

If Percussion [2 2/3’] button is on, the

sound of the 1’ harmonic bar will not

be heard

This is not a malfunction.

- - -

Lyrics are not indicated properly

in the display

With some music files, the lyrics cannot

be displayed correctly.

This is not a malfunction.

- - -

A button was pressed while the lyrics

were being shown in the display.

During the display of lyrics, you could

be taken to a different screen if you

press a button.

If you want to have the lyrics be

displayed again, Press the [Rec] button

p. 92

Certain instrument is not heard

while playing a song

The track is muted.

Turn off track muting.

p. 91

p. 113

Can’t use Chord Intelligence

function

Chord Intelligence is at OFF.

Turn “Chord Intelligence” on.

p. 48

The Bass Range Sounds Odd, or

There Is a Vibrating Resonance

When listening through speakers:

Playing at loud volumes may cause

instruments near the ATELIER to

resonate. Resonance can also occur

with fluorescent light tubes, glass

doors, and other objects. In particular,

this problem occurs more easily when

the bass component is increased, and

when the sound is played at higher

volumes.

Use the following measures to suppress

such resonance.

• Place speakers so they are 10-15 cm

from walls and other surfaces.

• Reduce the volume.

• Move the speakers away from any

resonating objects.

- - -

When listening through headphones:

Here, a different cause (such as

resonance produced by the ATELIER)

would be suspect.

Consult your Roland dealer or nearest

Roland Service Center.

- - -

Pressing the expression pedal

while playing back ATELIER

performance data produces a

crackling noise

The expression pedal function is set to

“PEDAL+COMPOSER” during

playback of ATELIER performance

data.

When this setting is used, moving the

expression pedal while playing back

ATELIER performance data may create

a difference between the expression

pedal information in the performance

data and the volume as set with the

expression pedal, which can result in

this kind of sound being produced.

Set the expression pedal function to

“PEDAL” during playback.

p. 107

Problem Check Solution Page

AT-100-300_e.book 128 ページ２００８年５月７日　水曜日　午後３時３３分

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Roland AT100 Seite 130

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Roland AT100

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info