527334
72
Zoom out
Zoom in
Vorherige Seite
1/148
Nächste Seite
70
Using the Performance Functions
You can use the Foot Switch as a dedicated switch for
selecting Registrations in order. The registration will be
switched each time you press the foot switch.
The Registration Shift settings are stored to each
individual Registration Set. When “RIGHT + Load
Next” is assigned to the foot switch and the Load
Next function is used to switch Registration Sets saved
to a USB memory or floppy disk, set the Registration
Shift setting to “RIGHT + Load Next” for all saved
Registrations.
1.
Press the [Utility] button.
2.
Press the Menu [ ] and [ ] buttons to
select “Registration Shift.”
3.
Press the Value [-] and [+] buttons to change
the setting (OFF/RIGHT/LEFT/RIGHT + Load
Next).
What is “Load Next”?
You can use the Load Next function to call up Registrations in
the order saved to the USB memory, user memory, or floppy
disk. When you will be performing live, you can save
registration sets to USB memory, user memory, or floppy disk
in the order in which you will be performing. Then while you
perform, you can recall the next registration set easily and
smoothly.
To return to the basic screen, press the [Utility] button.
This setting remains stored in memory even while the
power is turned off.
Using the Foot Switch to Switch
Registrations (Registration Shift)
Setting Descriptions
OFF
You can use a function assigned to the foot
switch.
RIGHT
The right foot switch is dedicated to switching
registrations.
The function assigned to the right foot switch
cannot be used.
LEFT
The left foot switch is dedicated to switching
registrations.
The function assigned to the left foot switch
cannot be used.
NOTE
RIGHT +
Load Next
The right foot switch is dedicated to switching
registrations. The function assigned to the right
foot switch cannot be used.
Selecting the Registration [8] button and
pressing the right foot switch activates the Load
Next function, calling up the next registration
saved to the USB memory, user memory, or
floppy disk. The Registration Load window
appears in the display. When you then press
the right foot switch again, the Registration Set
is confirmed, and the Registration [1] button is
selected.
Example:
1
2
3...
8
Load Next
(Next Registration) 1
Setting
Descriptions
AT-100-300_e.book 70 ページ 2008年5月7日 水曜日 午後3時33分
72

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Roland AT300 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Roland AT300

Roland AT300 Bedienungsanleitung - Holländisch - 144 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info