527334
94
Zoom out
Zoom in
Vorherige Seite
1/148
Nächste Seite
92
Record and Playback Your Performance
Caution
If you press the [Rec] button when a song has been selected
from the USB memory or floppy disk, the selected song will be
completely loaded into the ATELIER and the Composer will
enter into the recording standby mode. To record a new song,
use the following procedure.
ig.07-12-2.eps
1.
Press the [Rec] button to cancel recording
standby.
2.
Disconnect the external media.
If you’ve connected USB memory, disconnect the USB
memory from the external memory connector. If you’re
using a floppy disk, remove the floppy disk from the disk
drive.
3.
Delete the performance data (p. 94).
Re-record your performance.
f
If the following screen appears
fig.E-30.eps
When recording was automatically canceled because
the memory limit was reached.
Here’s how to play back a performance you’ve recorded.
fig.08-06
1.
Press the [Reset] button.
The location at which playback will start will return to the
beginning of the first measure (bar).
If you wish to begin playback from the middle of the
song, press the [Bwd] button or [Fwd] button to move to
the measure from which you wish to begin playback.
2.
Press the [Play/Stop] button to start playback.
After playback reaches the end of the performance, it
will stop automatically.
3.
To stop playback at any point, press the [Play/
Stop] button.
The [Play/Stop] function can be assigned to the foot switch
(p. 69).
You can specify whether or not the Expression Pedal will
affect the playback and what you play while Atelier music
data is being played back (p. 107).
If you use the Rhythm or Automatic Accompaniment
immediately after having loaded and played back a song
other than an Atelier performance song, such as SMF’s, etc.,
the playback may not sound right (the voices may have
changed, etc.) To prevent this from happening, press the
[Reset] button before playback.
Playing Back a Performance
Song
1 2,3
AT-100-300_e.book 92 ページ 2008年5月7日 水曜日 午後3時33分
94

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Roland AT300 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Roland AT300

Roland AT300 Bedienungsanleitung - Holländisch - 144 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info