Bedienungsanleitung Roland BK-5 (Seite 13 von 160) (Englisch)

708951

Zoom out

Zoom in

Vorherige Seite

1/160

Nächste Seite

Front panel

Backing Keyboard BK-5

If the button’s indicator doesn’t light, the rhythm,

Songs and the 3 real-time parts use their normal

pitch.

Pressing and holding this button locks the key (see

p. 60).

TRACK MUTE/CENTER CANCEL button

This button lets you mute the accompaniment parts

of the selected rhythm, so that only the bass and

drum parts are played back. It also lets you mute the

melody part of the selected MIDI File, or attenuate

the vocal part at the center of an audio file (WAV or

mp3), allowing you to sing or play that part yourself.

Pressing and holding this button calls up a display

page where you can select the Standard MIDI File or

rhythm part(s) that you don’t want to hear.

USB MEMORY button

Press this button to call up a list of the files stored on

the USB memory connected to the BK-5‘s USB MEM-

ORY port.

USB MEMORY port

Connect an optional USB memory here.

Note: Roland does not recommend using USB hubs, irre-

spective of whether they are active or passive. Please con-

nect only one USB memory to this port.

NOTE

Use USB memory sold by Roland. We cannot guarantee

operation if any another USB memory is used.

MENU button

This button allows you to open the BK-5’s menu page

where you can view and select all available functions.

Press it together with the [EXIT] button to listen to

the BK-5’s demo songs.

EXIT button

This button is used to return to a higher menu level.

Press and hold it to return to the BK-5’s main display

page.

SPLIT button

This button is used to activate Split mode. While its

indicator lights, notes played to the left of the C4 on

an keyboard trigger the LWR part. Notes to the right

of the split point, on the other hand, trigger the UP1

and UP2 parts. See “Using Split mode” on p. 46.

PART LWR and UP2 buttons

These buttons are used to switch the real-time parts

(Lower and Upper2) on and off.

NOTE

The Upper1 part (UP1) is always active and cannot be

switched off.

ONE TOUCH button

This button is used to enable the recall of One Touch

memories. Pressing and holding it calls up a display

page where you can edit and save One Touch memo-

ries.

NOTE

Use the TONE buttons [1]~[4] to select or deselect a One

Touch memory (see p. 34).

MELODY INTELL button

This buttons is used to add an automatic counter-

melody (second or third voice) to your solos or melo-

dies. Pressing and holding it calls up a display page

where you can view the “Melody Intelligent” parame-

ter.

NUMERIC button

Press this button if you want to use the TONE buttons

f to enter numeric values (see p. 26).

TONE buttons (Tone selection)/[0]~[9] (numeric but-

tons)

These buttons allow you to select Tones by category

(page 25).

You can also use them to input numeric values. To do

so, first activate the NUMERIC button e.

Pressing and holding any of these buttons locks the

Tone (page 60).

BK-5_US.book Page 13 Thursday, May 23, 2013 7:01 PM

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Roland BK-5 Seite 13

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Roland BK-5

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info