Bedienungsanleitung Roland BK-5 (Seite 26 von 160) (Englisch)

708951

Zoom out

Zoom in

Vorherige Seite

1/160

Nächste Seite

Playing the BK-5’s real-time parts

Backing Keyboard BK-5

The numeric field is displayed in reverse.

Rotate the dial to select the desired Tone.

If necessary, use the TONE buttons to select a differ-

ent family.

The display now shows a page similar to the follow-

ing:

You can also use the “Numeric” function (see below)

to select the desired Tone. In that case, you need to

confirm your selection by pressing the BK-5 button.

Pressing the same TONE button several times allows

you to select the first sound of the various categories

within that family (“NaturalPiano”‰ “Vintage EP1”‰

“Clav-1”…).

Press [EXIT] to leave the Tone selection

page.

The display returns to the main page where the name

of the newly selected Tone is shown.

On the main page, you can also use the “Numeric”

function to select Tones. The procedure is as follows:

(a) Use the [CURSOR÷VALUE] dial to select the numeric

field of the part you wish to assign a different Tone

to.

(b) Press the [NUMERIC] button (a pop-up window is dis-

played).

Tone you want to use.

(d) Press the [ENTER/SELECT] button to confirm.

NOTE

You can also select the BK-5’s Tones via MIDI. Be aware,

however, that if the BK-5 receives a sound select cluster

(bank select + program change message) for which there is

no Tone, the display shows “---” instead of a Tone name

and the real-time part in question no longer sounds.

Using the ‘Numeric’ function to select Tones,

Rhythms and Performances

The “Numeric” function can be used to enter the number

of the Tone, Rhythm or Performance memory you want

to use, which is faster than scrolling with the

[CURSOR÷VALUE] dial.

This function is automatically activated when you call

up a display or mode where using it makes sense. Below

please find an example that shows you how to use the

“Numeric” function for selecting Tones.

NOTE

For Tone selection, it would be a good idea to check on the

main page which real-time part is currently selected to ensure

that you don’t select a Tone for the wrong part.

To select a different Tone for the Upper2 or Lower part, you

can simply press and hold the [UP2] and [LWR] button while

using the following procedure.

In the following example, we will assign a different

sound to the Upper1 part.

Press the button of the Tone family that

contains the Tone you want to select

([PIANO/E.PIANO], for example).

NOTE

By pressing and holding one of these buttons, you activate

the lock function for Tone selection, which means that

Tones no longer change when you select Performance

memories (page 60).

The display changes to:

BK-5_US.book Page 26 Thursday, May 23, 2013 7:01 PM

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Roland BK-5 Seite 26

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Roland BK-5

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info