Bedienungsanleitung Roland BK-5 (Seite 50 von 160) (Englisch)

708951

Zoom out

Zoom in

Vorherige Seite

1/160

Nächste Seite

Performance Lists

Backing Keyboard

BK-5

The TONE [1]~[8] buttons flash. To the left of each

memory entry, a number is shown. This number cor-

responds to the TONE button [1]~[8] that you need to

press to recall the assigned Performance memory.

NOTE

Please bear in mind that these assignments change when

you edit the Performance List in question using “Delete

Performance” on p. 53, “Move Performance” on p. 53 or

“Copy Performance” on p. 54.

The TONE [0] and [9] buttons, on the other hand, light

steadily because they are used to scroll through the

list in steps of 8 memories. Pressing [9] while the

above page is shown, for instance, will display Perfor-

mance memories 9~16, which are again assigned to

the TONE [1]~[8] buttons. See the screenshot below.

Press the TONE [1]~[8] button that is

assigned to the Performance memory you

need.

The assigned Performance memory is recalled and

shown in reverse in the display.

Press the TONE [9] button to select the next

group of eight performances.

Alternatively, press the TONE [0] button to

select the previous group of eight perfor-

mances.

The display shows either the next (TONE [9]) or the

previous (TONE [0]) set of 8 Performance memories.

In the example above we pressed the TONE [9] but-

ton.

Repeat the steps (3) and (4) above to recall

other Performance memories when you need

them.

Press and hold the [NUMERIC] button again

to exit this selection function.

Press the [EXIT] button to leave the list page without

exiting this selection system. To return to this page

(e.g. to select another Performance memory), press

the PERFORMANCE [LIST] button.

Saving your settings as a

Performance

Select a rhythm or song.

Select all settings you would like to use for

this rhythm or song.

You can, for instance, assign the desired Tones to the

real-time parts, switch on the [INTRO] button, modify

the “Performance Edit” settings, etc.

Press the [WRITE] button to jump to the

“Write Performance” page.

The [WRITE] indicator flashes and the display changes

to:

By default, the BK-5 assigns the name of the selected

rhythm, song or of the last Performance you loaded

to the Performance settings you are about to save. If

you agree with that name, proceed with step (7)

below.

Rotate the [CURSOR

VALUE] dial to select

the desired position.

Use the TONE buttons to enter the desired

characters.

Repeat steps (4) and (5) to enter the

remaining characters.

NOTE

You can press the [NUMERIC] button to switch between

upper- and lower-case characters as well as numbers. The

[LWR] button can be used to delete the selected character.

The [UP2] button allows you to insert a character.

Press the [WRITE] button to save your set-

tings, thereby creating a new Performance

memory.

Assigned to the 8 entries shown in the display

Previous group of 8 Performance memories (if available)

Next group of 8 Performance memories (if available)

Different

memories.

BK-5_2.fm Page 50 Monday, May 27, 2013 8:24 PM

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Roland BK-5 Seite 50

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Roland BK-5

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info