Bedienungsanleitung Roland BK-5 (Seite 70 von 160) (Englisch)

708951

Zoom out

Zoom in

Vorherige Seite

1/160

Nächste Seite

Menu options

Backing Keyboard BK-5

Tempo Change Accel/Ritard, CPT, Fill Rit

The “Termpo Change Acceler/Ritard” parameter

allows you to speed up or slow down the rhythm

tempo by the amount you set here. To use these

functions, you must assign them to an optional foot-

switch (see p. 76).

There are three Ritardando functions: one for all

rhythm patterns, one for Ending patterns and one for

fill-ins (see “Fill Ritardando” above). They all use the

“Tempo Change” settings on the following page.

Tempo Change Accel/Ritard: Allows you to set the

degree (ratio) by which the tempo changes when the

“Acceler” or “Ritard” function is triggered. Example: if

the tempo is currently q= 100, the value “20%”

means that the tempo drops to q= 80 or rises to q=

120.

Tempo Change CPT: Use this parameter to specify

how long a ritardando/accelerando should take. In

most cases, 480 CPT (i.e. one measure) is probably the

most musical choice.

Tempo Change Fill Rit: This parameter allows you to

specify to what extent fill-in playback should be

slowed down when the “Fill Ritardando” function is

on.

■ Using the Ritardando/Accelerando functions

For general applications (any rhythm division) pro-

ceed as follows:

•Assign the “Arr Rit” or “Arr Acc” function to an

optional footswitch (see p. 76).

•Press the [START/STOP] button to start rhythm play-

back.

•Press the assigned footswitch.

For ritardandos that apply to Ending patterns pro-

ceed as follows:

•Press the [START/STOP] button to start playback.

•Press the [ENDING] button twice in succession (“dou-

ble-click”).

‘Melody Intelligent’ parameters

This function group can be selected using [MENU] but-

ton ‰ “Performance Edit” ‰ “Melody Intelligent” or by

pressing and holding the [MELODY INTELL] button.

The following parameters are available:

Switch

Select “On” if you want to add a MELODY INTELL part.

This part is triggered by the chord recognition of the

BK-5’s Arranger and plays automatic harmonies that

are added to the melody that you are playing using

the UP1 part. You can choose from among 18 har-

mony types (see below).

NOTE

This “Switch” parameter can also be assigned to an optional

footswitch (see p. 75).

Type

Allows you to select one of the 18 harmony types:

2nd Tone

Depending on the selected “Type” setting, a second

harmony is added to the “Melody Intelligent” part. If

you like, you can select the desired Tone for the sec-

ond harmony voice using this parameter.

Intell Threshold

This value represents the lowest velocity value

(between “0” and “127”) of the UP1 part that triggers

the “Melody Intelligent” part. If you don’t need this

switching function, select “0”.

Parameter Setting

Tempo Change Accel/Ritard 5%~92%

Tempo Change CPT 0~3825

Tempo Change Fill Rit 5%~92%

Parameter Setting

Switch Off, On

Parameter Setting

Type 1:Duet, 2:Organ 3:Combo, 4:Strings,

5:Choir, 6:Block, 7:Big Band, 8:Country,

9:Traditional, 10:Brodway, 11:Gospel,

12:Romance, 13:Latin, 14:Country Guitar,

15:Country Ballad, 16:Waltz Organ,

17:Octave Type1, 18:Octave Type2

Parameter Setting

2nd The Tone of the selected family.

Parameter Setting

Intell Threshold 0~127

BK-5_US.book Page 70 Thursday, May 23, 2013 7:01 PM

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Roland BK-5 Seite 70

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Roland BK-5

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info