Bedienungsanleitung Roland BK-5 (Seite 96 von 160) (Englisch)

708951

Zoom out

Zoom in

Vorherige Seite

1/160

Nächste Seite

Menu options

Backing Keyboard BK-5

Press the [WRITE] button (its indicator flashes) to

confirm your settings and edit the data.

■ Delete

Unlike the “Erase” function, “Delete” not only erases

the data but also the measures, beats and/or CPT

units, so that all data that lie behind the “To” position

are shifted towards the beginning of the track(s). You

cannot choose the data type to be erased.

Press the [WRITE] button (its indicator flashes) to

confirm your settings and edit the data.

To Bar 1~[last mea-

sure of the

track or pat-

tern]

This is where you spec-

ify the last measure to

be edited. By default,

the “To” position is set

to the last event of the

selected track (or the

last event of the long-

est track when you

select “All”).

To Beat 1~[number of

beats per bar]

Specifies the beat posi-

tion. The number of

selectable beats

depends on the

selected time signa-

ture.

To CPT 0~119 Refers to the last clock

that should be affected

by the edit operation.

Change this setting

only if your edit opera-

tion should not end

exactly on the selected

beat.

Data Type

(select the data

to be edited)

ALL All parameters listed

below.

Note Only note messages.

Modulation CC01 messages usu-

ally used for adding

vibrato (i.e. use of the

BENDER/MODULA-

TION lever).

PanPot CC10 messages that

specify the stereo posi-

tion.

Expression CC11 messages that

are used for tempo-

rary volume changes.

Reverb Reverb Send messages

(how strongly the part

should be processed by

the reverb effect).

Chorus Chorus Send messages

(how strongly the part

should be processed by

the chorus effect).

Program

Change

Program change mes-

sages, used to select

sounds or Drum Sets.

Note: by deleting pro-

gram change messages

you also dispose of the

related CC00 and CC32

(bank select) messages.

P.Bender: Pitch Bend data (i.e.

use of the BENDER/

MODULATION lever).

Parameter Setting Explanation

From Note 0 C-~127 G9 This parameter is only

displayed if “Data

Type” (see above) is set

to “Note”. It allows you

to set the note (or

lower limit of the note

range) to be modified

within the specified

“From/To” time range.

To Note 0 C-~127 G9 This parameter allows

you to set the upper

limit of the note range

to be modified within

the specified “From/To”

time range.

Parameter Setting Explanation

Track ADrums~Acc6,

ALL

Allows you to select

the track you wish to

edit. Select “ALL” to

edit all tracks.

Mode Major, Minor,

7th

Allows you to select

the Mode to be edited.

Division Intro 1~4,

Main 1~4, Fill

Dwn 1~3, Fill

Up 1~3, End

1~4

Use this parameter to

select the Division you

want to edit.

From Bar~

To CPT

See page 94.

Parameter Setting Explanation

BK-5_US.book Page 96 Thursday, May 23, 2013 7:01 PM

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Roland BK-5 Seite 96

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Roland BK-5

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info