Bedienungsanleitung Roland BK-9 (Seite 14 von 180) (Englisch)

527392

Zoom out

Zoom in

Vorherige Seite

1/180

Nächste Seite

4. Panel Description

Left Front Panel

PHONES output

This is where you can connect optional headphones (Roland RH-

series).

Pitch Bend/Modulation lever

You can lower or raise the pitch by moving this lever to the left

or right. Push the lever away from yourself to apply modulation

(normally vibrato) to the sound.

S1, S2, S3, S4 (Assignable Switches)

These are assignable buttons. You can use them to directly access

frequently used functions that are only available via the function

menu. The button assignments belong to the settings that can be

written to a Performance. For more details see p. 53.

VOLUME knob

Use this knob to set BK-9’s global output volume (all signals

transmitted to the OUTPUT jack).

AUDIO IN knob

This knob allows you to set the input level of the signals received

via the INPUT jack.

MIC VOLUME knob

This knob controls the level of the microphone connected to the

MIC IN jack.

BALANCE knob

These knob allows you to set the balance between the rhythms

and songs (BACKING) and the real-time parts (PARTS).

MIC REVERB knob

This knob sets the level of the reverb eect, that is added to the

MIC signal.

D-BEAM Controller (Sensor and buttons)

The D-BEAM Controller allows you to control various aspects of

your performance. See “Using the D-BEAM Controller” (p. 53).

METRONOME button

Press this button to switch the internal metronome on or o.

RHYTHM FAMILY buttons

These buttons are used to select the family of the next rhythm

you want to use. Pressing one of these buttons calls up a list of all

rhythms contained in the selected family. Pressing and holding this

button locks the currently selected rhythm (p. 63).

TEMPO buttons

These buttons can be used to decrease or increase the tempo of

the currently selected rhythm or song. Pressing them together

recalls the stored tempo value of the rhythm or song.

MEMO

You can also use the [TAP TEMPO] button to set the desired tempo

SYNC START button

This button is used to switch the BK-9’s Sync Start or Sync Stop

function either on or o. If it is on, rhythm playback can be either

started or stopped by simply playing a note or chord on the

keyboard. (p. 36).

While a song le is selected, this button stops playback.

CHORD LOOP buttons

These buttons are used to record and play a sequence of chords

for instant use. See “19. Recording a Chord Sequence (Chord

Loop)” (p. 79).

SONG REC button

This button is used to start recording of your performance (p.

75).

BASS INV button

This button is used to switch the Bass Inversion function on and o

(p. 37).

TAP TEMPO button

Pressing this button several times allows you to change the current

rhythm or song tempo to the value calculated from the speed at

which the button is pressed.

5 6

7 8

12 13

14 15 16 17 18 19 20 21 22

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Roland BK-9 Seite 14

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Roland BK-9

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info