Bedienungsanleitung Roland BK-9 (Seite 20 von 180) (Englisch)

527392

Zoom out

Zoom in

Vorherige Seite

1/180

Nächste Seite

Connecting the AC Adaptor

1. Turn the [VOLUME] knob all the way to the left to

minimize the volume.

2. Connect the included power cord to the AC adapter.

The indicator will light once you plug the AC adaptor into a wall

outlet.

Place the AC adapter so that the side with the indicator (see

illustration) faces upwards and the side with textual information

faces downwards.

NOTE

Depending on your region, the included power cord may dier

from the one shown above.

3. Connect the AC adaptor to BK-9’s DC IN jack.

4. Plug the power cord into a power outlet.

The indicator will light once you plug the AC adaptor into a wall

outlet

NOTE

Be sure to use only the AC adaptor supplied with the unit

(PSB-1U). Also, make sure the line voltage at the installation

matches the input voltage specied on the AC adapter body.

Other AC adapters may use a dierent polarity, or be designed

for a dierent voltage, so their use could result in damage,

malfunction, or electric shock.

NOTE

If you won’t be using the BK-9 for an extended period of time,

disconnect the power cord from the electrical outlet.

Ground Terminal

Depending on the circumstances of a particular setup, you may

experience a discomforting sensation, or perceive that the surface

feels gritty to the touch when you touch this device, microphones

connected to it, or the metal portions of other objects, such as guitars.

This is due to an innitesimal electrical charge, which is absolutely

harmless. However, if you are concerned about this, connect the

ground terminal (see gure below) with an external ground. When the

AC Adapter

Power cord

to an AC outlet

Indicator

unit is grounded, a slight hum may occur, depending on the particulars

of your installation. If you are unsure of the connection method,

contact the nearest Roland Service Center, or an authorized Roland

distributor, as listed on the “Information” page.

Unsuitable places for connection

• Water pipes (may result in shock or electrocution)

• Gas pipes (may result in re or explosion)

• Telephone-line ground or lightning rod (may be dangerous in

the event of lightning)

Connecting External Audio Equipment

You can connect the OUTPUT jack to keyboard amplier, stereo

system, or other stereo audio device.

1. Turn the [VOLUME] knob all the way to the left to

minimize the volume.

2. Connect the BK-9’s OUTPUT jacks to the inputs of your

external audio device.

INPUT

L R

3. You can connect the outputs of an external signal source

to the BK-9’s INPUT jacks.

4. Use the BK-9s [AUDIO IN] knob to adjust the volume.

NOTE

• To prevent malfunction and equipment failure, always turn

down the volume and turn o all units before making any

connections.

6. Before You Start Using BK-9

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Roland BK-9 Seite 20

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Roland BK-9

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info