Bedienungsanleitung Roland BK-9 (Seite 167 von 180) (Englisch)

527392

167

Zoom out

Zoom in

Vorherige Seite

1/180

Nächste Seite

Connecting in Ad-Hoc mode

167

Symptom Action Page

Lyric display is wrong.

For some types of music les, the lyrics may sometimes be displayed incorrectly. Some words may be

incorrectly shown outside the screen display area.

Insucient volume from a device connected to the

BK-9’s INPUT jack.

Could you be using a connection cable that contains a built-in resistor? Use a connection cable that

does not contain a resistor.

Could the [AUDIO IN] knob be turned down? Select a higher setting. -

• Is the [TRACK MUTE] (CENTER CANCEL) button active? (its indicator lights).

Press the [TRACK MUTE] (CENTER CANCEL) button to make its indicator go dark.

The songs won’t play.

The le type of the song is not one of the le types that the BK-9 can play. 44

It may be that the song data is damaged. -

A “Frame Oset Sync Error” message appears.

If you use forward and rewind ([ENDING] / [& ] and [INTRO] / [‘ ] buttons) during a playback of mp3

le with a variable bit rate (VBR), this message could appear. It’s a temporary synchronization failure.

You don’t need to take any action.

No Performance Lists are displayed.

The USB memory doesn’t contain any Performance List les. -

For some reason the USB memory is not recognized.

Use (optional) Roland USB memory (M-UF series).

Can’t connect to a wireless LAN access point.

• Make sure that your wireless LAN access point supports WPS.

If your wireless LAN access point does not support WPS, you can connect using the procedure

described in “Connecting to a Wireless LAN Access Point That You Select” (p. 163).

• Have you entered the correct password in the iPhone or other wireless device?

Disconnect and reconnect the wireless device and then enter the right BK-9 Ad-Hoc Key. (For

example, on an iPhone, to disconnect, choose [Settings] g [Wi-Fi], press the arrow icon on the

right of the network name and then press “Forget this Network”.

• The 802.11a/b wireless standard is not supported. Please use the 802.11g/n (2.4 GHz) wireless

standard.

• The WEP authentication method is not supported. Please use the WPA or WPA2 authentication

method.

• Make sure that DHCP is enabled for your wireless LAN access point.

• If you don’t get connected to the previously-connected wireless LAN access point when you turn

on the power, check and make sure the setting described in “Connecting in Ad-Hoc mode” (p.

164) is OFF.

• There is a limit to the connection data that can be remembered. Making a new connection may

cause older connection data to be deleted.

• All connection data will be deleted if you execute a factory reset.

• If the connection data has been deleted, please re-connect to the wireless LAN access point.

The display indicates “Access Point Not Supported,”

and can’t connect to the wireless LAN access point.

• This Access Point is not supported. Please use the WPA or WPA2 authentication method. -

Communication is unstable.

Communication may be unstable depending on the usage of the radio frequency spectrum.

If communication is unstable, the response may be sluggish, or if using audio communication, there

may be dropouts in the audio.

The following actions may improve the situation.

• Move the wireless LAN access point and the BK-9 closer to each other.

• Change the channel setting of the wireless LAN access point.

The BK-9 is not found in the instrument connections

of the app (such as the iPhone app Air Recorder).

• Is the BK-9 powered up?

• Is the wireless USB adapter (WNA1100-RL) inserted to the BK-9?

• Is the BK-9 connected to the wireless LAN?

• Are the BK-9 and the iPhone connected to the same network (the same wireless LAN access

point)?

• Is the wireless LAN access point set to allow communication between wireless LAN devices?

For details on settings, refer to the owner’s manual of your wireless LAN access point.

Your iPhone or iPod touch won’t connect to the

Internet.

• Is the wireless LAN access point connected to the Internet?

• Could you be connected in Ad-Hoc mode?

The iPod touch or other wireless device connected in Ad-Hoc mode will be unable to

communicate with the Internet or with another wireless device. However, an iPhone or other

wireless device that has cellular capability will be able to connect to the Internet via the cellular

connection. Please be aware that if you use a cellular connection for Internet connectivity, you

may incur costs depending on your rate plan.

A wireless device such as an iPod touch that does not have cellular capability will become unable

to connect to the Internet in this case.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Roland BK-9 Seite 167

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Roland BK-9

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info