Bedienungsanleitung Roland Blues Cube Tour (Seite 5 von 19) (Englisch)

708971

Zoom out

Zoom in

Vorherige Seite

1/19

Nächste Seite

Deutsch

Français Italiano Español PortuguêsEnglish Nederlands

English

IMPORTANT NOTES

CAUTION

Place in a well ventilated location

The unit should be located so that its

location or position does not interfere with

its proper ventilation.

When disconnecting the power cord, grasp it by the

plug

To prevent conductor damage, always

grasp the power cord by its plug when

disconnecting it from this unit or from a

power outlet.

Periodically clean the power plug

An accumulation of dust or foreign objects

between the power plug and the power

outlet can lead to re or electric shock.

At regular intervals, be sure to pull out the

power plug, and using a dry cloth, wipe away any dust

or foreign objects that may have accumulated.

CAUTION

Disconnect the power plug whenever the unit will

not be used for an extended period of time

Fire may result in the unlikely event that a

breakdown occurs.

Route all power cords and cables in such a way as

to prevent them from getting entangled

Injury could result if someone were to

trip on a cable and cause the unit to fall

or topple.

Avoid climbing on top of the unit, or placing heavy

objects on it

Otherwise, you risk injury as the result of

the unit toppling over or dropping down.

CAUTION

Never connect/disconnect a power plug if your

hands are wet

Otherwise, you could receive an electric

shock.

Disconnect all cords/cables before moving the unit

Before moving the unit, disconnect the

power plug from the outlet, and pull out all

cords from external devices.

Before cleaning the unit, disconnect the power

plug from the outlet

If the power plug is not removed from the

outlet, you risk receiving an electric shock.

Whenever there is a threat of lightning, disconnect

the power plug from the outlet

If the power plug is not removed from the

outlet, you risk receiving an electric shock.

IMPORTANT NOTES

Power Supply

• Do not connect this unit to same electrical outlet that is

being used by an electrical appliance that is controlled

by an inverter or a motor (such as a refrigerator,

washing machine, microwave oven, or air conditioner).

Depending on the way in which the electrical appliance

is used, power supply noise may cause this unit to

malfunction or may produce audible noise. If it is not

practical to use a separate electrical outlet, connect

a power supply noise lter between this unit and the

electrical outlet.

Placement

• Using the unit near power ampliers (or other

equipment containing large power transformers) may

induce hum. To alleviate the problem, change the

orientation of this unit; or move it farther away from the

source of interference.

• This unit may interfere with radio and television

reception. Do not use this unit in the vicinity of such

receivers.

• Noise may be produced if wireless communications

devices, such as cell phones, are operated in the vicinity

of this unit. Such noise could occur when receiving

or initiating a call, or while conversing. Should you

experience such problems, you should relocate such

wireless devices so they are at a greater distance from

this unit, or switch them o.

• Do not expose the unit to direct sunlight, place it near

devices that radiate heat, leave it inside an enclosed

vehicle, or otherwise subject it to temperature extremes.

Also, do not allow lighting devices that normally are

used while their light source is very close to the unit

(such as a piano light), or powerful spotlights to shine

upon the same area of the unit for extended periods of

time. Excessive heat can deform or discolor the unit.

• When moved from one location to another where the

temperature and/or humidity is very dierent, water

droplets (condensation) may form inside the unit.

Damage or malfunction may result if you attempt to use

the unit in this condition. Therefore, before using the

unit, you must allow it to stand for several hours, until

the condensation has completely evaporated.

• Do not allow rubber, vinyl, or similar materials to remain

on this unit for long periods of time. Such objects can

deform or discolor the unit.

• Do not paste stickers, decals, or the like to this

instrument. Peeling such matter o the instrument may

damage the exterior nish.

• Depending on the material and temperature of the

surface on which you place the unit, its rubber feet may

discolor or mar the surface.

You can place a piece of felt or cloth under the rubber

feet to prevent this from happening. If you do so, please

make sure that the unit will not slip or move accidentally.

• Do not place containers or anything else containing

liquid on top of this unit. Also, whenever any liquid

has been spilled on the surface of this unit, be sure to

promptly wipe it away using a soft, dry cloth.

Maintenance

• To clean the unit, use a dry, soft cloth; or one that is

slightly dampened. Try to wipe the entire surface using

an equal amount of strength. Rubbing too hard in the

same area can damage the nish.

• Never use benzine, thinners, alcohol or solvents of any

kind, to avoid the possibility of discoloration and/or

deformation.

Additional Precautions

• Use a reasonable amount of care when using the unit’s

buttons, sliders, or other controls; and when using

its jacks and connectors. Rough handling can lead to

malfunctions.

• When disconnecting all cables, grasp the connector

itself—never pull on the cable. This way you will avoid

causing shorts, or damage to the cable’s internal

elements.

• A small amount of heat will radiate from the unit during

normal operation.

• To avoid disturbing others nearby, try to keep the unit’s

volume at reasonable levels.

• When you need to transport the unit, pack it in shock-

absorbent material. Transporting the unit without doing

so can cause it to become scratched or damaged, and

could lead to malfunction.

Intellectual Property Right

• Company names and product names appearing in this

document are registered trademarks or trademarks of

their respective owners.

• Roland, BOSS, and CUBE are either registered trademarks

or trademarks of Roland Corporation in the United States

and/or other countries.

• MMP (Moore Microprocessor Portfolio) refers to a patent

portfolio concerned with microprocessor architecture,

which was developed by Technology Properties Limited

(TPL). Roland has licensed this technology from the TPL

Group.

• ASIO is a trademark and software of Steinberg Media

Technologies GmbH.

• This product contains eCROS integrated software

platform of eSOL Co.,Ltd. eCROS is a trademark of eSOL

Co., Ltd. in Japan.

Roland Blues Cube Tour Seite 5

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Roland Blues Cube Tour

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info