527408
117
Zoom out
Zoom in
Vorherige Seite
1/126
Nächste Seite
117
MIDI Implementation
Appendices
Universal System Exclusive Message
MIDI Time Code Commands
Full Message
Basic operation of quarter frame messages will be handled.
Status Data Bytes Status
F0H, 7FH Dev,01H, 01H, hrH, mnH, scH, frH F7H
Byte Description
F0H, 7FH Universal System Exclusive Message Realtime Header
Dev Device ID (7FH)
01H sub-ID #1 (MIDI Time Code)
01H sub-ID #2 (MIDI Full Message)
hrH Hours and Type 0 yy zzzzz
yy type
00 = 24 Frames/sec
01 = 25 Frames/sec
10 = 30 Frames/sec (Drop Format)
11 = 30 Frames/sec (Non Drop Format)
zzzzz hours (00Ð23)
mnH Minutes (00Ð59)
mnH Seconds (00Ð59)
frH Frames (00Ð29)
F7H EOX (End of Exclusive Message)
When you change the song position, the device ID will be transmitted as 7FH.
MIDI Machine Control Commands
Status Data Bytes Status
F0H 7FH, Dev, 06H, aaH, ..., bbH F7H
Byte Description
F0H Status of Exclusive Message
7FH Universal System Exclusive Message Realtime Header
Dev Device ID (7FH)
06H MMC Command Message
aaH Command
: :
bbH Command
F7H EOX (End of Exclusive Message)
* see Ô2. MIDI Machine ControlÕ section
2. MIDI Machine Control
MIDI Machine Control Command Reference
STOP (MCS)
Status Data Bytes Status
F0H 7FH, Dev, 06H, 01H F7H
Byte Description
F0H Status of Exclusive Message
7FH Universal System Exclusive Message Realtime Header
Dev Device ID (7FH)
06H MMC Command Message
01H STOP (MCS)
F7H EOX (End of Exclusive Message)
If the transport switch [STOP] was pressed, the BR-8 transmits as the device ID 7FH.
DEFERRED PLAY (MCS)
Status Data Bytes Status
F0H 7FH, Dev, 06H, 03H F7H
Byte Description
F0H Status of Exclusive Message
7FH Universal System Exclusive Message Realtime Header
Dev Device ID (7FH)
06H MMC Command Message
03H DEFERRED PLAY (MCS)
F7H EOX (End of Exclusive Message)
If the transport switch [PLAY] was pressed, the BR-8 transmits as the device ID 7FH.
RECORD STROBE
Status Data Bytes Status
F0H 7FH, Dev, 06H, 06H F7H
Byte Description
F0H Status of Exclusive Message
7FH Universal System Exclusive Message Realtime Header
Dev Device ID (7FH)
06H MMC Command Message
06H RECORD STROBE
F7H EOX (End of Exclusive Message)
If the transport switch [REC] was pressed out of the recording condition, the BR-8 transmits
as the device ID 7FH.
RECORD EXIT
Status Data Bytes Status
F0H 7FH, Dev, 06H, 07H F7H
Byte Description
F0H Status of Exclusive Message
7FH Universal System Exclusive Message Realtime Header
Dev Device ID (7FH)
06H MMC Command Message
07H RECORD EXIT
F7H EOX (End of Exclusive Message)
If the transport switch [REC] was pressed while recording, the BR-8 transmits as the device
ID 7FH.
MMC RESET
Status Data Bytes Status
F0H 7FH, Dev, 06H, 0DH F7H
Byte Description
F0H Status of Exclusive Message
7FH Universal System Exclusive Message Realtime Header
Dev Device ID (7FH)
06H MMC Command Message
0DH MMC RESET
F7H EOX (End of Exclusive Message)
When powered on the BR-8 transmits as the device ID 7FH.
117

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Roland BR-8 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info