Bedienungsanleitung Roland C-200 (Seite 32 von 52) (Englisch)

527425

Zoom out

Zoom in

Vorherige Seite

1/52

Nächste Seite

Additional Convenient Functionality <Advanced Operation>

■ Selecting a sound variation (Voice Palette)

The C-200 contains 4 different organ voices for each tilt

tab. You can specify which variation sound will be heard

when you activate a given tilt tab.

In addition, each division (PEDAL, MANUAL I and

MANUAL II) contains a tilt tab called [USER/ORCH] to

which you can assign either one of the 4 available organ

variations or one of the 8 available orchestral sounds. See

p. 45 for a complete list of the available voices. To select

a different voice for one of the tilt tabs, proceed as fol-

lows:

1. Press and hold the lower part of the tilt tab for which

you wish to select a different voice.

If you press a tilt tab other than [USER/ORCH]: After a few

seconds, the tilt tab flashes and one of the 4 pistons at the

center of the front panel lights steadily to indicate which

organ voice is currently assigned to that tilt tab. (The

other 3 pistons flash.)

If you press the [USER/ORCH] tilt tab: After a few seconds,

the tilt tab flashes and one of the 12 pistons on the front

panel lights steadily to indicate which voice is currently

assigned to that tilt tab. (The other 11 pistons flash.)

The first 4 pistons ([Function], [STOP], [PLAY/PAUSE]

and [REC]) allow you to select an organ sound. The 8

remaining pistons to the right allow you to select an

orchestral sound.

2. To choose a different voice, press the desired piston.

The piston you press lights, while the remaining pistons

flash. You can play on the keyboard to audition the voice

you selected. See p. 45 for the available sounds.

3. If you are satisfied with the newly selected voice, you

can press the lower part of the flashing tilt tab you

selected earlier.

(If you are not satisfied, you can return to the previously

selected voice by pressing the upper part of the tilt tab.)

4. Repeat steps (1)~(3) above to change the voicing of

other tilt tabs.

If you want to use the newly selected voice each time

you press this tab even after switching the C-200 off and

back on again, save your settings to the Global area (see

p. 33). Your settings can also be saved to one of the 8

memories (see p. 30).

■ Changing the volume of each Palette voice

You can also set the volume of the newly selected voice

(see above) to set the desired balance with respect to the

remaining organ voices you may be using simulta-

neously (by switching on other tilt tabs).

1. Press and hold the lower part of the tilt tab for which

you wish to change the volume setting (the tilt tab

flashes).

2. To change the volume of the currently selected voice,

rotate the [Tone] knob.

3. Press the lower part of a tilt tab that flashes.

That tilt tab now lights steadily.

The volume settings of the various voices can be stored

in the C-200’s Global area (see p. 33).

Choosing different organ voices and setting their volume (Voice Palette)

C-200_e.book Page 32 Monday, April 4, 2011 5:22 PM

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Roland C-200 Seite 32

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Roland C-200

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info