Bedienungsanleitung Roland C-330 (Seite 68 von 96) (Englisch)

527431

Zoom out

Zoom in

Vorherige Seite

1/96

Nächste Seite

Other Settings

You can use the [USER/MIDI] couplers to play “USER/MIDI Voice” (p.

80) that are not included in the sound tablets, or to play sounds on

an external MIDI sound module.

Here’s how you can assign a [USER/MIDI] coupler to play a specified

“USER/MIDI Voice” (p. 80) that is not included in the sound tablets,

allowing you to select and play it just like the other stops.

Two [USER/MIDI] couplers are provided for each division.

* For each sound assigned to a [USER/MIDI] coupler, you can adjust

parameters such as Octave, Reverb, and Brilliance, giving you more

flexibility than for the other sound tablets. For details, refer to

“USER/MIDI Voice” (p. 80).

From the main screen, press the [Select/Menu] knob.

Turn the [Select/Menu] knob to select “5 USER/MIDI

Coupler.”

fig.LCD006.eps

Press the [Select/Menu] knob to access the “USER/MIDI”

screen.

Turn the [Select/Menu] knob to move the cursor to the

top position, and then turn the [Value/Exit Menu] knob

to select the tablet that you want to assign a USER Voice.

fig.LCD072.eps

Turn the [Select/Menu] knob to select “Source/MIDI CH,”

and turn the [Value/Exit Menu] knob to select “USER.”

Turn the [Select/Menu] knob to select “Name,” and turn

the [Value/Exit Menu] knob to select a USER Voice.

For details, refer to “USER/MIDI Voice” (p. 80).

Turn the [Select/Menu] knob to select the item that you

want to set, and turn the [Value/Exit Menu] knob to

change the setting.

Settings for the USER/MIDI Couplers

Playing Sounds that are not in the Sound

Tablets (USER Sound Coupler)

If the “USER/MIDI” screen is not displayed

If “Source/MIDI CH” is not set to “USER,” the above screen won’t

appear. In such cases, you’ll need to change the setting using

the following procedure.

1. Turn the [Select/Menu] knob to select “Source/MIDI

CH.”

2. Change the setting to “USER” by turning the [Value/

Exit Menu] knob.

Indication

Tablet name

MAN-I A

MAN I (lower keyboard) [USER MIDI A] tablet

MAN-I B MAN I (lower keyboard) [USER MIDI B] tablet

MAN-II A MAN II (upper keyboard) [USER MIDI A] tablet

MAN-II B MAN II (upper keyboard) [USER MIDI B] tablet

PEDAL A PEDAL (pedalboard) [USER MIDI A] tablet

PEDAL B PEDAL (pedalboard) [USER MIDI B] tablet

Indication

Explanation Range

Volume

Specifies the volume of the sound assigned

to the [USER/MIDI] coupler.

OFF, 0–127

Octave

Specifies the octave of the sound assigned

to the [USER/MIDI] coupler.

-2–+2

Reverb

Specifies the reverb depth for the sound

assigned to the [USER/MIDI] coupler.

For organ sounds, set this “OFF.”

OFF, 0–127

Warmth

Adjusts the low-frequency tone for the

sound assigned to the [USER/MIDI]

coupler.

-10–+10

Presence

Adjust the mid-frequency tone for the

sound assigned to the [USER/MIDI]

coupler.

-10–+10

Brilliance

Adjusts the high-frequency tone for the

sound assigned to the [USER/MIDI]

coupler.

-10–+10

Velocity

Velocity value

KBD:

The keyboard’s velocity will be used

EXP:

The expression pedal’s position will be used

2–127:

The specified value will be used as the velocity

C-380_330_e.book 68 ページ２０１０年４月２８日　水曜日　午後１０時１１分

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Roland C-330 Seite 68

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Roland C-330

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info