Bedienungsanleitung Roland C-380 (Seite 83 von 96) (Englisch)

527430

Zoom out

Zoom in

Vorherige Seite

1/96

Nächste Seite

Troubleshooting

Something is wrong with the sound

General memory pistons don’t work properly

Division memory pistons don’t work properly (C-380)

Symptom

Cause Response Page

You hear noise

If there is a cell phone nearby, noise might be heard from the

C-330/C-380 when a call is made or received, or during a call.

Keep the cell phone as far away from the

C-330/C-380 as possible, or turn it off.

—

Something is wrong with the sound

when you play certain areas of the

keyboard

You’re playing outside the recommended range of pitches for

that voice.

This is not a malfunction. —

High notes are folded down by an

octave, or are not sounded.

You have exceeded the speaking range of the pipe. This is not a malfunction. —

Something is wrong with the sound You’re playing an octave-shifted organ sound.

If an organ sound is octave-shifted, the

sound may be affected by the timing at

which you play the keys or by phase

relationships, but this does not indicate

a malfunction.

p. 68

Pitch is incorrect

The pitch has been transposed. Cancel the transpose function. p. 41

Tuning is incorrect. Adjust the reference pitch. p. 40

You’ve specified an octave shift and are playing notes outside the

recommended region.

Change the octave shift setting. p. 68

Sound is distorted or crackly

The [USER/MIDI] coupler volume has been raised excessively. Lower the [USER/MIDI] coupler volume. p. 68

The reverb setting is high, and the “Room Type” setting is long.

Reduce the reverb setting, or shorten

the “Room Type” setting.

p. 34

p. 35

The overall volume is excessive.

Use the [Master Volume] knob to lower

the overall volume.

p. 24

Lower notes sound funny, or rattle

If you do not hear these problems through headphones

Performing at high volume may cause resonant vibration in the

organ itself or in objects near the organ.

Fluorescent lights or glass doors in the room may resonate. In

particular, this is more likely to occur with lower notes at higher

volume.

To reduce such resonances, try the

following steps.

• Move the organ 10–15 cm away from

the wall.

• Reduce the volume.

• Move the organ away from the

resonating objects.

—

If you hear the same problem through headphones

A different cause is likely.

Please contact your dealer or a Roland

customer service center.

—

Tremulant effect not applied

The tremulant effect will not be applied to USER orchestral

sounds selected by the [USER/MIDI] coupler settings.

This is not a malfunction. —

Symptom

Cause Response Page

Settings are not switched when you

press a general memory piston

Settings were not stored correctly at the general memory piston. Store the settings once again. p. 47

Symptom

Cause Response Page

Settings are not switched when you

press a division memory piston

Settings were not stored correctly at the division memory piston. Store the settings once again. p. 47

C-380_330_e.book 83 ページ２０１０年４月２８日　水曜日　午後１０時１１分

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Roland C-380 Seite 83

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Roland C-380

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info