Bedienungsanleitung Roland C-380 (Seite 86 von 96) (Englisch)

527430

Zoom out

Zoom in

Vorherige Seite

1/96

Nächste Seite

Glossary

Stop

Each set of organ pipes that produces a different sound is called a

stop.

Tablet

A tablet is a rectangular switch used to select a stop or coupler.

Piston

The round switches arranged below the manual keyboard are called

pistons.

Division

The basic group of sounds corresponding to each keyboard is called

a division.

Registration

A combination of settings for the stops (sounds) and couplers is

called a registration.

General memory pistons (general pistons)

These are the pistons [1]–[5] that are used to store registrations

(combinations of sounds).

Each general piston stores a combination of sounds and coupler

settings for the entire organ.

Division memory pistons (division pistons)

These are pistons [1]–[5] that store the sounds of the MAN I division

(lower keyboard) and MAN II division (upper keyboard).

Memory bank

Memory banks are storage areas that contain twenty different sets

of settings for general pistons 1–5, allowing you to use a larger

number of registrations.

Each bank, from memory bank 1 (M01) through memory bank 20

(M20) contains settings for five general memory pistons, letting you

store a total of 5 x 20 = 100 registrations.

General cancel piston (general cancel)

This is the round piston labeled [0]. It turns off all currently selected

sounds (stops), couplers, and tremulants in a single operation.

Expression pedal

Historically, this refers to a pedal that opens or closes the shutters of

a chamber containing the pipes, thus smoothly varying the volume

and tone.

You can also specify whether this pedal will control just the upper or

lower manual, or the entire organ.

MAN I & PEDAL enclosed piston

You can use the expression pedal to vary the volume or tone. A

setting screen allows you to choose the division whose volume or

tone will be affected, but the C-380 provides a MAN I & PEDAL

enclosed piston which lets you turn on/off control of the MAN I

division and PEDAL division while you play.

Shutter

This setting allows you to adjust the openness of the shutters to

specify the minimum volume that will be in effect when the

expression pedal is completely released.

USER/MIDI coupler

The USER/MIDI couplers allow you to select from a wide variety of

user sounds that are not accessible as tablet stops.

When using an external MIDI sound module, these couplers are also

used to play the external sound module.

Manual couplers

Manual couplers let you play the sound of one manual together (i.e.,

coupled) with the sound of another manual.

[II/I] couples the sounds of manual 2 (the upper keyboard) to

manual I (the lower keyboard), allowing you to play both from the

lower keyboard.

[I/P] couples the sounds of manual 1 (the lower keyboard) to the

pedalboard, allowing you to play both from the pedalboard.

Bass coupler

This causes the lowest note played on manual I (the lower keyboard)

to be sounded using the sound of the pedalboard.

When this is used, the lowest note you finger on the lower keyboard

will be played by the pedalboard sound even though you’re not

actually touching the pedalboard.

C-380_330_e.book 86 ページ２０１０年４月２８日　水曜日　午後１０時１１分

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Roland C-380 Seite 86

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Roland C-380

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info