Bedienungsanleitung Roland CD-2 (Seite 7 von 96) (Englisch)

527439

Zoom out

Zoom in

Vorherige Seite

1/96

Nächste Seite

IMPORTANT NOTES

Checking and Preparations

704

• Carefully insert the CompactFlash card all the way in—

until it is firmly in place.

fig.M512-Insert

705

• Never touch the terminals of the CompactFlash card. Also,

avoid getting the terminals dirty.

707

• This unit’s memory card slot accepts the CompactFlash

card. Microdrive storage media are not compatible.

708

• CompactFlash cards are constructed using precision

components; handle the cards carefully, paying particular

note to the following.

- To prevent damage to the cards from static electricity,

be sure to discharge any static electricity from your

own body before handling the cards.

- Do not touch or allow metal to come into contact with

the contact portion of the cards.

- Do not bend, drop, or subject cards to strong shock or

vibration.

- Do not keep cards in direct sunlight, in closed vehicles,

or other such locations (storage temperature: -25 to 85˚

C).

- Do not allow cards to become wet.

- Do not disassemble or modify the cards.

***

• Install the unit on a solid, level surface in an area free from

vibration.

***

• Never use the emergency eject hole to open the disc tray

while the this unit is operating.

***

• Remove any disc from the drive before powering up or

down.

***

• When you carry this unit, remove the disc from the

loading tray.

***

• To avoid the risk of malfunction and/or damage, insert

only discs with into the CD-R/RW drive. Never

insert any other type of disc. Avoid getting paper clips,

coins, or any other foreign objects inside the drive.

***

• DO NOT play a CD-R/RW disc (CD-R/RW disc on which

track data from a CompactFlash card has been backed up

Page 71) on a conventional audio CD player. The

resulting sound may be of a level that could cause

permanent hearing loss. Damage to speakers or other

system components may result.

***

• Don’t use unusually shaped discs, such as heart-shaped or

octagonal discs. Doing so may damage the CD-2.

• Do not bend the disc.

***

• Do not drop or stack discs.

***

• Do not place heavy objects on a disc, or subject it to strong

physical shock.

(801change)

• Hold a disc by inserting a finger in the center hole and

pressing your thumb against the outer edge. Be careful not

to get fingerprints on, or scratch the recording surface of

the disc (the green surface).

***

• Do not use in dusty areas.

***

• Do not leave the disc in direct sunlight or an enclosed

vehicle.

***

• Do not keep the disc in the CD-R/RW drive for a long

time.

***

• To protect the disc, keep it in its original case.

***

• Do not put a sticker on the label of the disc.

***

• When writing a title on the label surface of the disc, use a

soft-tipped writing implement such as a felt pen.

***

• Wipe the disc with a soft and dry cloth radially from

inside to outside. Do not wipe along circumference.

(801change)

• Keep your discs clean using a commercially available CD

cleaner. Do not use benzine, record cleaner spray or

solvents of any kind.

***

• Please read the documentation that is included with your

CD-R/RW discs.

Handling CompactFlash Cards

Handling the CD-R/RW Drive

Handling CD-R/RW Discs

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Roland CD-2 Seite 7

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Roland CD-2

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info