527442
17
Zoom out
Zoom in
Vorherige Seite
1/144
Nächste Seite
Panel Descriptions
(continued)
17
Advanced UsesRecording Listening Deleting Creating a CD Editing an SD Appendices
Convenient
Functions
Information
/ Display
Checking /
Preparations
[MIC LEVEL] Switch
This selects how the mic input level is to be
adjusted.
“Recording Acoustic Instruments or Vocals” (Page 40),
“Adjusting the Input Level Automatically (Auto Level
Function)” (Page 43)
LINE/PHONO IN Jacks
Connect an electronic piano, keyboard, cassette
deck, etc. to these jacks.
“Recording an Electronic Instrument” (Page 49),
“Recording a Cassette or MD” (Page 52)
LINE OUT Jack
Use this jack to output analog audio signals to an
external speaker system or electronic piano.
“Connecting External Speakers” (Page 126)
You can choose the audio signal that will be output
from the LINE OUT jack.
“Selecting the Audio Source that’s Sent from the LINE
OUT Jack” (Page 127)
PHONES Jack
You can connect a set of headphones to this jack.
* If headphones are connected, there will be no sound
from the speakers.
Step 4 on “Recording with the Internal Mics” (Page
40)
fig.unit03.eps
AC Adaptor Connector
Connect the dedicated AC adaptor (included) here.
“Using the Dedicated AC Adaptor” (Page 21)
Cord Hook
Use this cord hook to fasten the cord of the
dedicated AC adaptor (included) so that it doesn’t
become accidentally unplugged.
“Using the Dedicated AC Adaptor” (Page 21)
Security Slot ( )
http://www.kensington.com/
Battery Cover
“Using Batteries” (Page 23)
Battery Compartment
Install batteries here if you want to operate the
CD-2i on batteries.
If you’re using the dedicated AC adaptor, it’s not
necessary to install batteries.
“Using Batteries” (Page 23)
Switch
position
Explanation
MANUAL
The [MIC] knob will adjust the mic’s
input level.
AUTO The mic input level will be adjusted
automatically. Operating the [MIC]
knob will not affect the input level.
Rear Panel/Bottom Panel
You must turn off the power before performing the
following operations.
Switching from operation with the dedicated
AC adaptor to battery operation
Switching from battery operation to operation
with the dedicated AC adaptor
Note
CD-2i_e.book 17 ページ 2010年3月15日 月曜日 午前10時15分
17

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Roland CD-2I wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Roland CD-2I

Roland CD-2I Kurzanleitung - Englisch - 2 seiten

Roland CD-2I Kurzanleitung - Holländisch - 2 seiten

Roland CD-2I Bedienungsanleitung - Holländisch - 144 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info