Bedienungsanleitung Roland CD-2I (Seite 101 von 144) (Englisch)

527442

101

Zoom out

Zoom in

Vorherige Seite

1/144

Nächste Seite

Selecting Songs from an SD Memory Card to Create a CD

(continued)

Advanced UsesRecording Listening Deleting Creating a CD Editing an SD Appendices

Convenient

Functions

Information

/ Display

Checking /

Preparations

101

“WAV 16-bit” and “44.1 kHz” is supported

If you want to create a music CD using songs that were recorded on an R-09, you must

set the R-09’s recording mode to “WAV 16-bit” and sampling frequency to “44.1 kHz”

before you record.

Requirements for songs (files) that can be recognized

CD-2i recognizes song files that were recorded with a recording mode of “WAV 16bit”

and a sample rate of “44.1kHz,” and that meet all of the following conditions.

●

Track length must be longer than four seconds.

●

Track title must not contain double-byte characters (e.g., Japanese).

●

Track (file) must be located in the root directory of the SD memory card.

* The CD-2i is able to display and play back a maximum of 99 tracks.

* The CD-2i will not recognize the file if even one of the above conditions is not met.

File name display

fig.WriteCD03-e.eps

If the song was recorded on the Roland R-09 series,

the song name (file name) will be displayed in Step

5 of Page 97.

fig.WriteCD02-e.eps

Even if a song recorded on a device such

as the Roland R-09 series is too large to fit

on a single CD-R/RW disc, it can

automatically be divided across multiple

CD-R/RW discs.

If you want to automatically divide a large

song and write it across multiple discs,

make the following setting in Step 5 on

Page 97.

In Step 5 (Page 97), specify the large song as the “first” of the songs you want to write.

The song will be divided automatically only if the song you specify as the first song is larger than

a single CD-R/RW disc. In this case, you won’t be able to specify additional songs to be added.

After the first CD-R/RW disc has been ejected, the message “Insert Disc” will appear. Insert

another CD-R/RW disc. When the disc is detected, writing will begin automatically.

Continue inserting additional CD-R/RW discs as directed by the messages that appear.

When all the data has been written, the message “Write Completed. Another Disc?” will appear.

Continue with the procedure from Step 10 of Page 99.

* CD-R/RW discs that have no more space on them after the track has been written will be

finalized automatically. For example, if a track is divided across two discs, as in the example

shown in the illustration at the upper right, the first CD-R/RW disc will be finalized

automatically.

Making a music CD from a song recorded on a device such as the Roland R-09 series

Creating a music CD of a song that won’t fit on a single CD-R/RW disc

First CD-R/RW disc Second CD-R/RW disc

Track

Portion that does not fit

on first CD-R/RW disc

Automatically

divided

CD-2i_e.book 101 ページ２０１０年３月１５日　月曜日　午前１０時１５分

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Roland CD-2I Seite 101

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Roland CD-2I

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info