Bedienungsanleitung Roland CUBE 120XL BASS (Seite 8 von 42) (Deutsch, Englisch)

527435

Zoom out

Zoom in

Vorherige Seite

1/42

Nächste Seite

EQUALIZER

CUBE-60XL BASS

11. [BASS] Knob

Adjusts the tone quality of the lower range.

12. [MIDDLE] Knob

Adjusts the tone quality of the midrange.

15. [TREBLE] Knob

Adjusts the tone quality of the upper range.

CUBE-120XL BASS

11. [BASS] Knob

Adjusts the tone quality of the lower range.

13. [LOW-MID] Knob

Adjusts the tone quality of the lower midrange.

14. [HIGH-MID] Knob

Adjusts the tone quality of the upper midrange.

15. [TREBLE] Knob

Adjusts the tone quality of the upper range.

EFX

16. [EFX] Knob

Turn this knob to CHORUS or POLY OCTAVE

to select the corresponding eect. Turn the

knob to adjust the amount of eect applied.

The ON indicator lights up when EFX is turned on,

and goes out when EFX is turned o. You can also

turn EFX on and o using optional foot switches.

* Graduations for CHORUS and POLY OCTAVE on

a panel are for reference. Be sure to check the

sound as you adjust the eects.

Knob Position Description

CHORUS

In this eect, a slightly detuned sound is

added to the original sound, giving the

sound greater breadth and fullness.

Turning the knob to the right increases the

rate and deepens the chorus eect.

POLY OCTAVE

This adds sound lowered by an octave

to the original sound. Since you can play

chords even when using this eect, you can

use it to fatten the sound of your chordal

playing as well.

Turning the knob to the right increases the

eect sound.

DELAY/LOOPER

17. [DELAY/LOOPER] Knob

You can switch to DELAY or the LOOPER

function by positioning this knob.

When the knob is at DELAY, this functions as

a delay.

When the knob is positioned at LOOPER, this

functions as a looper.

* The scale indications for DELAY and LOOPER are just a general

guide. Be sure to check the actual sound as you adjust the eect.

The indicator lights up when DELAY or LOOPER is on and goes out

when it’s o.

To use DELAY

17. [DELAY/LOOPER] Knob

Set the knob in the position to turn DELAY on. The position of the

knob within this range adjusts the volume of the delay sound.

You can also switch DELAY on and o using an optional footswitch

pedal.

18. [REC/PLAY/DUB] Switch

This will blink in synchronization with the delay time.

19. [TAP/STOP] Switch

Use this to set the delay time. When you press the switch twice, the

delay time will be set to the time interval at which you pressed the

switch. The maximum length is 2000 ms.

Setting the Delay Time for Short Delay

If you hold down the switch for one second or longer, the delay time

will be set to 30 ms. Each time you then press the [REC/PLAY/DUB]

switch, the delay time will change over four steps (30 ms/50 ms/

70 ms/90 ms) to a maximum of 90 ms.

* The short delay cannot be set using the foot switch.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Roland CUBE 120XL BASS Seite 8

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Roland CUBE 120XL BASS

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info