Bedienungsanleitung Roland CUBE-20X (Seite 5 von 12) (Englisch)

527787

Zoom out

Zoom in

Vorherige Seite

1/12

Nächste Seite

104

• Try to prevent cords and cables from becoming

entangled. Also, all cords and cables should be

placed so they are out of the reach of children.

..........................................................................................................

106

•

Never climb on top of, nor place heavy objects on the unit.

..........................................................................................................

107a

•

Never handle the power cord or its plug with wet hands

when plugging into, or unplugging from, an outlet.

..........................................................................................................

108a

• Before moving the unit, disconnect the power

plug from the outlet, and pull out all cords from

external devices.

..........................................................................................................

109a

• Before cleaning the unit, turn off the power and

unplug the power cord from the outlet.

..........................................................................................................

110a

• Whenever you suspect the possibility of lightning

in your area, pull the plug on the power cord out

of the outlet.

..........................................................................................................

119

• The cooling vents on either side of the unit may

become hot, so take care to avoid burns.

..........................................................................................................

121

• Do not remove the speaker grille and speaker by

any means. Speaker not user replaceable. Shock

hazardous voltages and currents are present

inside the enclosure.

IMPORTANT NOTES

291b

In addition to the items listed under “IMPORTANT SAFETY INSTRUCTIONS” and “USING THE UNIT SAFELY” on pages 2,

3, 4 and 5, please read and observe the following:

Power Supply

301

• Do not connect this unit to same electrical outlet that is

being used by an electrical appliance that is controlled by an

inverter (such as a refrigerator, washing machine,

microwave oven, or air conditioner), or that contains a

motor. Depending on the way in which the electrical

appliance is used, power supply noise may cause this unit

to malfunction or may produce audible noise. If it is not

practical to use a separate electrical outlet, connect a power

supply noise filter between this unit and the electrical outlet.

307

• Before connecting this unit to other devices, turn off the

power to all units. This will help prevent malfunctions

and/or damage to speakers or other devices.

308

• Although the LEDs are switched off when the POWER

switch is switched off, this does not mean that the unit has

been completely disconnected from the source of power. If

you need to turn off the power completely, first turn off

the POWER switch, then unplug the power cord from the

power outlet. For this reason, the outlet into which you

choose to connect the power cord’s plug should be one

that is within easy reach and readily accessible.

Maintenance

401a

• For everyday cleaning wipe the unit with a soft, dry cloth

or one that has been slightly dampened with water. To

remove stubborn dirt, use a cloth impregnated with a

mild, non-abrasive detergent. Afterwards, be sure to wipe

the unit thoroughly with a soft, dry cloth.

402

• Never use benzine, thinners, alcohol or solvents of any kind,

to avoid the possibility of discoloration and/or deformation.

Additional Precautions

553

• Use a reasonable amount of care when using the unit’s

buttons, sliders, or other controls; and when using its jacks

and connectors. Rough handling can lead to malfunctions.

556

• When connecting / disconnecting all cables, grasp the

connector itself—never pull on the cable. This way you

will avoid causing shorts, or damage to the cable’s

internal elements.

557

• A small amount of heat will radiate from the unit during

normal operation.

558a

• To avoid disturbing your neighbors, try to keep the unit’s

volume at reasonable levels. You may prefer to use

headphones, so you do not need to be concerned about

those around you (especially when it is late at night).

559a

• When you need to transport the unit, package it in the box

(including padding) that it came in, if possible. Otherwise,

you will need to use equivalent packaging materials.

562

• Use a cable from Roland to make the connection. If using

some other make of connection cable, please note the

following precautions.

• Some connection cables contain resistors. Do not use

cables that incorporate resistors for connecting to this

unit. The use of such cables can cause the sound level

to be extremely low, or impossible to hear. For infor-

mation on cable specifications, contact the manufac-

turer of the cable.

• Wrap the power cord around the cord hook when trans-

porting or storing the unit.

CUBE-20X_e.book 5 ページ２００６年７月２４日　月曜日　午後２時１１分

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Roland CUBE-20X Seite 5

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Roland CUBE-20X

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info